1 - 6 |
Sliding wear behavior of HVOF sprayed WC-(nano-WC-Co) coating at elevated temperatures Mi PB, Zhao HJ, Wang T, Ye FX |
7 - 11 |
Synthesis of graphene via ultra-sonic exfoliation of graphite oxide and its electrochemical characterization Asgar H, Deen KM, Riaz U, Rahman ZU, Shah UH, Haider W |
12 - 20 |
Dual role of Y1.86WO6(Eu-0.14)(3+) phosphor compound to improve the efficiency of dye-sensitized solar cells Ramkumar S, Llanos J, Espinoza D, Manidurai P |
21 - 28 |
Improved kinetics of nanoparticle-decorated Mg-Ti-Zr nanocomposite for hydrogen storage at moderate temperatures Chen CG, Wang JL, Wang H, Liu T, Xu L, Li XG |
29 - 34 |
High energy storage density and rapid discharge speed of niobosilicate glasses Liu JR, Yang K, Zhai JW, Shen B, Wang HT, Li F |
35 - 39 |
Influence of surface stoichiometry and quantum confinement on the electronic structure of small diameter InxGa1-xAs nanowires Razavi P, Greer JC |
40 - 47 |
Upconversion luminescence of Ba9Y2Si6O24:Yb3+-Ln(3+) (Ln = Er, Ho, and Tm) phosphors for temperature sensing Zhang J, Li XW, Chen GB |
48 - 55 |
Leakage current and breakdown behavior of bismuth-doped amorphous strontium titanate thin film Yao MW, Li QX, Li F, Peng Y, Su Z, Yao X |
56 - 63 |
A triphenylamine substituted quinacridone derivative for solution processed organic light emitting diodes da Cunha MP, Do TT, Yambem SD, Pham HD, Chang S, Manzhos S, Katoh R, Sonar P |
64 - 70 |
Polycyclic silicone polymer as novel single source precursor for the facile synthesis of nanostructured SiC Indulekha K, Rajeev RS, Ninan KN, Gouri C |
71 - 75 |
Temperature dependence of direct and indirect band gaps of Bi13I2S18 hexagonal rod crystals Chen YH, Ho CH |
76 - 84 |
Improvement of the optical and photocatalytic properties of ZnSe QDs by growth of ZnS shell using a new approach Dehghan F, Molaei M, Amirian F, Karimipour M, Bahador AR |
85 - 93 |
Constrained groove pressing, cold-rolling, and post-deformation isothermal annealing: Consequences of their synergy on material behavior Pouraliakbar H, Jandaghi MR, Heidarzadeh A, Jandaghi MM |
94 - 102 |
Investigation of the thermophysical properties and stability performance of non-covalently functionalized graphene nanoplatelets with Pluronic P-123 in different solvents Shazali SS, Amiri A, Zubir MNM, Rozali S, Zabri MZ, Sabri MFM, Soleymaniha M |
103 - 109 |
X-ray absorption fine structure investigation of the local structure of SnO2-doped ZnO films Lee IJ, Park J, Sung NE, Kim J |
110 - 115 |
Dielectric properties of Ln(2)O(3)-WO3 ceramics at microwave frequencies Chen JQ, Fang L, Xiang HC, Li CC |
116 - 123 |
Effect of ZrO2 contents and ageing times on mechanical and electrical properties of Al-4.5 wt.% Cu nanocomposites prepared by mechanical alloying Taha MA, Elkomy GM, Mostafa HA, Gouda E |
124 - + |
Fast and cost-effective preparation of antimicrobial zinc oxide embedded in activated carbon composite for water purification applications Huang TT, Zhou R, Cui JQ, Zhang J, Tang XS, Chen S, Feng JJ, Liu HJ |
130 - + |
Photocatalytic and antibacterial properties of copper hydroxyphosphate with hierarchical superstructures synthesized by a hydrothermal method Zhang HP, Tang PF, Li DL, Tang YH |
136 - 143 |
Enhanced reliability of LEDs encapsulated with surface-modified zirconia/silicone hybrids under thermal shock Lin YT, Li YH, Lei IA, Kuo CY, Lee CF, Chiu WY, Don TM |
144 - 149 |
Comparison study on the oxidation behavior of WN and WCN ceramic coatings during heat treatment Zhao HJ, Yu LH, Ye FX |
150 - 157 |
Shape-controlled synthesis of Cu-Ni nanocrystals Wu DF, Tan QQ, Hu LC |
158 - 165 |
Effect of calcination parameters on behavior of bone hydroxyapatite in artificial saliva and its biosafety Sobczak-Kupiec A, Olender E, Malina D, Tyliszczak B |
166 - 173 |
Influence of sintering process parameters on corrosion and wear behaviour of SAF 2205 reinforced with nano-sized TiN Oke SR, Ige OO, Falodun OE, Obadele BA, Mphahlele MR, Olubambi PA |
174 - 185 |
Facile synthesis of cation doped ZnO-ZnCo2O4 hetero-nanocomposites for photocatalytic decomposition of aqueous organics under visible light Goswami K, Ananthakrishnan R, Mandal S |
186 - 192 |
High-temperature sulfur corrosion behavior of h-BN-based ceramic coating prepared by slurry method Wang JQ, Yuan YC, Chi ZH, Zhang GX |
193 - 203 |
Effects of silicon powder content on the properties and interface bonding of nitrided Al2O3-C refractories Ding J, Yu C, Liu JP, Deng CJ, Zhu HX |
204 - 212 |
Ionic silsesquioxane-capped Au nanoparticle powders: Application in P3HT/PCBM solar cells and the effect of the capping layer on surface plasmon dumping de Antoni LO, de Menezes EW, Loguercio LF, Rodrigues MRF, de Andrade RL, Costa TMH, Benvenutti EV, Santos JFL, Santos MJL |
213 - 223 |
Silicone copolymers bearing reactive vinyl and hydride functionalities: Synthesis, characterisation and particulate composite thereof for specialty applications Indulekha K, Roy RE, Vishnu AG, Rajeev RS, Ninan KN, Gouri C |
224 - 231 |
New-route synthesis of N-doped TiO2 via exposing the TiCl3 precursor to non-thermal quenched plasma at various times Mbouopda AP, Acayanka E, Boyom-Tatchemo FW, Kamgang GY, Nzeufa AM, Laminsi S, Richard D |
232 - 242 |
Probing the corrosion mechanism of zinc under direct current electric field Zhang X, Zhang JX, Dai NW, Yang Y, Yuan XJ, Cao FH, Zhang JQ |
243 - 250 |
Roles of filler dimensions, interphase thickness, waviness, network fraction, and tunneling distance in tunneling conductivity of polymer CNT nanocomposites Zare Y, Garmabi H, Rhee KY |
251 - 258 |
Electromagnetic interference shielding of polycarbonate/GNP nanocomposites in X-band Nimbalkar P, Korde A, Goyal RK |
259 - 269 |
Outstanding performance supercapacitor based on the ternary graphene-silver-polypyrrole hybrid nanocomposite from-45 to 80 degrees C Wu XM, Meng L, Wang QG, Zhang WZ, Wang Y |
270 - 276 |
Alkali treated Ti3C2Tx MXenes and their dye adsorption performance Zheng W, Zhang PG, Tian WB, Qin X, Zhang YM, Sun ZM |