Solar cells based on polycrystalline semiconductor thin films have great potential for decreasing the cost of photovoltaic energy. However, this kind of solar cells has characteristics very different from those fabricated on crystalline silicon for which the carrier-transport and behavior is clearly known. Instead, for hetero-junction solar cells made on less known polycrystalline materials the design is almost empirical. In this work, several physical aspects related to the behavior of polycrystalline thin film solar cells will be discussed, and some considerations for an adequate design of this kind of solar cells will be made. For example, the recombination at the grain boundaries and its influence on the short circuit current as a function of the crystallite sizes on the active material is considered. Based on this, the appropriate thickness of each layer and their resistivity will be discussed. As an example, these considerations will be applied to CdS/CdTe heterojunction solar cells, taking into account typical properties of CdTe thin films used for solar cells. (c) 2005 Elsevier B.V. All rights reserved.