화학공학소재연구정보센터
Materials Research Bulletin, Vol.41, No.3, 541-546, 2006
Solvothermal synthesis and characterization of Sb-doped SnO2 nanoparticles used as transparent conductive films
Sb-doped SnO2 (ATO) nanoparticles was synthesized at different temperatures by the solvothermal route, starting with SnCl4 center dot 5H(2)O and SbCl3. The samples were characterized by means of XRD, Mossbauer spectroscopy and TEM, the specific surface area and resistivity of samples were examined, respectively. Results showed that the mean crystallite size and resistivity of the samples increased and decreased, respectively, with the increase of the solvothermal temperature. The lowest resistivity of the samples was found at 160 degrees C, and Mossbauer spectroscopy showed that the content of Sb5+ in these samples was the highest. TEM showed that the powder was monodispersed in the range of 8-15 nm particles size. Sb-doped SnO2 thin films were prepared by spin coating process on coming 7059 glass using the ethanol suspensions of Sb-doped SnO2 naroparticles and the Hall mobility A, the carrier concentration n, the sheet resistance R-rectangle and the transmission spectra of the films were measured and investigated. (c) 2006 Published by Elsevier Ltd.