Long-chain amines, used in potash ore flotation as collectors, are insoluble in NaCl-KCl saturated brine. In commercial applications. these amines are melted at 70-90 degrees C, dispersed in acidic solution of hydrochloric or acetic acids, and such emulsions are then introduced to the flotation pulp. To model the commercial potash ore flotation process, dodecyl amine, used in this study, was melted at 70 degrees C, dispersed in hydrochloric acid aqueous solution and was added to a KCl-NaCl saturated brine at room temperature. This results in the precipitation of the amine. The present study summarizes the influence of the conditions on the particle size and morphology of the precipitating amine particles. Methyl isobutyl carbinol (MIBC), common frother in flotation processes, was shown to affect amine dispersion when added into a hot amine emulsion prior to mixing with a saturated brine. This study demonstrates that the precipitating amine particles are selectively abstracted by KCl particles, but not by NaCl particles. (C) 2009 Elsevier B.V. All rights reserved.