Multidetector size exclusion chromatography (SEC) is used to simultaneously determine molecular weight and number of reactive end groups per chain (functionality) of poly(tetramethylene glycol)s. Hydroxyl groups are first quantitatively derivatized with phenyl isocyanate, providing an end-group-selective UV-absorbing tag. The number of end groups per chain is then determined from the SEC chromatogram using a UV detector. Molecular weight at each retention volume and the number-average molecular weight of the whole polymer are calculated by four methods involving (1) a concentration detector and a narrow standard log M calibration curve, (2) the UV detector and a narrow standard log M calibration, (3) a viscometry detector and a universal calibration curve, and (4) combined differential viscometry and concentration detectors using a universal calibration curve. The multidetector experiment provides a unique opportunity to assess the accuracy and limitations of each approach on low-molecular-weight polymers. In particular, the effect of end groups on the concentration detector response and the application of universal calibration principles at small molecular sizes are important factors. It is shown that the concentration response can be corrected by a simple relationship between detector response and reciprocal molecular weight. Also, the quality of calibration curves is critical to the calculation of accurate molecular weights. In general, log M calibration curves provide superior results to universal calibration methods.