Process Safety and Environmental Protection

Process Safety and Environmental Protection, Vol.117 Entire volume, number list

ISSN: 0957-5820 (Print)

In this Issue (69 articles)

1 - 10	Multi-hydrolytic biocatalyst from organic solid waste and its application in municipal waste activated sludge pre-treatment towards energy recovery Selvakumar P, Sivashanmugam P
11 - 21	Comparison of different electrode materials and modification for power enhancement in benthic microbial fuel cells (BMFCs) Prakash O, Mungray A, Kailasa SK, Chongdar S, Mungray AK
22 - 32	Post-treatment of anaerobic effluent containing 1,4-dioxane and heavy metals via auto-aerated down-flow hanging luffa (ADHL) system Mahmoud M, Ismail S, Tawfik A
33 - 42	Chick-Watson kinetics of virus inactivation with granular activated carbon modified with silver nanoparticles and/or copper oxide Shimabuku QL, Ueda-Nakamura T, Bergamasco R, Fagundes-Klen MR
43 - 50	Baker's yeast wastewater advanced treatment using ozonation and membrane process for irrigation reuse Balcioglu G, Gonder ZB
51 - 60	Enhanced removal of tetracycline using modified sawdust: Optimization, isotherm, kinetics, and regeneration studies Alidadi H, Dolatabadi M, Davoudi M, Barjasteh-Askari F, Jamali-Behnam F, Hosseinzadeh A
61 - 66	Analysis of a gas explosion in Dimock PA (USA) during fracking operations in the Marcellus gas shale Engelder T, Zevenbergen JF
67 - 81	Optimal selection of an integrated produced water treatment system in the upstream of oil industry Bagheri M, Roshandel R, Shayegan J
82 - 91	Emission reduction research and development of PCDD/Fs in the iron ore sintering Qian LX, Chun TJ, Long HM, Li JX, Di ZX, Meng QM, Wang P
92 - 99	Adaptive neural-fuzzy inference system vs. anaerobic digestion model No.1 for performance prediction of thermophilic anaerobic digestion of palm oil mill effluent Tan HM, Gouwanda D, Poh PE
100 - 110	Investigating the effect of inherent safety principles on system reliability in process design Ade N, Liu GL, Al-Douri AF, El-Halwagi MM, Mannan MS
111 - 124	A novel ANN approach for modeling of alternating pulse current electrocoagulation-flotation (APC-ECF) process: Humic acid removal from aqueous media Hasani G, Daraei H, Shahrnoradi B, Gharibi F, Maleki A, Yetilmersoy K, McKay G
125 - 142	Adsorption characteristics of phosphoric acid induced activation of bio-carbon: Equilibrium, kinetics, thermodynamics and batch adsorber design Basu S, Ghosh G, Saha S
143 - 151	Bioconversion of agro-industrial waste into microbial oils by filamentous fungi Carota E, Crognale S, D'Annibale A, Petruccioli M
152 - 158	Increasing water recovery rate of membrane hybrid process on the petrochemical wastewater treatment Venzke CD, Giacobbo A, Ferreira JZ, Bernardes AM, Rodrigues MAS
159 - 167	Incorporation of functionalized multi-walled carbon nanotubes (MWCNTs) into cellulose acetate butyrate (CAB) polymeric matrix to improve the CO2/N-2 separation Lee RJ, Jawad ZA, Ahmad AL, Chua HB
168 - 179	Evaluating challenges to Industry 4.0 initiatives for supply chain sustainability in emerging economies Luthra S, Mangla SK
180 - 189	Photo-oxidation of pre-treated palm oil mill Effluent using cylindrical column immobilized photoreactor Alhaji MH, Sanaullah K, Salleh SF, Baini R, Lim SF, Rigit ARH, Said KAM, Khan A
190 - 199	Mitigation effects on the explosion safety characteristic data of ethanol/air mixtures in closed vessel Mitu M, Brandes E, Hirsch W
200 - 213	A novel three-dimensional electro-Fenton system and its application for degradation of anti-inflammatory pharmaceuticals: Modeling and degradation pathways Mohammadi H, Bina B, Ebrahimi A
214 - 222	Simultaneous evaluation of safety integrity's performance indicators with a generalized implementation of common cause failures Chebila M
223 - 231	Quantitative study of the factors of LNG liquid foam stability: Operating parameters and collection containers and time Yang J, Li YX, Zhu JL, Han H
