In recent years, sisal fibres have become a promising reinforcement for composites because of their low cost, low density, high specific strength, high specific modulus, easy availability and renewability. However, the poor adhesion between the hydrophilic sisal fibre and the hydrophobic thermoplastic matrices has adversely affected the widespread use of these composites. In this study, argon and air-plasma treatments have been used to modify the fibre surfaces under suitable treatment parameters to improve the compatibility between sisal fibres and polypropylene (PP). Sisal fibres and PP fibres are blended together to form a random mat which is then vacuum hot-pressed into a preimpregnated composite sheet. Mechanical properties such as tensile strength and modulus, flexural strength and modulus, and the storage modulus of the composite sheets improve after the incorporation of plasma-treated fibres. Furthermore, scanning electron microscopy analyses reveal the increased Surface roughness of sisal fibre. Surface characterisation has been performed by X-ray photoelectron spectroscopy, showing an increase in oxygen/carbon ratio of sisal fibres after plasma treatment.