| 2461 - 2463 |
Baotong Huang - Obituaries
Chen WQ, Zhang XQ, Ma JJ, Tang T, Li L, Liu SS |
| 2464 - 2469 |
Confined intra-molecular clustering in orientated polyethylene after annealing
Men YF, Rieger J, Lindner P, Enderle HF, Lilge D, Kristen MO, Mihan S, Jiang SC |
| 2470 - 2474 |
Soluble neodymium chloride 2-ethylhexanol complex as a highly active catalyst for controlled isoprene polymerization
Ren CY, Li GL, Dong WM, Jiang LS, Zhang XQ, Wang FS |
| 2475 - 2480 |
Polymerization of 1,3-butadiene with VO(P-204)(2) and VO(P-507)(2) activated by alkylaluminum
Cao LH, Dong WM, Jiang LS, Zhang XQ |
| 2481 - 2488 |
Effect of swelling response of the support particles on ethylene polymerization
Shi LY, Qin YX, Cheng WX, Chen H, Tang T |
| 2489 - 2495 |
Synthesis of symmetric H-shaped block copolymer by the combination of ATRP and living anionic polymerization
Yu XF, Zhang G, Shi TF, Han YC, An LJ |
| 2496 - 2502 |
Synthesis of novel functional polyolefin containing carboxylic acid via Friedel-Crafts acylation reaction
Zheng Y, Li YG, Pan L, Li YS |
| 2503 - 2507 |
Rod-like crystal growth of dioctyl substituted polyfluorene from nematic and isotropic states
Zhou JJ, Li J, Fu YQ, Bo ZS, Li L, Chan CM |
| 2508 - 2519 |
Morphology evolutions of organically modified montmorillonite/polyamide 12 nanocomposites
Meng XY, Wang Z, Zhao ZF, Du XH, Bi WG, Tang T |
| 2520 - 2525 |
Preparation and mechanical characterization of artificial hollow tubes
Mueller R, Daehne L, Fery A |
| 2526 - 2530 |
Heterogeneity of a vulcanized rubber by the formation of ZnS clusters
Dohi H, Horiuchi S |
| 2531 - 2536 |
A new strain path to inducing phase transitions in semi-crystalline polymers
Brown EN, Dattelbaum DM, Brown DW, Rae PJ, Clausen B |
| 2537 - 2541 |
Flame retardant synergism of rubber and Mg(OH)(2) in EVA composites
Gui H, Zhang XH, Dong WF, Wang QG, Gao JM, Song ZH, Lai JM, Liu YQ, Fan H, Qiao JL |
| 2542 - 2547 |
The role of methyl methacrylate on branching and gel formation in the emulsion copolymerization of BA/MMA
Gonzalez I, Asua JA, Leiza JR |
| 2548 - 2553 |
Synthesis and properties of polymer brush consisting of poly(phenylacetylene) main chain and poly(dimethylsiloxane) side chains
Zhang W, Shiotsuki M, Masuda T |
| 2554 - 2563 |
Polymer encapsulation of surface-modified carbon blacks using surfactant-free emulsion polymerisation
Casado RA, Lovell PA, Navabpour P, Stanford JL |
| 2564 - 2571 |
Nitroxide-mediated polymerization to form symmetrical ABA triblock copolymers from a bidirectional alkoxyamine initiator
Ruehl J, Nilsen A, Born S, Thoniyot P, Xu LP, Chen SW, Braslau R |
| 2572 - 2584 |
Synthesis of stretchable polyetherimides containing multiple alkyl side chains
Wang DH, Shen ZH, Cheng SZD, Harris FW |
| 2585 - 2594 |
Synthesis, characterization, and controllable drug release of dendritic star-block copolymer by ring-opening polymerization and atom transfer radical polymerization
Yuan WZ, Yuan JY, Zheng SX, Hong XY |
| 2595 - 2604 |
Synthesis of polymeric prodrugs of chlorphenesin with saccharide branches by chemo-enzymatic regioselective strategy
Quan J, Wu Q, Lin XF |
| 2605 - 2612 |
Synthesis and characterization of amphiphilic block copolymers from poly(ethylene glycol)methyl ether and 4-methyl-epsilon-caprolactone or 4-phenyl-epsilon-caprolactone
Lee RS, Hung CB |
| 2613 - 2618 |
Polylactide compositions. Part 1: Effect of filler content and size on mechanical properties of PLA/calcium sulfate composites
Murariu M, Ferreira AD, Degee P, Alexandre M, Dubois P |
| 2619 - 2635 |
