385 - 393 |
Pt-Co/C nanoparticles as electrocatalysts for oxygen reduction in H2SO4 and H2SO4/CH3OH electrolytes Lima FHB, Lizcano-Valbuena WH, Teixeira-Neto E, Nart FC, Gonzalez ER, Ticianelli EA |
394 - 401 |
Performance degradation studies on PBI/H3PO4 high temperature PEMFC and one-dimensional numerical analysis Hu JW, Zhang HM, Zhai YF, Liu G, Hu J, Yi BL |
402 - 407 |
The observation of the nucleation and growth of electrolessly plated nickel deposited from different bath pH by TEM and QCM method Matsubara H, Yonekawa T, Ishino Y, Saito N, Nishiyama H, Inoue Y |
408 - 414 |
Cu(II) complexes as receptor molecules for development of new chloride sensors Mahajan RK, Kaur R, Tabassum S, Arjmand F, Mathur S |
415 - 426 |
The effect of Cu-rich sub-layer on the increased corrosion resistance of Cu-xZn alloys in chloride containing borate buffer Milosev I, Mikic TK, Gaberscek M |
427 - 433 |
Fabrication and characterization of planar reference electrode for on-chip electroanalysis Sun XJ, Wang M |
434 - 442 |
Electrode passivation caused by polymerization of different phenolic compounds Ferreira M, Varela H, Torresi RM, Tremiliosi G |
443 - 449 |
PE-g-MMA polymer electrolyte membrane for lithium polymer battery Gao K, Hu XG, Yi TF, Dai CS |
450 - 454 |
The effect of Co-Co3O4 coating on the electrochemical properties of Si as an anode material for Li ion battery Kang YM, Lee SM, Sung MS, Jeong GJ, Kim JS, Kim SS |
455 - 465 |
Electrochemical preparation of epinephrine/Nafion chemically modified electrodes and their electrocatalytic oxidation of ascorbic acid and dopamine Chen SM, Chen JY, Vasantha VS |
466 - 473 |
The influence of a new fabrication procedure on the catalytic activity of ruthenium-selenium catalysts Cheng H, Yuan W, Scott K |
474 - 480 |
Influence of composition on corrosion behavior of as-cast Cu-Zr alloys in HCl solution Lu HB, Li Y, Wang FH |
481 - 490 |
Effect of Bi(III) concentration on the stripping voltammetric response of in situ bismuth-coated carbon paste and gold electrodes Baldrianova L, Svancara I, Vlcek M, Economou A, Sotiropoulos S |
491 - 498 |
Comparative study of carbon-supported Pt/Mo-oxide and PtRu for use as CO-tolerant anode catalysts Ioroi T, Akita T, Yamazaki S, Siroma Z, Fujiwara N, Yasuda K |
499 - 503 |
Ferrocene sulfonates as electrocatalysts for sulfide detection Lawrence NS, Tustin GJ, Faulkner M, Jones TGJ |
504 - 510 |
A sodium layered manganese oxides as 3 V cathode materials for secondary lithium batteries Bach S, Pereira-Ramos JP, Willmann P |
511 - 518 |
Electrochemical reduction of 2-nitroimidazole in aprotic medium: Influence of its dissociation equilibrium on the reduction mechanism Squella JA, Campero A, Maraver J, Carbajo J |
519 - 526 |
Electrochemical and corrosion studies of poly(nickel-tetraaminophthalocyanine) on carbon steel Maranhao SLA, Guedes IC, Anaissi FJ, Toma HE, Aoki IV |
527 - 537 |
The conductivity and characterization of the plasticized polymer electrolyte based on the P(AN-co-GMA-IDA) copolymer with chelating group (II): The effect of free ion in the plasticized polymer electrolyte Liang YH, Wang CC, Chen CY |
538 - 545 |
Improving the formation and protective properties of silane films by the combined use of electrodeposition and nanoparticles incorporation Liu L, Hu JM, Zhang JQ, Cao CN |
546 - 551 |
Corrosion of stainless steels covered by exopolymers Cristobal AB, Arenas MA, Conde A, de Damborenea J |
552 - 559 |
Reconsidering differential aeration cells Martins JI, Nunes MC |
560 - 566 |
The role of textural characteristics and oxygen-containing surface groups in the supercapacitor performances of activated carbons Centeno TA, Stoeckli F |
567 - 574 |
Selective NO reduction using blue ferrocenyl cation Vergheese TM, Berchmans S |
575 - 580 |
