| 1 - 9 |
Lipid production from fed-batch fermentation of crude glycerol directed by the kinetic study of batch fermentations
Chen JX, Zhang XL, Yan S, Tyagi RD, Drogui P |
| 10 - 24 |
A review of the application of X-ray computed tomography to the study of coal
Mathews JP, Campbell QP, Xu H, Halleck P |
| 25 - 34 |
Tar conversion over olivine and sand in a fluidized bed reactor using toluene as model compound
Morin M, Nitsch X, Pecate S, Hemati M |
| 35 - 42 |
The relationship between the humic degree of oil shale kerogens and their structural characteristics
Wang Q, Hou YC, Wu WZ, Niu MG, Ren SH, Liu ZY |
| 43 - 53 |
Multi-scale quantitative characterization of 3-D pore-fracture networks in bituminous and anthracite coals using FIB-SEM tomography and X-ray mu-CT
Li ZT, Liu DM, Cai YD, Ranjith PG, Yao YB |
| 54 - 61 |
Kinetic model for liquid-phase liquefaction of asphaltene by hydrogenation with industrial distillate narrow fraction as hydrogen donor
Sheng Q, Wang G, Zhang QY, Gao CD, Duan MC, Gao JS |
| 62 - 68 |
Combustion and emission characteristics of a direct injection diesel engine fueled with biodiesel and PODE/biodiesel fuel blends
Liu HY, Ma X, Li BW, Chen LF, Wang Z, Wang JX |
| 69 - 75 |
Liquid-solid phase-change absorption of acidic gas by polyamine in nonaqueous organic solvent
Zhao WB, Zhao Q, Zhang Z, Liu JJ, Chen R, Chen Y, Chen J |
| 76 - 84 |
An integrated natural gas power cycle using hydrogen and carbon fuel cells
Zhuang Q, Geddis P, Runstedtler A, Clements B |
| 85 - 95 |
Kinetics of methane gas hydrate formation with microscale sand in an autoclave with windows
Wang WC, Jiang K, Li YX, Shi ZZ, Song GC, Duan RX |
| 96 - 108 |
Rheology of solid-like ethanol fuel for hybrid rockets: Effect of type and concentration of gellants
John J, Nandagopalan P, Baek SW, Miglani A |
| 109 - 116 |
The effects of specific surface area and ash on char gasification mechanisms in the mixture of H2O, CO2, H-2 and CO
Zhang R, Chen YF, Lei K, Liu D |
| 117 - 126 |
Reaction engineering of carbon monoxide generation by treatment with atmospheric pressure, low power CO2 DBD plasma
Liu YN, Rehman F, Zimmerman WB |
| 127 - 131 |
Deep catalytic desulphurization of heavy gas oil at mild operating conditions using self-functionalized nanoparticles as a novel catalyst
El Sayed HA, El Naggar AMA, Heakal BH, Ahmed NE, Said S, Abdel-Rahman AAH |
| 132 - 140 |
The effect of pentanol addition on the particulate emission characteristics of a biodiesel operated diesel engine
Yang K, Wei L, Cheung CS, Tang CL, Huang ZH |
| 141 - 149 |
Enzymatic butanolysis of coconut oil. Biorefinery approach
Bouaid A, Acherki H, Garcia A, Martinez M, Aracil J |
| 150 - 161 |
Evaluation of the antimicrobial activity of synthetic and natural phenolic type antioxidants in biodiesel fuel
Dodos GS, Tsesmeli CE, Zannikos F |
| 162 - 171 |
Coal washability analysis using X-ray tomographic images for different lithotypes
Liu HP, Rodrigues S, Shi FN, Esterle J, Manlapig E |
| 172 - 183 |
Significance of RON and MON to a modern DISI engine
Wang CM, Prakash A, Aradi A, Cracknell R, Xu HM |
| 184 - 193 |
Modeling, simulation and kinetic parameter estimation for diesel hydrotreating
Novaes LD, de Resende NS, Salim VMM, Secchi AR |
| 194 - 202 |
Experimental investigation into the oxidative characteristics of Tahe heavy crude oil
Li YB, Chen YF, Pu WF, Gao H, Bai BJ |
| 203 - 210 |
Estimation of the kinetic triplet for in-situ combustion of crude oil in the presence of limestone matrix
Karimian M, Schaffie M, Fazaelipoor MH |
| 211 - 223 |
Fluid distributions during light hydrocarbon charges into oil reservoirs using multicomponent Maxwell-Stefan diffusivity in gravitational field
Zuo JLY, Mullins OC, Achourov V, Pfeiffer T, Pan S, Wang K, Kollien T, di Primio R |