Experimental analysis and simulation of the gas transport in dense Hyflon (R) AD60X membranes: Influence of residual solvent
Macchione M, Jansen JC, Luca G, Tocci E, Longeri M, Drioli E |
| 2636 - 2643 |
Application of thermo-responsive poly(methyl vinyl ether) containing copolymers in combination with ultrasonic treatment for pigment surface modification in pigment dispersions
Bulychev N, Confortini O, Kopold P, Dirnberger K, Schauer T, Prez FE, Zubov V, Eisenbach CD |
| 2644 - 2648 |
The inhibition effect of 20(S)-Protopanaxadiol (PPD) and Ginsenoside Rh2 for CYP2C9 and CYP3A4
Yao Y, Han WW, Zhou YH, Li ZS, Li Q, Li XY, Chen XY, Zhong DF |
| 2649 - 2658 |
Impacts of stereoregularity and stereocomplex formation on physicochemical, protein adsorption and cell adhesion behaviors of star-shaped 8-arms poly(ethylene glycol)-poly(lactide) block copolymer films
Nagahama K, Nishimura Y, Ohya Y, Ouchi T |
| 2659 - 2664 |
Layer-by-Layer assembly of two polyacrylate derivatives: Effect of solvent composition and side-chain structure
Chen QX, Ma N, Qian HJ, Wang LY, Lu ZY |
| 2665 - 2671 |
Investigation of swelling and controlled-release behaviors of hydrophobically modified poly(methacrylic acid) hydrogels
Liu YY, Liu WQ, Chen WX, Sun L, Zhang GB |
| 2672 - 2680 |
Formation and stability of beta-structure in biodegradable ultra-high-molecular-weight poly(3-hydroxybutyrate) by infrared, Raman, and quantum chemical calculation studies
Murakami R, Sato H, Dybal J, Iwata T, Ozaki Y |
| 2681 - 2691 |
Microstructure of Triton X-100/poly (ethylene glycol) complex investigated by fluorescence resonance energy transfer
Ge LL, Zhang XH, Guo R |
| 2692 - 2699 |
Positron annihilation lifetime spectroscopy of molecularly imprinted hydroxyelthyl methacrylate based polymers
Djourelov N, Ates Z, Guven O, Misheva M, Suzuki T |
| 2700 - 2719 |
Toughening of immiscible PPE/SAN blends by triblock terpolymers
Ruckdaschel H, Sandler JKW, Altstadt V, Schmalz H, Abetz V, Muller AHE |
| 2720 - 2728 |
Bis-GMA/TEGDMA dental composites reinforced with electrospun nylon 6 nanocomposite nanofibers containing highly aligned fibrillar silicate single crystals
Tian M, Gao Y, Liu Y, Liao YL, Xu RW, Hedin NE, Fong H |
| 2729 - 2736 |
Preparation of poly(ethylene terephthalate) nonwoven fabric from endless microfibers obtained by CO2 laser-thinning method
Suzuki A, Kishi M |
| 2737 - 2744 |
Dielectric dispersion study of coexisting phases of aqueous polymeric solution: Poly(vinyl alcohol) plus poly(vinyl pyrrolidone) two-phase systems
Sengwa RJ, Sankha S |
| 2745 - 2754 |
Effect of hydrogen bonding on the crystallization behavior of poly 3-hydroxybutyrate-co-3-hydroxyhexanoate)/silica hybrid composites
Lim JS, Noda I, Im SS |
| 2755 - 2761 |
Effects of micelle structures formed in selective solvents on crystallization behaviors of poly(ethylene glycol)-b-poly(styrene) copolymers
Chen YF, Zhang FB, Xie XM, Yuan JY |
| 2762 - 2767 |
Order-disorder transition in eicosylated polyethyleneimine comblike polymers
Shi HF, Zhao Y, Jiang SC, Xin JH, Rottstegge J, Xu DF, Wang DJ |
| 2768 - 2777 |
Mechanical properties, morphologies, and crystallization behavior of plasticized poly(L-lactide)/poly(butylene succinate-co-L-lactate) blends
Shibata M, Teramoto N, Inoue Y |
| 2778 - 2790 |
Morphology evolution during injection molding: Effect of packing pressure
Pantani R, Coccorullo I, Speranza V, Titomanlio G |
| 2791 - 2791 |
Electrochemical polymerization of pyrrole in supercritical carbon dioxide-in-water emulsion (vol 47, pg 1547, 2006)
Jikei M, Saitoh S, Yasuda H, Itoh H, Masato S, Kakimoto MA, Yoshida H |
