Wetting of hydrophobic polymer surfaces commonly employed in electronic coatings and their interaction with surfactant-laden liquids and aqueous polymer solutions are analyzed using a contact angle hysteresis (CAH) approach developed by Chibowski and co-workers. In addition, a number of low surface tension acrylic monomer liquids, as well as common probe liquids are used to estimate solid surface energy of the coatings in order to facilitate a thorough analysis of surfactant effects in adhesion. Extensive literature data on contact angle hysteresis of surfactant-laden liquids on polymeric surfaces are available and are used here to estimate solid surface energy for further understanding and comparisons with the present experimental data. In certain cases, adhesion tension plots are utilized to interpret wetting of surfaces by surfactant and polymer solutions. Wetting of an ultra-hydrophobic surface with surfactant-laden liquids is also analyzed using the contact angle hysteresis method. Finally, a detailed analysis of the effect of probe liquid molecular structure on contact angle hysteresis is given using the detailed experiments of Timmons and Zisman on a hydrophobic self-assembled monolayer (SAM) surface. Hydrophobic surfaces used in the present experiments include an acetal resin [poly(oxymethylene), POM] surface, and silane, siloxane and fluoro-acrylic coatings. Model surfaces relevant to the literature data include paraffin wax, poly(methyl methacrylate) and a nano-textured surface. Based on the results, it is suggested that for practical coating applications in which surfactant-laden and acrylic formulations are considered, a preliminary evaluation and analysis of solid surface energy can be made using surfactant-laden probe liquids to tailor and ascertain the quality of the final coating.