| 224 - 231 |
Novel concepts for onboard determination of fuel quality in plug-in hybrid cars
Eskiner M, Ammer F, Then D, Staufenbiel J, Rossner M, Schroder O, Krahl J |
| 232 - 237 |
Potential of oxymethylenether-diesel blends for ultra-low emission engines
Omari A, Heuser B, Pischinger S |
| 238 - 245 |
Heavy metals distribution characteristics of FGD gypsum samples from Shanxi province 12 coal-fired power plants and its potential environmental impacts
Hao Y, Li Q, Pan Y, Liu ZX, Wu SM, Xu YB, Qian GR |
| 246 - 253 |
Transesterification of soybean oil using a novel heterogeneous base catalyst: Synthesis and characterization of Na-pumice catalyst, optimization of transesterification conditions, studies on reaction kinetics and catalyst reusability
de Luna MDG, Cuasay JL, Tolosa NC, Chung TW |
| 254 - 264 |
Pore-scale characterization of tight sandstone in Yanchang Formation Ordos Basin China using micro-CT and SEM imaging from nm- to cm-scale
Liu XF, Wang JF, Ge L, Hu FL, Li CL, Li X, Yu J, Xu HJ, Lu SF, Xue QZ |
| 265 - 273 |
Experimental study of Polycyclic Aromatic Hydrocarbons (PAHs) in n-Heptane laminar diffusion flames from1.0 to 3.0 bar
Zhou L, Xiong GH, Zhang MJ, Chen LF, Ding SR, de Goey LPH |
| 274 - 289 |
Hydrocarbon potential and reservoir characteristics of Lower Cretaceous Garbutt Formation, Liard Basin Canada
Ardakani OH, Sanei H, Ghanizadeh A, McMechan M, Ferri F, Clarkson CR |
| 290 - 298 |
Study on the preparation, characterization of a novel solid Lewis acid Al3+-SO42-/MWCNTs catalyst and its catalytic performance for the synthesis of biodiesel via esterification reaction of oleic acid and methanol
Shu Q, Tang GQ, Liu FS, Zou WQ, He JF, Zhang CX, Zou LX |
| 299 - 308 |
Volumetric properties of 2,5-dimethylfuran in mixtures with octane or dodecane from 293 K to 393 K and pressures up to 70 MPa
Garcia-Morales R, Elizalde-Solis O, Zuniga-Moreno A, Bouchot C, Gomez-Ramos FI, Arenas-Quevedo MG |
| 309 - 314 |
Optimized synthesis method for transesterification of residual oil from palm oil mill effluent and lipase from Pacific white shrimp (Litopenaeus vannamei) hepatopancreas to environmentally friendly biodiesel
Rakkan T, Suwanno S, Paichid N, Yunu T, Klomklao S, Sangkharak K |
| 315 - 321 |
Extraction of petroleum emulsified water and characterization of major ions for the evaluation of its origin
Teixeira HMF, Duyck C, do Rosario FF, Bezerra MCM, Rocha AA, da Fonseca TCO, Saint'Pierre TD, Miekeley N |
| 322 - 328 |
The influence of ethanol-diesel blend on pollutant emissions from different bus fleets under acceleration transitions
Mata C, Gomez A, Armas O |
| 329 - 338 |
Highly porous copper oxide sorbent for H2S capture at ambient temperature
Wang J, Wang LJ, Fan HL, Wang H, Hu YF, Wang ZD |
| 339 - 349 |
Combined effect of compression ratio and diethyl ether (DEE) port injection on performance and emission characteristics of a DI diesel engine fueled with upgraded biogas (UBG)-biodiesel dual fuel
Barik D, Murugan S, Samal S, Sivaram NM |
| 350 - 357 |
Combustion characteristics of a methane engine with Air- and N-2-assisted direct injection
Song J, Park S |
| 358 - 370 |
Phase behavior of C3H8-CO2-heavy oil systems in the presence of aqueous phase under reservoir conditions
Li XL, Han HS, Yang DY, Liu XL, Qin JS |
| 371 - 382 |
TUD-1 type aluminosilicate acid catalysts for 1-butene oligomerisation
Silva AF, Fernandes A, Antunes MM, Neves P, Rocha SM, Ribeiro MF, Pillinger M, Ribeiro J, Silva CM, Valente AA |
| 383 - 393 |
Fischer-Tropsch Synthesis in supercritical Co-2 - Inhibition of Co-2 selectivity for enhanced hydrocarbon production
Benoit J, Perry D, Mondal K |
| 394 - 401 |
Evaluation of sooting tendency of acetone-butanol-ethanol (ABE) fuels blended with diesel fuel