Ru(bpy)(3)(2+)-doped silica nanoparticle DNA probe for the electrogenerated chemiluminescence detection of DNA hybridization Chang Z, Zhou JM, Zhao K, Zhu NN, He PG, Fang YZ |
581 - 588 |
Characterization of membrane-electrode assembly with hydrogen-hydrogen cell and ac-impedance spectroscopy. Part II. Modeling Himanen O, Hottinen T |
589 - 594 |
Simultaneous determination of dinitrophenol isomers with electrochemical method enhanced by surfactant and their mechanisms research Wang XG, Wu QS, Liu WZ, Ding YP |
595 - 603 |
Quantitative characterization of polyaniline films using Raman spectroscopy I: Polaron lattice and bipolaron Bernard MC, Hugot-Le Goff A |
604 - 613 |
The application of flow dispersion models to the FM01-LC laboratory filter-press reactor Trinidad P, de Leon CP, Walsh FC |
614 - 622 |
Possible interference in the sequential voltammetric determination at trace and ultratrace concentration level of platinum group metals (PGMs) and lead - Application to environmental matrices Locatelli C |
623 - 629 |
Kinetics and mechanism of oxygen reduction at hydrous oxide film-covered platinum electrode in alkaline solution Chang CC, Wen TC |
630 - 635 |
Three-dimensional electrochemical microfabrication of n-GaAs using L-cystine as a scavenger Zhang L, Ma XZ, Tang J, Qu DS, Ding QY, Sun LN |
636 - 642 |
Electrolyte additive trimethyl phosphite for improving electrochemical performance and thermal stability of LiCoO2 cathode Xu HY, Xie S, Wang QY, Yao XL, Wang QS, Chen CH |
643 - 648 |
Preparation, morphology and electrochemical characteristics of LiNi1/3Mn1/3Co1/3O2 with LiF addition Li DC, Sasaki Y, Kobayakawa K, Noguchi H, Sato Y |
649 - 657 |
Characterization of bismuth adatom-modified palladium electrodes - The electrocatalytic oxidation of aliphatic aldehydes in alkaline solutions Casella IG, Contursi M |
658 - 664 |
Growth of passive layers on nickel during their voltammetric anodic dissolution in a weakly acid medium Gregori J, Garcia-Jareno JJ, Gimenez-Romero D, Vicente F |
665 - 674 |
Synergistic effect of a catechin-immobilized poly(3,4-ethylenedioxythiophene)-modified electrode on electrocatalysis of NADH in the presence of ascorbic acid and uric acid Vasantha VS, Chen SM |
675 - 680 |
An in situ Raman study of the intercalation of supercapacitor-type electrolyte into microcrystalline graphite Hardwick LJ, Hahn M, Ruch P, Holzapfel M, Scheifele W, Buqa H, Krumeich F, Novak P, Kotz R |
681 - 687 |
A flow model of porous anodic film growth on aluminium Garcia-Vergara SJ, Skeldon P, Thompson GE, Habazaki H |
688 - 693 |
Preparation of poly(acrylonitrile-butyl acrylate) gel electrolyte for lithium-ion batteries Tian Z, He XM, Pu WH, Wan CR, Jiang CY |
694 - 703 |
Viewing nanocrystalline TiO2 photoelectrodes as three-dimensional electrodes: Effect of the electrolyte upon the photocurrent efficiency Solarska R, Augustynski J, Sayama K |
704 - 709 |
One step fabrication and characterization of platinum nanopore electrode ensembles formed via amphiphilic block copolymer self-assembly Wang CY, Shao XQ, Liu QX, Mao YD, Yang GJ, Xue HG, Hu XY |
710 - 714 |
Electrochemical behavior of Fe(II) in acetamide-urea-NaBr-KBr melt and magnetic properties of inductively codeposited Nd-Fe film Liu P, Du YP, Yang QQ, Li GR, Tong YX |
715 - 722 |
Effects of lithium ion-pairing on the electrochemical oxidation of 4-hydroxycinnamate derivatives Neudorffer A, Fleury MB, Desvergne JP, Largeron M |
723 - 727 |
Effects of dopants on percolation behaviors and gas sensing characteristics of polyaniline film Xu K, Zhu LH, Li J, Tang HQ |
728 - 735 |
Quantitative characterization of polyaniline films using Raman spectroscopy II. Effects of self-doping in sulfonated polyaniline Bernard MC, Hugot-Le Goff A |
736 - 741 |
PVC-based membranes of dicyclohexano-24-crown-8 as Cd(II) selective sensor Gupta VK, Jain AK, Kumar P |