화학공학소재연구정보센터
International Polymer Processing, Vol.21, No.2, 155-163, 2006
Rheology and processing of molten poly(methyl methacrylate) resins
The rheological and processing behavior in capillary extrusion of several poly(methyl methacrylate) (PMMA) resins was studied. The rheological characterization included: (i) frequency sweep experiments at various temperatures and application of the time-temperature superposition to obtain the master curves from which the activation energy of flow was found to be independent of molecular weight, (ii) extensional measurements using the Sentmanat Extensional Rheometer (SER) where it was found that poly(methyl methacrylate) resins exhibit strain hardening effects only at high strain rates. The capillary extrusion experiments were performed for three poly(methyl methacrylate) resins using additives in order to identify suitable processing aids for PMMA resins. First it was found that poly(methyl methacrylate) polymers exhibit spiral/helical type of distortions at a critical shear stress value of about 0.35 +/- 0.03 MPa, independent of temperature and molecular weight. "Traditional" processing aids used mainly in the extrusion of polyolefins and some other commercial polymers were found ineffective in eliminating instabilities in the case of poly(methyl methacrylate) processing. On the other hand, mixing of poly(methyl methacrylate) with a proprietary blend of synthetic resins and fatty glycerides with modified organic fatty acids, MoldWiz INT-35UDH, was able to reduce the extrusion pressure and postpone the onset of gross melt fracture to higher shear rates. Finally and most importantly, the addition of different polyethylenes (LLDPE, LDPE and HDPE) resulted into a significant pressure reduction along with significant postponement of gross melt fracture to higher shear rates.