Luo JF, Zhang YM, Zhang QX, Liu J, Wang JJ |
| 402 - 410 |
Evaluation of a hierarchically-structured CuO@TiO2-Al2O3 oxygen carrier for chemical looping with oxygen uncoupling
Tian X, Wei YJ, Zhao HB |
| 411 - 416 |
FTIR assessment and investigation of synthetic antioxidant on the fuel stability of Calophyllum inophyllum biodiesel
Shameer PM, Ramesh K |
| 417 - 423 |
A metal-organic framework for oxidative desulfurization: UIO-66(Zr) as a catalyst
Zhang XT, Huang PC, Liu AL, Zhu MY |
| 424 - 433 |
Effect of oil dispersible polymethylsilsesquioxane microspheres on the formation and breakage of model waxy oil gels
Yao B, Li CX, Yang F, Mu ZH, Zhang XP, Sun GY |
| 434 - 441 |
Effect of process conditions on the hydrothermal partial oxidation of phenanthrene as a heavy oil model structure
Arcelus-Arrillaga P, Hellgardt K, Millan M |
| 442 - 448 |
Upgrading of palm oil renewable diesel through hydroisomerization and formulation of an optimal blend
Perez W, Marin J, del Rio J, Pena J, Rios L |
| 449 - 456 |
Nanoparticles of Pd supported on bacterial biomass for hydroprocessing crude bio-oil
Kunwar B, Deilami SD, Macaskie LE, Wood J, Biller P, Sharma BK |
| 457 - 472 |
Chemical ignition delay of candidate drop-in replacement jet fuels under fuel-lean conditions: A shock tube study
Flora G, Balagurunathan J, Saxena S, Cain JP, Kahandawala MSP, DeWitt MJ, Sidhu SS, Corporan E |
| 473 - 489 |
Experiments and modeling for recovery of hydrogen and ethylene from fluid catalytic cracking (FCC) dry gas utilizing hydrate formation
Wang YW, Zhang JH, Guo XQ, Chen B, Sun Q, Liu AX, Sun CY, Chen GJ, Yang LY |
| 490 - 497 |
Potential large-volume beneficial use of low-grade fly ash in magnesia-phosphate cement based materials
Liao WY, Ma HY, Sun HF, Huang Y, Wang YC |
| 498 - 508 |
A formation water-based nutrient recipe for potentially increasing methane release from coal in situ
Bi ZT, Zhang J, Park S, Harpalani S, Liang YN |
| 509 - 520 |
Ab initio calculation and kinetic modeling study of diethyl ether ignition with application toward a skeletal mechanism for CI engine modeling
Hu EJ, Chen YL, Zhang ZH, Chen JY, Huang ZH |
| 521 - 528 |
Hydroisomerization of n-hexadecane using Pt/alumina-Beta zeolite catalysts for producing renewable diesel with low pour point
Gomes LC, Rosas DD, Chistone RC, Zotin FMZ, de Araujo LRR, Zotin JL |
| 529 - 537 |
Flame structure and laminar burning speed of gas to liquid fuel air mixtures at moderate pressures and high temperatures
Wang ZY, Alswat M, Yu GY, Allehaibi MO, Metghalchi H |
| 538 - 544 |
Synthesis of oxygenated fuel additives via glycerol esterification with acetic acid over bio-derived carbon catalyst
Okoye PU, Abdullah AZ, Hameed BH |
| 545 - 551 |
Magnetic POM-based mesoporous silica for fast oxidation of aromatic sulfur compounds
Zhang M, Wei YC, Li R, Zhu WS, Li HP, Zhang Q, Wang M, Chen X, Li HM |
| 552 - 566 |
Evaluation and genetic analysis of coal structures in deep Jiaozuo Coalfield, northern China: Investigation by geophysical logging data
Hou HH, Shao LY, Guo SQ, Li Z, Zhang ZJ, Yao ML, Zhao S, Yan CZ |
| 567 - 578 |
Nanoscale pore structure characterization of the Bakken shale in the USA
Liu KQ, Ostadhassan M, Zhou J, Gentzis T, Rezaee R |
| 579 - 586 |
Reductive de-polymerization of kraft lignin with formic acid at low temperatures using inexpensive supported Ni-based catalysts
Huang SH, Mahmood N, Zhang YS, Tymchyshyn M, Yuan ZS, Xu CB |
| 587 - 597 |
Classification of diesel and gasoline dual-fuel combustion modes by the analysis of heat release rate shapes in a compression ignition engine
Lee J, Chu S, Min K, Kim M, Jung H, Kim H, Chi Y |
| 598 - 605 |
Effect of operation temperature on anaerobic digestion of food waste: Performance and microbial analysis
Kim MS, Kim DH, Yun YM |
| 606 - 614 |