232 - 244	Characterization vis-a-vis utilization of blast furnace flue dust in the roast reduction of banded iron ore Rath SS, Rao DS, Tripathy SK, Biswal SK
245 - 253	Thermophilic anaerobic digestion of pre-treated orange peel: Modelling of methane production Martin MA, Fernandez R, Gutierrez MC, Siles JA
254 - 266	Prevention and control of major accidents (MAs) and particularly serious accidents (PSAs) in the industrial domain in China: Current status, recent efforts and future prospects Wang B, Wu C, Huang L, Zhang LB, Kang LG, Gao KX
267 - 277	Modeling and optimization of photocatalytic treatment of landfill leachate using tungsten-doped TiO2 nano-photocatalysts: Application of artificial neural network and genetic algorithm Azadi S, Karimi-Jashni A, Javadpour S
278 - 285	A study of flame acceleration and the possibility of detonation with silane mixtures Thomas GO, Bambrey RJ, Oakley GL
286 - 295	Application of the Homogeneous Surface Diffusion Model for the prediction of the breakthrough in full-scale GAC filters fed on groundwater Piazzoli A, Antonelli M
296 - 306	Characterization of new potassium-based solid sorbents prepared using metal silicates for post-combustion CO2 capture Cho MS, Lee SC, Chae HJ, Kwon YM, Lee JB, Kim JC
307 - 314	Carbamazepine degradation by UV and UV-assisted AOPs: Kinetics, mechanism and toxicity investigations Ali F, Khan JA, Shah NS, Sayed M, Khan HM
315 - 325	Sustained release of pesticide (Cypermethrin) from nanocarriers: An effective technique for environmental and crop protection Patel S, Bajpai J, Saini R, Bajpai AK, Acharya S
326 - 340	Science-based framework for ensuring safe use of hydrogen as an energy carrier and an emission-free transportation fuel Khalil YF
341 - 349	Clean and efficient conversion of renewable levulinic acid to levulinate esters catalyzed by an organic-salt of H4SiW12O40 Luan QJ, Liu LJ, Gong SW, Lu J, Wang X, Lv DM
350 - 362	Adsorption performance of packed bed column for the removal of perchlorate using modified activated carbon Radhika R, Jayalatha T, Krishnan GR, Jacob S, Rajeev R, George BK
363 - 371	Highly active based iron-carbonaceous cathodes for heterogeneous electro-Fenton process: Application to degradation of parabens Rosales E, Buftia G, Pazos M, Lazar G, Sanroman MA
372 - 382	Making the links among environmental protection, process safety, and industry 4.0 Gobbo JA, Busso CM, Gobbo SCO, Carreao H
383 - 389	Adsorptive performance of coal based magnetic activated carbon for perfluorinated compounds from treated landfill leachate effluents Zhang CH, Jiang S, Tang JW, Zhang YZ, Cui YY, Su CL, Qu Y, Wei L, Cao HS, Quan JW
390 - 398	Focusing on the patterns and characteristics of extraordinarily severe gas explosion accidents in Chinese coal mines Zhang JJ, Cliff D, Xu KL, You G
399 - 407	Physicochemical characterization of Enterobacter cloacae C3 lipopeptides and their applications in enhancing diesel oil biodegradation Jemil N, Hmidet N, Ben Ayed H, Nasri M
408 - 425	Sustainable Industry 4.0 framework: A systematic literature review identifying the current trends and future perspectives Kamble SS, Gunasekaran A, Gawankar SA
426 - 438	Evaluation for the thermokinetics of the autocatalytic reaction of cumene hydroperoxide mixed with phenol through isothermal approaches and simulations Cao CR, Liu SH, Das M, Shu CM
439 - 445	Profile of organic carbon and nitrogen removal by a continuous flowing conventional activated sludge reactor with pulse aeration Han BC, Jiang WL, Zhang Y, Wei W, Chen J
446 - 453	Dual use of boron-doped diamond electrode in antibiotics-containing water treatment and process control Vasilie S, Manea F, Baciu A, Pop A
454 - 472	Development of inherent safety benefits index to analyse the impact of inherent safety implementation Abidin MZ, Rusli R, Khan F, Shariff AM
473 - 482	Toxicities, kinetics and degradation pathways investigation of ciprofloxacin degradation using iron-mediated H2O2 based advanced oxidation processes Shah NS, Rizwan AD, Khan JA, Sayed M, Khan ZUH, Murtaza B, Lqbal J, Din SU, Imran M, Nadeem M, Al-Muhtaseb AH, Muhammad N, Khan HM, Ghauri M, Zaman G
