11 - 17 |
Utilization of micromixers for extraction processes Benz K, Jackel KP, Regenauer KJ, Schiewe J, Drese K, Ehrfeld W, Hessel V, Lowe H |
19 - 22 |
The influence of adsorbed solvent (lyospheres) on the stability of colloids Ruffmann B, Zimehl R |
22 - 27 |
Membrane coalescence for phase separation of oil-in-water emulsions stabilized by surfactants and dispersed into smallest droplets Hoffmann S, Nitsch W |
27 - 31 |
Diesel oil from natural gas by Fischer-Tropsch synthesis using nitrogen-rich syngas Jess A, Hedden K, Popp R |
31 - 34 |
Prognosis of course and degree of microbial degradation Federbusch U, Albrecht KF, Miethe D, Babel W |
35 - 40 |
Comparison of design and operation strategies for temperature control during selective catalytic reduction of NOx Jirat J, Stepanek F, Marek M, Kubicek M |
41 - 44 |
Partial oxidation of propane using dense carbon dioxide Martin A, Kerler B |
45 - 49 |
Hydrodynamic vibrational device for enhancement of heating of viscous fluids Grinis L, Ladishensky I, Korin E |
51 - 57 |
Catalyst layer models for proton exchange membrane fuel cells Chan SH, Tun WA |
59 - 67 |
Methods for the quantitative characterization of the CO tolerance in a one-dimensional polymer electrolyte fuel cell Gubler L, Scherer GG, Wokaun A |
69 - 70 |
Piezoelectric single nozzle droplet generator for production of monodisperse droplets of variable diameter Ulmke N, Mietschke M, Bauckhage K |
71 - 76 |
Gas holdup in circulating bubble columns with pseudoplastic liquids Al-Masry WA |
77 - 84 |
Influence of pressure on the hydrodynamics and mass transfer parameters of an agitated bubble reactor Maalej S, Benadda B, Otterbein M |
85 - 90 |
Heat transfer in the downer and the riser of a circulating fluidized bed - A comparative study Ma YL, Zhu J |
91 - 95 |
A study on recovery of gold from decopperized anode slime Donmez B, Sevim F, Colak S |
97 - 101 |
Modeling of the oxygen transfer characteristics of a 'see-saw' bioreactor Saha G, Barua A, Sinha S, Bhattacharyya BC, Ray S |