The extraction of ferulic acid, a pharmacologically active ingredient from the root of Ligusticum chuanxiong, with ultrasonic extraction was investigated. Percolation and supercritical fluid extraction (SFE) were employed to make comparisons with ultrasonic extraction. Three variables, which included the concentration of solvent, the ratio of solvent volume/sample (mL/g), and extraction time, were found to have a great influence on ultrasonic extraction. The optimum extraction was with pure ethanol with a solvent volume/sample ratio 8:1 (mL/g) and extraction time of 30 min. Under the optimum extraction conditions, the extraction yield could reach 8.8% which was higher than that using SFE with ethanol as co-solvent and a content of ferulic acid of 0.7%; both the yield and the content were higher than those obtained by percolation. Ultrasonic extraction significantly shortened the time required for the extraction process. Overall, ultrasonic extraction was shown to be highly efficient in the extraction of ferulic acid from Ligusticum chuanxiong. (C) 2008 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved.