| 273 - 281 |
Factors Influencing the Efficacy of an Interfacial Modifier for the Interface in an Immiscible Polymer Blend
Favis BD, Cigana P, Matos M, Tremblay A |
| 282 - 289 |
Pressure Drops in Gas-Liquid Flow in a 15 cm Reciprocating Plate Column
Baird MH, Rao NV |
| 290 - 298 |
Liquid Circulation and Mixing in an Inclined Bubble-Column
Lu GZ, Bittorf K, Thompson BG, Gray MR |
| 299 - 306 |
Gas-Liquid Dispersion and Mixing Characteristics and Heat-Transfer in a Stirred Vessel
Xu GJ, Li YM, Hou ZZ, Feng LF, Wang K |
| 307 - 316 |
The Mean Flow-Field Generated by a Pitched Blade Turbine - Changes in the Circulation Pattern Due to Impeller Geometry
Mao DM, Feng LF, Wang K, Li YL |
| 317 - 326 |
Modeling a Circulating Fluidized-Bed Riser Reactor with Gas-Solids Downflow at the Wall
Puchyr DM, Mehrotra AK, Behie LA, Kalogerakis NE |
| 327 - 332 |
Prediction of Optimum Operating-Conditions of Liquid Fluidized-Bed Systems
Jamialahmadi M, Malayeri MR, Mullersteinhagen H |
| 333 - 338 |
Liquid-Solid Mass-Transfer at Vertical Screens in Bubble-Columns
Zaki MM, Nirdosh I, Sedahmed GH |
| 339 - 345 |
Study of Humic-Acid Adsorption on Nanofiltration Membranes by Contact-Angle Measurements
Bouchard CR, Jolicoeur J, Kouadio P, Britten M |
| 346 - 352 |
Investigation of Coke Extraction from Zeolite-Hy Under Supercritical and Near-Critical Conditions
Niu FH, Hofmann H |
| 353 - 361 |
Study on a Cool Storage-System Using HCFC (Hydro-Chloro-Fluoro-Carbon)-141B(Cci2Fch3) (1,1-Dichloro-1-Fluoro-Ethane) Clathrate
Tanii T, Minemoto M, Nakazawa K, Ando Y |
| 362 - 368 |
Absorption with Zero and Pseudo-Zero Order Chemical-Reaction
Prisciandaro M, Pepe F |
| 369 - 378 |
The Catalytic Oxidative Coupling of Methane .2. Axial Gas Sample Probing in a Bubbling Fluidized-Bed Reactor and the Effect of Side Reactions
Do KT, Edwards JH, Tyler RJ |
| 379 - 390 |
Recovery, Characterization and Conceptual Modeling of Non-Bituminous Organic Materials from Oil Sands
Sengupta S, Tollefson EL, Dalai AK |
| 391 - 401 |
Conversion of Canola Oil to Various Hydrocarbons over Pt/HZSM-5 Bifunctional Catalyst
Katikaneni SP, Adjaye JD, Bakhshi NN |
| 402 - 413 |
Effect of Process Variables on Scale Formation in Steel Reheating
Ormerod RC, Becker A, Grandmaison EW, Pollard A, Sobiesiak A |
| 414 - 421 |
Study on the Optimal Operating Conditions for the Synthesis of 2-Furyloxirane Using Empirical and Mechanistic Models
Uhlemann J, Borredon E, Gaset A |
| 422 - 436 |
Choosing the Right Model - Case-Studies on the Use of Statistical-Model Discrimination Experiments
Burke AL, Duever TA, Penlidis A |
| 437 - 451 |
Optimized Design of Waste-Water Treatment Systems - Application to the Mechanical Pulp and Paper-Industry .1. Design and Cost Relationships
Fels M, Pinter J, Lycon DS |
| 452 - 459 |
Slugging Characteristics of Group-D Particles in Fluidized-Beds
Dimattia DG, Amyotte PR, Hamdullahpur F |
| 460 - 465 |
Minimum Spouting Velocity of Conical Spouted Beds
Bi HT, Macchi A, Chaouki J, Legros R |
| 466 - 470 |
3-Dimension Imaging of Particle Clusters in Dilute Gas-Solid Suspension Flow
Tsukada M, Ito M, Kamiya H, Horio M |
| 471 - 475 |
Vapor Permeation Applied for the Separation of Water from Organic-Compounds and Gases Using Asymmetric Polyetherimide/Polyvinylpyrrolidone Capillary Tubes
Cranford RJ, Roy C, Matsuura T |
| 476 - 479 |
On Bitumen Liberation from Oil Sands
Basu S, Nandakumar K, Masliyah JH |
