1 - 1 |
ICMCTF 2013-Preface Aouadi S, Broitman E, Kodambaka S, Stuber M, Veprek S, Petrov I |
2 - 7 |
Influence of sputtering pressure on the structural, optical and hydrophobic properties of sputtered deposited HfO2 coatings Dave V, Dubey P, Gupta HO, Chandra R |
8 - 11 |
Influence of the parameters of fabrication on the optical properties of Bi1.7Ti2O6.624 thin films Pinzon MJ, Alfonso JE, Olaya JJ |
12 - 17 |
Carrier transport and photoluminescence properties of Ga-doped ZnO films grown by ion-plating and by atmospheric-pressure CVD Terasako T, Ogura Y, Fujimoto S, Song H, Makino H, Yagi M, Shirakata S, Yamamoto T |
18 - 21 |
Electrical properties of ZnO thin films grown on a-plane sapphire substrates using catalytically generated high-energy H2O Yamaguchi N, Takeuchi T, Nagatomi E, Kato T, Umemoto H, Yasui K |
22 - 29 |
Transmission optimization of multilayer OLED encapsulation based on spectroscopic ellipsometry To CH, Wong FL, Lee CS, Zapien JA |
30 - 35 |
Fabrication and characterization of high-efficiency CdTe-based thin-film solar cells on commercial SnO2:F-coated soda-lime glass substrates Paudel NR, Yan YF |
36 - 41 |
Investigation on plasma treatment for transparent Al-Zn-Sn-O thin film transistor application Chang CH, Liu PT |
42 - 45 |
Vertically aligned carbon nanotubes/diamond double-layered structure for improved field electron emission stability Yang L, Yang Q, Zhang C, Li YS |
46 - 49 |
Effects of co-sputtering powers on the properties of silicon-incorporated zinc oxide used as a channel layer of thin film transistors Lee SH, Kim W, Park JS |
50 - 53 |
Effect of palladium content on microstructures, electrical and optical properties of NiO films by rf sputtering Chen SC, Kuo TY, Lin YC, Hsu SW, Lin HC |
54 - 58 |
Investigation on amorphous InGaZnO based resistive switching memory with low-power, high-speed, high reliability Fan YS, Liu PT, Hsu CH |
59 - 64 |
Effect of Sn-layer addition to precursors on characteristics of Cu2ZnSn(S,Se)(4) thin-film solar cell absorber Kim S, Oh M, Kim WK |
65 - 69 |
Effect of the thin Ga2O3 layer in n(+)-ZnO/n-Ga2O3/p-Cu2O heterojunction solar cells Minami T, Nishi Y, Miyata T |
70 - 73 |
Effects of intermediate GAZO layer thickness on the properties of GAZO/Ag/GAZO/Ag/GAZO film Jung YS, Choi HW, Kim KH |
74 - 78 |
Fabrication and characterizations of ZnO nanorods/Au nanoparticle composites on the electropolished Ti substrate Chen H, Yeh YM, Chen JZ, Liu SM, Huang BY, Wu ZH, Tsai SL, Chang HW, Chu YC, Liao CH |
79 - 86 |
Why does titanium alloy wear cobalt chrome alloy despite lower bulk hardness: A nanoindentation study? Moharrami N, Langton DJ, Sayginer O, Bull SJ |
87 - 92 |
Enhanced corrosion resistance and biocompatibility of beta-type Ti-25Nb-25Zr alloy by electrochemical anodization Huang HH, Wu CP, Sun YS, Huang HM, Lee TH |
93 - 97 |
Anti-fish bacterial pathogen effect of visible light responsive Fe3O4@TiO2 nanoparticles immobilized on glass using TiO2 sol-gel Yeh N, Lee YC, Chang CY, Cheng TC |
98 - 102 |
Biomimetic hydroxyapatite grown on biomedical polymer coated with titanium dioxide interlayer to assist osteocompatible performance Chi MH, Tsou HK, Chung CJ, He JL |
103 - 107 |
Deposition, characterization, and in vivo performance of parylene coating on general-purpose silicone for examining potential biocompatible surface modifications Chou CM, Shiao CJ, Chung CJ, He JL |
108 - 116 |
Cytocompatibility and antibacterial properties of zirconia coatings with different silver contents on titanium Huang HL, Chang YY, Chen YC, Lai CH, Chen MYC |
117 - 122 |
Blood compatibility and adhesion of collagen/heparin multilayers coated on two titanium surfaces by a layer-by-layer technique Chou CC, Zeng HJ, Yeh CH |
123 - 130 |
Insertion torques influenced by bone density and surface roughness of HA-TiO2 coatings Cheng T, Chen Y, Nie X |
131 - 134 |
Surface morphology of TiN-coated nanotubular Ti-25Ta-xZr alloys for dental implants prepared by RF sputtering Kim HJ, Jeong YH, Choe HC, Brantley WA |
135 - 140 |
Hydroxyapatite precipitation on nanotubular films formed on Ti-6Al-4V alloy for biomedical applications Jo CI, Jeong YH, Choe HC, Brantley WA |
141 - 146 |
Formation of titanium dioxide nanotubes on Ti-30Nb-xTa alloys by anodizing Kim ES, Jeong YH, Choe HC, Brantley WA |
147 - 153 |
Surface characteristics of hydroxyapatite-coated layer prepared on nanotubular Ti-35Ta-xHf alloys by EB-PVD Jeong YH, Moon BH, Choe HC, Brantley WA |
154 - 158 |
