Yttria-stabilized zirconia (YSZ) thin films were fabricated on glass substrates by direct current magnetron reactive sputtering. We found out that the crystalline quality of the YSZ film was improved by an oxidation process of the metallic target surface prior to the sputtering deposition process. It is speculated that, at the initial stage of the sputtering, the sputtered particles from the oxidized target surface form a layer with higher degree of crystallization on the substrate, compared with those particles from the metallic target surface. This crystallized layer can enhance the crystallization of the film deposited subsequently. Other sputtering conditions such as sputtering pressure, oxygen flow rate, substrate temperature, and Y(2)O(3) content in the film were investigated, for optimization of the crystalline quality of the deposited YSZ film. (C) 2009 Elsevier B.V. All rights reserved.