| 7183 - 7192 |
Surface analysis of inhibitor films formed by 1-aminoanthraquinones on API 5L-X60 steel in diesel-water mixtures
Muthukumar N, Ilangovan A, Maruthamuthu S, Palaniswamy N |
| 7193 - 7202 |
Influence of micro-structure on corrosion behavior of a Ni-based superalloy in 3.5% NaCl
Liu L, Li Y, Wang FH |
| 7203 - 7209 |
Electronically conducting montmorillonite-CU2S and montmorillonite-CU2S-polypyrrole nanocomposites
Ranaweera AU, Bandara HMN, Rajapakse RMG |
| 7210 - 7216 |
Comparative investigation on electrochemical behavior of hydroquinone at carbon ionic liquid electrode, ionic liquid modified carbon paste electrode and carbon paste electrode
Zhang Y, Zheng JB |
| 7217 - 7225 |
Improvement of the electrochemical properties of novel solid oxide fuel cell anodes, La0.75Sr0.25Cr0.5Mn0.5O3-delta and La4Sr8Ti11Mn0.5Ga0.5O37.5-delta, using Cu-YSZ-based cermets
Ruiz-Morales JC, Canales-Vazquez J, Marrero-Lopez D, Irvine JTS, Nunez P |
| 7226 - 7230 |
Comparative study of different crystallographic structure of LiNi0.5Mn1.5O4-delta cathodes with wide operation voltage (2.0-5.0 V)
Park SH, Oh SW, Kang SH, Belharouak I, Amine K, Sun YK |
| 7231 - 7247 |
High effective organic corrosion inhibitors for 2024 aluminium alloy
Lamaka SV, Zheludkevich ML, Yasakau KA, Montemor MF, Ferreira MGS |
| 7248 - 7253 |
Fabrication and characterisation of novel screen-printed tubular microband electrodes, and their application to the measurement of hydrogen peroxide
Rawson FJ, Purcell WM, Xu J, Cowell DC, Fielden PR, Biddle N, Hart JP |
| 7254 - 7261 |
Electrocrystallization of Bi on Au(111) in an acidic chloroaluminate ionic liquid
Pan GB, Freyland W |
| 7262 - 7269 |
Electrochemical synthesis of hydrogen peroxide: Rotating disk electrode and fuel cell studies
Lobyntseva E, Kallio T, Alexeyeva N, Tammeveski K, Kontturi K |
| 7270 - 7277 |
Analysis of membraneless microfuel cell using decomposition of hydrogen peroxide in a Y-shaped microchannel
Chen FL, Chang MH, Hsu CW |
| 7278 - 7285 |
Investigation of carbon-supported Pt nanocatalyst preparation by the polyol process for fuel cell applications
Oh HS, Oh JG, Hong YG, Kim HS |
| 7286 - 7292 |
Al-doped Ni-rich cathode powders prepared from the precursor powders with fine size and spherical shape
Ju SH, Jang HC, Kang YC |
| 7293 - 7299 |
Preparation of platinum-ruthenium alloys supported on carbon by a sonochemical method
Angelucci CA, Silva MD, Nart FC |
| 7300 - 7306 |
Hydrogen peroxide determination by carbon ceramic electrodes modified with pyrocatechol violet
Sheng QF, Yu H, Zheng HB |
| 7307 - 7314 |
Key role of the anchoring PEI layer on the electrochemistry of redox proteins at carbon electrodes - Consequences on assemblies involving proteins and clay
Lojou E, Bianco P |
| 7315 - 7321 |
Influences of Bentonite on conductivity of composite solid alkaline polymer electrolyte PVA-Bentonite-KOH-H2O
Sang SB, Zhang JF, Wu QM, Liao YG |
| 7322 - 7329 |
Electrosynthesis of poly(neutral red) incorporated with ferrocenesulfonic acid
Chen CX, Gao YH |
| 7330 - 7336 |
Differences in physico-mechanical behaviors of resol(e) and novolac type phenolic resin based composite bipolar plate for proton exchange membrane (PEM) fuel cell
Kakati BK, Deka D |
| 7337 - 7342 |
Characterization of high tap density Li[Ni1/3CO1/3Mn1/3]O-2 cathode material synthesized via hydroxide co-precipitation
Zhang S |
| 7343 - 7351 |
Assessment of Ba0.5Sr0.5Co1-yFeyO3-delta (y=0.0-1.0) for prospective application as cathode for IT-SOFCs or oxygen permeating membrane
Chen ZH, Ran R, Zhou W, Shao ZP, Liu SM |
| 7352 - 7361 |
Controlled multilayer films of sulfonate-capped gold nanoparticles/thionine used for construction of a reagentless bienzymatic glucose biosensor
Sun YY, Bai Y, Yang WW, Sun CQ |
| 7362 - 7371 |
Influence of pulse plating parameters on the, electrocodeposition of matrix metal nanocomposites
Thiemig D, Lange R, Bund A |
| 7372 - 7376 |
Charge/discharge characteristics of sulfur composite cathode materials in rechargeable lithium batteries
He XM, Pu WH, Ren JG, Wang L, Wang JL, Jiang CY, Wan CR |
| 7377 - 7385 |
Performance evaluation of CNT/polypyrrole/MnO2 composite electrodes for electrochemical capacitors
Sivakkumar SR, Ko JM, Kim DY, Kim BC, Wallace GG |
| 7386 - 7395 |
The influence of temperature on the anodic oxidation/dissolution of uranium dioxide
Broczkowski ME, Noel JJ, Shoesmith DW |
| 7396 - 7403 |
Hydrogen electrode reaction: A complete kinetic description
Quaino PM, de Chialvo MRG, Chialvo AC |
| 7404 - 7408 |
3-Chloroanisole for overcharge protection of a Li-ion cell
Lee YG, Cho J |
| 7409 - 7411 |
Voltage of a solid electrolyte galvanic cell in terms of the activity of the mobile species of the electrolyte
Nafe H |