Hydroxyapatite coating on micropore-formed titanium alloy utilizing electrochemical deposition Lee K, Jeong YH, Ko YM, Choe HC, Brantley WA |
159 - 164 |
The influence of reaction temperatures and volume of oleic acid to synthesis SnS nanocrystals by using thermal decomposition method Liang BYJ, Shen YM, Wang SC, Huang JL |
165 - 171 |
Effect of indium concentration on luminescence and electrical properties of indium doped ZnO nanowires Lim SY, Brahma S, Liu CP, Wang RC, Huang JL |
172 - 176 |
Epitaxial (100)-oriented Mo/V superlattice grown on MgO(100) by dcMS and HiPIMS Shayestehaminzadeh S, Magnusson RL, Gislason HP, Olafsson S |
177 - 183 |
Angle-resolved investigation of ion dynamics in high power impulse magnetron sputtering deposition system Cada M, Adamek P, Stranak V, Kment S, Olejnicek J, Hubicka Z, Hippler R |
184 - 191 |
Deposition of hematite Fe2O3 thin film by DC pulsed magnetron and DC pulsed hollow cathode sputtering system Hubicka Z, Kment S, Olejnicek J, Cada M, Kubart T, Brunclikova M, Ksirova P, Adamek P, Remes Z |
192 - 198 |
Influence of HPPMS pulse length and inert gas mixture on the properties of (Cr,Al)N coatings Bagcivan N, Bobzin K, Grundmeier G, Wiesing M, Ozcan O, Kunze C, Brugnara RH |
199 - 203 |
Ultra-thin poly-crystalline TiN films grown by HiPIMS on MgO(100) -In-situ resistance study of the initial stage of growth Shayestehaminzadeh S, Tryggvason TK, Magnus F, Olafsson S, Gudmundsson JT |
204 - 215 |
Exploring new W-B coating materials for the aqueous corrosion-wear protection of austenitic stainless steel Mallia B, Dearnley PA |
216 - 223 |
Character and chemical-wear response of high alloy austenitic stainless steel (Ortron 90) surface engineered with magnetron sputtered Cr-B-N ternary alloy coatings Mallia B, Stuber M, Dearnley PA |
224 - 231 |
Effects of Si and Y in structural development of (Al,Cr,Si/Y)OxN1 (-) (x) thin films deposited by magnetron sputtering Najafi H, Karimi A, Alexander D, Dessarzin P, Morstein M |
232 - 238 |
Thermal conductivity of hard oxynitride coatings Bottger PHM, Lewin E, Patscheider J, Shklover V, Cahill DG, Ghisleni R, Sobiech M |
239 - 244 |
Non-equibiaxial deformation of W/Cu nanocomposite thin films on stretchable substrate: Effect of loading path Renault PO, Le Bourhis E, Goudeau P, Thiaudiere D, Faurie D |
245 - 250 |
Stress evaluation in thin films: Micro-focus synchrotron X-ray diffraction combined with focused ion beam patterning for d(o) evaluation Baimpas N, Le Bourhis E, Eve S, Thiaudiere D, Hardie C, Korsunsky AM |
251 - 257 |
Mechano-chemical degradation of flexible electrodes for optoelectronic device applications Bejitual TS, Morris NJ, Cronin SD, Cairns DR, Sierros KA |
258 - 262 |
Annealing induced structural evolution and electrochromic properties of nanostructured tungsten oxide films Wu CL, Lin CK, Wang CK, Wang SC, Huang JL |
263 - 267 |
Structural transformation of sputtered o-LiMnO2 thin-film cathodes induced by electrochemical cycling Fischer J, Chang K, Ye J, Ulrich S, Ziebert C, Music D, Hallstedt B, Seifert HJ |
268 - 275 |
Controlled buckling behavior of patterned oxide structures on compliant substrates for flexible optoelectronics Bejitual TS, Morris NJ, Cairns DR, Sierros KA |
276 - 280 |
Effect of substrate bias and hydrogen addition on the residual stress of BCN film with hexagonal structure prepared by sputtering of a B4C target with Ar/N-2 reactive gas Park JK, Lee JH, Lee WS, Baik YJ |
281 - 291 |
Effects of duty cycle and pulse frequency on the fabrication of AlCrN thin films deposited by high power impulse magnetron sputtering Hsiao YC, Lee JW, Yang YC, Lou BS |
292 - 298 |
Shape controllability and photoluminescence properties of ZnO nanorods grown by chemical bath deposition Terasako T, Murakami T, Yagi M, Shirakata S |
299 - 305 |
Lubricating graphene with a nanometer-thick perfluoropolyether Kozbial A, Li ZT, Iasella S, Taylor AT, Morganstein B, Wang YJ, Sun JN, Zhou B, Randall NX, Liu HT, Li L |
306 - 312 |
Optimization and functionalization of anodized titania nanotubes for redox supercapacitor Endut Z, Hamdi M, Basirun WJ |
313 - 320 |
Flow curve determination of thin films by improved finite element models and different nanoindenter geometries Bobzin K, Bagcivan N, Brugnara RH, Perne J |
321 - 329 |
Micro-chemical and -morphological features of heat treated plasma sprayed zirconia-based thermal barrier coatings Cortese B, Caschera D, de Caro T, Ingo GM |
330 - 339 |
Performance characterization of metallic substrates coated by HVOF WC-Co Venter AM, Oladijo OP, Luzin V, Cornish LA, Sacks N |