483 - 497	Comprehensive risk assessment of deepwater drilling riser using fuzzy Petri net model Chang YJ, Wu XF, Chen GM, Ye JH, Chen B, Xu LB, Zhou JL, Yin ZM, Ren KR
498 - 510	Location of contaminant emission source in atmosphere based on optimal correlated matching of concentration distribution Ma DL, Tan W, Wang QS, Zhang ZX, Gao JM, Wang XQ, Xia FS
511 - 522	An amino-functionalized ramie stalk-based adsorbent for highly effective Cu2+ removal from water: Adsorption performance and mechanism Wang F, Yu JX, Zhang ZY, Xu YL, Chi RA
523 - 532	Hybrid forward osmosis-reverse osmosis for wastewater reuse and seawater desalination: Understanding the optimal feed solution to minimise fouling Volpin F, Fons E, Chekli L, Kim JE, Jang A, Shon HK
533 - 538	Industrial non-routine operation process risk assessment using job safety analysis (JSA) and a revised Petri net Li WJ, Cao QG, He M, Sun YB
539 - 550	Use of group contribution method and intelligent algorithms to predict the flash temperature of binary mixtures Banihashemi M, Movagharnejad K
551 - 564	On the mechanism of pressure rise in vented explosions: A numerical study Li RPY, Malalasekera W, Ibrahim S, Liu B
565 - 572	Improving the permeability of coal seam with pulsating hydraulic fracturing technique: A case study in Changping coal mine, China Ni GH, Xie HC, Li Z, Zhuansun LX, Niu YY
573 - 581	Investigation of the effect of low-temperature oxidation on extraction efficiency and capacity of coalbed methane Tang ZQ, Yang SQ, Xu G, Sharifzadeh M, Zhai C
582 - 592	Study on the influence factors of the initial expansion energy of released gas Liang YP, Wang FK, Li XL, Jiang CL, Li L, Chen YL
593 - 605	Electric utility 4.0: Trends and challenges towards process safety and environmental protection Liboni LB, Liboni LHB, Cezarino LO
606 - 615	Strategies to re-establish stable granulation after filamentous outgrowth: Insights from lab-scale experiments Moura LL, Duarte KLS, Santiago EP, Mahler CF, Bassin JP
616 - 628	A method for facility layout optimisation including stochastic risk assessment Ahumada CB, Quddus N, Mannan MS
629 - 638	Large Laboratory-Plant application for the treatment of a Tannery wastewater by Fenton oxidation: Fe(II) and nZVI catalysts comparison and kinetic modelling Vilardi G, Rodriguez-Rodriguez J, Ochando-Pulido JM, Verdone N, Martinez-Ferez A, Di Palma L
639 - 650	Security assessment of process facilities - Intrusion modeling Song GZ, Khan F, Yang M
651 - 659	Hydrocyclone breakage of activated sludge to exploit internal carbon sources and simultaneously enhance microbial activity Xu YX, Wang HL, Wang ZH, Fang YY, Liu Y, Zeng T, Liu ZB, Liu M
660 - 674	Bayesian network-based risk analysis methodology: A case of atmospheric and vacuum distillation unit Zhang JY, Cai BP, Mulenga K, Liu YL, Xie M
675 - 683	On-farm trials of practical options for hydrogen sulphide removal from piggery biogas Skerman AG, Heubeck S, Batstone DJ, Tait S
684 - 693	Potential solidification/stabilization of clay-waste using green geopolymer remediation technologies Dassekpo JBM, Ning JQ, Zha XX
694 - 703	A probabilistic analysis model of oil pipeline accidents based on an integrated Event-Evolution-Bayesian (EEB) model Zhang C, Wu JS, Hu XF, Ni SJ
704 - 710	Removal of fluoride and aluminium using plant-based coagulants wrapped with fibrous thin film Lim WLK, Chung ECY, Chong CH, Ong NTK, Hew WS, Kahar NB, Goh ZJ
711 - 721	Synthesis of magnetic mesoporous nanocrystalline KOH/ZSM-5-Fe3O4 for biodiesel production: Process optimization and kinetics study Rezayan A, Taghizadeh M
722 - 729	Sol-gel Zn, Fe modified SnO2 powders for CO sensors and magnetic applications Dascalu I, Somacescu S, Hornoiu C, Calderon-Moreno JM, Stanica N, Stroescu H, Anastasescu M, Gartner M
730 - 741	Assessing challenges for implementing Industry 4.0: Implications for process safety and environmental protection Moktadir MA, Ali SM, Kusi-Sarpong S, Shaikh MAA