In this contribution two ways are described, how it is possible to achieve perfectly cured and processible propellants with prilled ADN, low amounts of HMX 5 mu m mps and a binder system based on GAP diole and GAP triole oligomers with and without TMETN as a nitrate ester plasticizer. It was shown how it will be possible to suppress the strongly gas forming reaction between ADN and reactive isocyanates by a mixture of stabilizers. In this way it was possible to create minimum smoke ADN/HMX/GAP/TMETN propellants cured with the triisocyanate N100. In the second part an unconventional binder system based on the 1.3 dipolar cycloaddition reaction of azido groups with acetylene compounds forming 1,23-triazole heterocyclic rings has been applied for ADN/GAP and AP/GAP propellants. Together with small parts of HMX formulations with ADN/HMX/GAP and the corresponding AP/HMX/GAP exhibit high thermodynamic performance, are easily processible, and cure successfully at 60 degrees C. Their basic properties consisting of burning behavior and mechanical properties, at ambient temperature, chemical stability, and sensitivity have been investigated and are compared to each other.