913 - 922 |
Instability due to viscosity stratification downstream of a centerline injector Cao Q, Ventresca AL, Sreenivas KR, Prasad AK |
923 - 939 |
Spray characteristics of two-phase feed nozzles Ariyapadi S, Balachandar R, Berruti F |
940 - 948 |
The effect of bed temperature on mass transfer between the bubble and emulsion phases in a fluidized bed Wu WY, Agarwal PK |
949 - 956 |
Mechanism of local fluidization in converging packed beds Zhang BQ, Liu XF, Zhu HM |
957 - 962 |
Hydrodynamic model for horizontal two-phase flow through porous media Iliuta I, Fourar M, Larachi F |
963 - 967 |
Optimal design and optimal operation of separate heat pump distillation Zhu P, Feng X |
968 - 972 |
Further understanding of the chemistry of manganese-induced peroxide decomposition Wekesa M, Ni YH |
973 - 980 |
Catalysis of gas hydrates by biosurfactants in seawater-saturated sand/clay Rogers RE, Kothapalli C, Lee MS, Woolsey JR |
981 - 992 |
Mechanistic modelling of the catalytic pyrolysis of methylcyclohexane Singh OV, Pant KK |
993 - 997 |
Bitumen recovery with oily air bubbles Wallwork V, Xu ZH, Masliyah J |
998 - 1010 |
Spiral wound reverse osmosis modules decomposition into elementary units by analyzing stimulus response experiments: Characterization of the solute transfer across the membrane Roth E, Fabre B, Accary A |
1011 - 1018 |
Enhanced production of podophyllotoxin by fed-batch cultivation of Podophyllum hexandrum Chattopadhyay S, Bisaria VS, Bhojwani SS, Srivastava AK |
1019 - 1031 |
Extended linear QDMC of a gibbsite crystalliser: a simulation study Tadayon A, Tade MO, Ang HM |
1032 - 1040 |
Modelling and control of an industrial multiple-effect evaporator system Costa AOS, Lima EL |
1041 - 1051 |
On-line tuning of model predictive controllers using fuzzy logic Ali E, Al-Ghazzawi A |
1052 - 1057 |
The tank drainage problem revisited: Do these equations actually work? Joye DD, Barrett BC |
1058 - 1061 |
Slip flow in ducts Wang CY |
1062 - 1066 |
Rheology of glaze suspensions Savarmand S, Golkar-Narenji MR, Saedi K |
1067 - 1074 |
A rheological model for the interface of immiscible polymer melt in blending process Zhou CX, Yu W |
1075 - 1082 |
Studies on the effects of certain non-dimensional groups on dynamic simultaneous adsorption behaviour of carbon dioxide and moisture in molecular sieve, SA Ghoshal AK, Samanta AN, Maiti BR |
1083 - 1086 |
Gypsum scale formation in white water of a closed-cycled paper mill Choi SJ, Kim HY, Kim YH, Park H, Englezos P |
1087 - 1091 |
Energy efficiency of an indirect thermally coupled distillation sequence Hernandez S, Pereira-Pech S, Jimenez A, Rico-Ramirez V |
1092 - 1100 |
Convergence promotion in the Wang-Henke tridiagonal matrix method Monroy-Loperena R, Flores-Sanchez P |
1101 - 1108 |
Closed-loop fault detection using the local approach Cheng LL, Kwok KE, Huang B |
1109 - 1118 |
Non-linear predictive control of a three-phase catalytic reactor Costa AC, Filho RM |
1119 - 1119 |
God: "The sky is not the limit" Tamir A |