| 3179 - 3189 |
Objectives, challenges, and prospects of batch processes: Arising from injection molding applications
Zhou Y, Cao Z, Lu J, Zhao C, Li D, Gao F |
| 3190 - 3203 |
Dynamic simulation and control of a triple column process for dimethyl carbonate-methanol separation
Wei HM, Gao Q, Jiao WZ, Wei W |
| 3204 - 3213 |
Process modeling of syngas conversion to ethanol and acetic acid via the production of dimethyl ether and its carbonylation
Kim SW, Jung HS, Lee WB, Bae JW, Park MJ |
| 3214 - 3226 |
Cavitation cloud dynamic characteristics of dual-chamber self-excited oscillatory waterjet
Li D, Kang Y, Shi H, Hu Y, Liu Q, Li H, Hu J, Li J |
| 3227 - 3245 |
Numerical investigation and deep learning-based prediction of heat transfer characteristics and bubble dynamics of subcooled flow boiling in a vertical tube
Eskandari E, Alimoradi H, Pourbagian M, Shams M |
| 3246 - 3260 |
Boiling heat transfer characteristics of bionic flower bud structure microchannels
Tang Z, Wang C, Qi C, Wang Y, Chen L |
| 3261 - 3266 |
Acoustic bubble array-induced jet flow for cleaning particulate contaminants on semiconductor wafers
Kim DE, Hong JW, Chung SK |
| 3267 - 3276 |
Enhanced photocatalytic activity over ZnO supported on calcium sulfate whisker derived from desulfurization gypsum
Lin S, Tian Y, Zhang W, Zhao T, Zhao M, Wang H |
| 3277 - 3285 |
Controllable synthesis of zinc oxide with ionic liquid and supramolecular gel as co-template for the degradation of organic dyes
Li Z, Sun L, Zhang J, Tang S |
| 3286 - 3294 |
The effect of concentration of silica nanoparticles surface-modified by zwitterionic surfactants for enhanced oil recovery (EOR)
Son HA, Jang YH, Lee TH |
| 3295 - 3304 |
Cell performance and polarization analysis on different operating conditions in anion exchange membrane-unitized regenerative fuel cells (AEM-URFCs)
Rana MM, Park GS, Sun HJ, Rim HR, Lee HK, Shim JP |
| 3305 - 3314 |
Sb-Fe bimetallic non-aqueous phase desulfurizer for efficient absorption of hydrogen sulfide: A combined experimental and DFT study
Liu Z, Qiu K, Dong Y, Jin Z, Liu L, Wu J |
| 3315 - 3322 |
Performance evaluation of zero-gap vanadium redox flow battery using composite electrode consisting of graphite and buckypaper
Hyun KH, Shin MG, Kwon YC |
| 3323 - 3333 |
A facile method for efficient synergistic oxidation of Fe2+ in phosphorus-sulfur mixed acid system with a mixture of oxygen and ozone
Liu DY, Lou WB, Sun SN, Zhang Y, Zhang Y, Zheng SL |
| 3334 - 3342 |
Visible light photocatalytic activity of TiO2 with carbon-fluorine heteroatoms simultaneously introduced by CF4 plasma
Lee RE, Lim CH, Lee HR, Kim SJ, Lee YS |
| 3343 - 3349 |
Effects of cobalt oxide catalyst on pyrolysis of polyester fiber
Park CY, Lee NY, Cho IS, Ahn BM, Yu HK, Lee JH |
| 3350 - 3360 |
Heavy metal removal from aqueous solution by granular hydrated Portland cement
Cheng P, Ren Y, Yang L, Li R, Wang X, Li B, Yuan H |
| 3361 - 3368 |
The modelling of biosorption for rapid removal of organic matter with activated sludge biomass from real industrial effluents
Domanovac MV, Runjavec MS, Meštrović E |
| 3369 - 3376 |
Destruction of oxytetracycline using a microwave-assisted fused TiO2 photocatalytic oxidation system
Park JG, Park YK, Jung SC |
| 3377 - 3388 |
Construction of g/C3N4-ZnO composites with enhanced visible-light photocatalytic activity for degradation of amoxicillin
Sun S, Li S, Hao Y, Yang X, Dou X |
| 3389 - 3398 |
Process synthesis and optimization for the isolation and purification of paclitaxel from Taxus chinensis
Min HS, Kim JH |
| 3399 - 3411 |
Reactive extraction evaluation for vanadium (V) removal in the MRDC column using axial dispersion and central composition approach
Shakib B, Asadollahzadeh M, Outokesh M, Torkaman R, Torab-Mostaedi M |
| 3412 - 3421 |
Phase equilibria and thermodynamic properties in the o-dichlorobenzene - m-dichlorobenzene system
Samukov K, Maksimov A, Belova E, Bubenchikov M, Uspenskaya I |
| 3422 - 3433 |
Liquid-liquid equilibrium (LLE) data of ternary mixtures of [water+acetic acid+1-nonanol] and [water+acetic acid+1-decanol] at 298.2-318.2 K and 101.3 kPa
Seo WW, Yim JH, Lim JS, Choi KY |
| 3434 - 3441 |
Study on temperature characteristics of gasoline engine particulate filters during fuel cut-off
Li N, Nan Z, Zhang Q, Liu H, Hua L, Zhang C |
| 3442 - 3451 |
Effective separation of Zn, Fe, and Mn from roasting-water leaching solution of blast-furnace dust using a precipitation-solvent extraction process
Ju J, Feng Y, Li H, Wang B |
| 3452 - 3463 |
Predictions of thermodynamic properties of pure fluids, refrigerants, and binary mixtures using modified Peng-Robinson equation of state
Ghoderao PNP, Narayan M, Dalvi VH, Byun HS |
| 3464 - 3472 |
Comprehensive evaluation of high-temperature sintering behavior of sea sand vanadia-titania magnetite based on grey relational analysis
Xing ZX, Huang Z, Cheng GJ, Yang H, Xue XX, Zhang GD |
| 3473 - 3481 |
Synthesis of fluorescent dye-embedded silica nanoparticles for vitamin D3 detection using sandwich-like assay
Lee NH, Kim SS, Lee KH, Lee SM, Lee DW |
| 3482 - 3496 |
New understanding of the effect of particle mass loading on the performance of a square cyclone at low and high gas temperatures
Hosseini E, Fatahian H, Fatahian E |
