1495 - 1503 |
Effects of water vapor on oxidation behavior of ferritic stainless steels under solid oxide fuel cell interconnect exposure conditions Yang ZG, Xia GG, Singh P, Stevenson JW |
1505 - 1512 |
Synthesis and characterization of Ce0.8Gd0.2O2-y polycrystalline and thin film materials Chiodelli G, Malavasi L, Massarotti V, Mustarelli P, Quartarone E |
1513 - 1520 |
Fabrication and perfonnance of functionally graded cathodes for IT-SOFCs based on doped ceria electrolytes Xu XY, Xia CR, Mao GL, Peng D |
1521 - 1527 |
Characterization of Nd0.6Sr0.4Co1-yFeyO3-delta (0 <= y <= 0.5) cathode materials for inten-nediate temperature solid oxide fuel cells Lee KT, Manthiram A |
1529 - 1537 |
XPS investigations of TiOySz amorphous thin films used as positive electrode in lithium microbatteries Lindic MH, Martinez H, Benayad A, Pecquenard B, Vinatier P, Levasseur A, Gonbeau D |
1539 - 1547 |
Influence of the synthesis route on the electrochemical propel-ties of LiNi0.425Mn0.425Co0.15O2 Tran N, Croguennec L, Jordy C, Biensan P, Delmas C |
1549 - 1554 |
A soft chemistry synthesis and electrochemical properties of LiV3O8 as cathode material for lithium secondary batteries Liu QY, Liu HW, Zhou XW, Cong CJ, Zhang KL |
1555 - 1561 |
Charge disproportionation in (X0.6Sr0.4)(0.99)Fe0.8Co0.2O3-delta perovskites (X=La, Pr, Sm, Gd) Pedersen T, Saadi S, Nielsen KH, Morup S, Kammer K |
1563 - 1569 |
Effect of A-site stoichiometry on phase stability and electrical conductivity of the perovskite Las(Ni0.59Fe0.41)O3-delta and its compatibility with (La0.85Sr0.15)(0.91)MnO3-delta and Zr0.85Y0.15O2.925 Knudsen J, Friehling PB, Bonanos N |
1571 - 1575 |
The anion disorder in the perovskite fluoride KCaF3 Demetriou DZ, Catlow CRA, Chadwick A, McIntyre GJ, Abrahams I |
1577 - 1583 |
Conductivity and viscosity behaviour of PMMA based gels and nano dispersed gels: Role of dielectric constant of the solvent Singh B, Kumar R, Sekhon SS |
1585 - 1590 |
Ionic conduction in 70 MeV C5+ ion-irradiated P(VDF-HFP)-(PC+DEC)-LiCF3SO3 gel polymer electrolyte system Kumar A, Saikia D, Singh F, Avasthi DK |
1591 - 1599 |
Di-ureasil ormolytes doped with Mg2+ ions. Part 1: Morphological, thermal and electrochemical properties Nunes SC, Bermudez VDZ, Silva MM, Barros S, Smith MJ, Morales E, Carlos LD, Rocha J |
1601 - 1611 |
Di-ureasil ormolytes doped with Mg2+ ions. Part 2. Cationic and anionic environments Nunes SC, Bermudez VZ, Ostrovskii D, Carlos LD |
1613 - 1625 |
Nominal vs. actual stoichiometries in Al-doped NASICONs: A study of the Na1.4Al0.4M1.6(PO4)(3) (M=Ge, Sn, Ti, Hf, Zr) family Maldonado-Manso P, Aranda MAG, Bruque S, Sanz J, Losilla ER |
1627 - 1634 |
Effect of total gas and oxygen partial pressure during deposition on the properties of sputtered V2O5 thin films Gies A, Pecquenard B, Benayad A, Martinez H, Gonbeau D, Fuess H, Levasseur A |
1635 - 1640 |
Nanostructured LiCoO2 and LiMn2O4 fibers fabricated by a high frequency electrospinning Fu ZW, Ma J, Qin QZ |
1641 - 1646 |
Relaxor behaviour of Pb[(Mg3/4Co1/4)(1/3)Nb-2/3]O-3 ceramic Prasad K, Kumar A, Choudhary SN, Choudhary RNP |
1647 - 1652 |
Design and performance of an electrochemical in-situ cell for high resolution full-pattern X-ray powder diffraction Baehtz C, Buhrmester T, Bramnik NN, Nikolowski K, Ehrenberg H |
1653 - 1656 |
Synthesis and conductivity of Yb2Ti2O7 nanoceramics Shlyakhtina AV, Abrantes JCC, Larina LL, Shcherbakova LG |