Water vapor sorption on Marcellus shale: measurement, modeling and thermodynamic analysis
Tang X, Ripepi N, Valentine KA, Keles C, Long T, Gonciaruk A |
| 615 - 623 |
When 2nd generation biofuel meets water - The water solubility and phase stability issue
Dechambre D, Thien J, Bardow A |
| 624 - 633 |
Experimental investigation of methanol compression ignition in a high compression ratio HD engine using a Box-Behnken design
Shamun S, Hasimoglu C, Murcak A, Andersson O, Tuner M, Tunestal P |
| 634 - 642 |
Effects of single-stage syngas hydrotreating on the physical and chemical properties of oxidized fractionated bio-oil
Luo Y, Hassan E, Miao P, Xu Q, Steele PH |
| 643 - 649 |
Development of a method for on-line determination of chlorine impurity in crude oil by using fast neutrons
Chang HP, Meric I, Sudac D, Nad K, Obhodas J, Gardner RP |
| 650 - 660 |
Evaluation of wettability alteration and IFT reduction on mitigating water blocking for low-permeability oil-wet rocks after hydraulic fracturing
Liang TB, Zhou FJ, Lu J |
| 661 - 673 |
The prediction of the Gieseler characteristics of coal blends
Guelton N |
| 674 - 684 |
Experimental characterization of particle-wall interaction relevant to entrained-flow gasification of biomass
Troiano M, Montagnaro F, Salatino P, Solimene R |
| 685 - 693 |
Predictive method for low load off-design operation of a lignite fired power plant
Avagianos I, Atsonios K, Nikolopoulos N, Grammelis P, Polonidis N, Papapavlou C, Kakaras E |
| 694 - 701 |
Importance of fuel in the valuation of lignite-based energy projects with risk assessment from geology to energy market
Dudek M, Krysa Z, Jurdziak L, Kawalec W |
| 702 - 712 |
The impact of various ethanol-gasoline blends on particulates and unregulated gaseous emissions characteristics from a spark ignition direct injection (SIDI) passenger vehicle
Jin DY, Choi KH, Myung CL, Lim YS, Lee JT, Park S |
| 713 - 732 |
Methanol fumigation in compression-ignition engines: A critical review of recent academic and technological developments
Yao CD, Pan W, Yao AR |
| 733 - 741 |
Studies on performance, combustion and emission of a single cylinder diesel engine fuelled with rubber seed oil and its biodiesel along with ethanol as injected fuel
Geo VE, Sonthalia A, Nagarajan G, Nagalingam B |
| 742 - 753 |
A numerical study of the effects of reformer gas composition on the combustion and emission characteristics of a natural gas/diesel RCCI engine enriched with reformer gas
Rahnama P, Paykani A, Bordbar V, Reitz RD |
| 754 - 768 |
Improvement of dual-fuel biodiesel-producer gas engine performance acting on biodiesel injection parameters and strategy
Carlucci AP, Ficarella A, Laforgia D, Strafella L |
| 769 - 775 |
Impact of propane energy fraction on diesel-ignited propane dual fuel low temperature combustion
Hodges KA, Aniello A, Krishnan SR, Srinivasan KK |
| 776 - 786 |
Ignition delay time correlation of fuel blends based on Livengood-Wu description
Khaled F, Badra J, Farooq A |
| 787 - 794 |
Effects of potassium and calcium on the early stages of combustion of single biomass particles
Carvalho A, Rabacal M, Costa M, Alzueta MU, Abian M |
| 795 - 801 |
Study on the separation and thin film deposition of tarry aromatics mixtures (soot extract and naphthalene pitch) by high-vacuum heating
Apicella B, Tregrossi A, Popa C, Mennella V, Ciajolo A, Russo C |
| 802 - 811 |
Methane production by CO2 hydrogenation reaction with and without solid phase catalysis
Falcinelli S, Capriccioli A, Pirani F, Vecchiocattivi F, Stranges S, Marti C, Nicoziani A, Topini E, Lagana A |
| 812 - 812 |
Physico-chemical properties and fuel characteristics of oxymethylene dialkyl ethers (vol 173, pg 129, 2016)
Lautenschutz L, Oestreich D, Seidenspinner P, Arnold U, Dinjus E, Sauer J |
