479 - 484 |
Structural defects in AFe(2)O(4) (A = Zn, Mg) spinels Gaudon M, Pailhe N, Wattiaux A, Demourgues A |
485 - 491 |
Adsorption of mercury cation on chemically modified clay Guerra DL, Viana RR, Airoldi C |
492 - 498 |
Synthesis, structure, and electrochemical characteristics of LiNi1/3Co1/3Mn1/3O2 prepared by thermal polymerization Ding CX, Meng QS, Wang L, Chen CH |
499 - 504 |
Dependence of the SHS reaction behavior and product on B4C particle size in Al-Ti-B4C and Al-TiO2-B4C systems Zou BL, Shen P, Jiang QC |
505 - 508 |
Preparation of hexagonal WO3 from hexagonal ammonium tungsten bronze for sensing NH3 Szilagyi IM, Wang LS, Gouma PI, Balaszsi C, Madarasz J, Pokol G |
509 - 514 |
Microemulsion-mediated solvothermal synthesis of tin(IV) hydrogen phosphate rose-like three-dimensional nanostructures and their electrochemical properties Yang H, He XY, Cao MH |
515 - 521 |
Sol-gel reaction stability studied: Influence in the formation temperature and properties of ferroelectric thin films Perez J, Vilarinho PM, Kholkin AL, Almeida A |
522 - 530 |
Synthesis and characterization of Sr(10-x)Cdx(PO4)(6)Y-2 (Y = OH and F): A comparison of apatites containing two divalent cations Badraoui B, Aissa A, Bigi A, Debbabi M, Gazzano M |
531 - 537 |
The mechanism of accelerated phase formation of MgB2 by Cu-doping during low-temperature sintering Ma ZQ, Liu YC, Shi QZ, Zhao Q, Gao ZM |
538 - 542 |
Phase structure, morphology, and Raman characteristics of NaNbO3 particles synthesized by different methods Chang YF, Yang ZP, Dong MY, Liu ZH, Wang ZL |
543 - 548 |
Effects of solvents and salt on the thermal stability of charged LiCoO2 Wang QS, Sun JH, Chen XF, Chu GQ, Chen CH |
549 - 554 |
Synthesis and characterization of a new 2,4,6-triaminopyridinium dihydrogendiphosphate dihydrate (C4H8N5)(2)H2P2O7 center dot 2H(2)O Guelmami L, Gharbi A, Jouini A |
555 - 559 |
Spark plasma sintering of BiFeO3 Mazumder R, Chakravarty D, Bhattacharya D, Sen A |
560 - 565 |
Crystal structure, thermal analysis and IR spectrometric investigation of bis(o-anisidinium) sulfate (C7H10NO)(2)SO4 Chtioui A, BenHamada L, Jouini A |
566 - 570 |
Influence of Bi2O3 and CuO addition on low-temperature sintering and dielectric properties of Ba0.6Sr0.4TiO3 ceramics Jiang HT, Zhai JW, Chou XJ, Yao X |
571 - 575 |
Optical properties of Ho3+: SrMoO4 single crystal Ma XH, Zhu ZJ, Li JF, You ZY, Wang Y, Tu CY |
576 - 580 |
Itinerant ferromagnetism to insulating spin glass in SrRu1-xCuxO3 (0 <= x <= 0.3) Mangalam RVK, Sundaresan A |
581 - 588 |
Growth of nano-particles of Al2O3, AlN and iron oxide with different crystalline phases in a thermal plasma reactor Kulkarni NV, Karmakar S, Banerjee I, Sahasrabudhe SN, Das AK, Bhoraskar SV |
589 - 593 |
Fabrication of lithium-doped zinc oxide film by anodic oxidation and its ferroelectric behavior Yu LG, Zhang GM, Zhao XY, Guo DZ |
594 - 599 |
Growth of colorless transparent GaN single crystals on prismatic GaN seeds using a Ga melt and Na vapor Yamada T, Yamane H, Yao YZ, Yokoyama M, Sekiguchi T |
600 - 605 |
Photoluminescence characteristics of ZnO clusters confined in the micropores of zeolite L Wang F, Song HW, Pan GH, Fan LB, Dai QL, Dong BA, Liu HH, Yu JH, Wang X, Li L |
606 - 612 |
pH-Controlled drug release from mesoporous silica tablets coated with hydroxypropyl methylcellulose phthalate Xu WJ, Gao Q, Xu Y, Wu D, Sun YH |
613 - 618 |
Synthesis of nanocrystalline magnesium aluminate (MgAl2O4) spinel powder by the urea-formaldehyde polymer gel combustion route Prabhakaran K, Patil DS, Dayal R, Gokhale NM, Sharma SC |
619 - 622 |
Synthesis and microwave dielectric properties of CaO-MgO-SiO2 submicron powders doped with Li2O-Bi2O3 by sol-gel method Wang HP, Xu SQ, Zhang B, Zhang QL, Yang H |
623 - 628 |
Ionic-liquid-assisted synthesis of YF3 with different crystalline phases and morphologies Zhong HX, Hong JM, Cao XF, Chen XT, Xue ZL |
629 - 632 |
alpha-MoO3 nanocrystals of controlled size on a glass substrate Wu MC, Lee CS |
633 - 637 |
The effect of calcining temperature on the magnetic properties of the ultra-fine NiCuZn-ferrites Kim JS, Ham CW |
638 - 643 |
Effect of ZnO addition on the sintering and electrical properties of (Mn,W)-doped PZT-PMS-PZN ceramics Li H, Yang ZP, Wei LL, Chang YF |
644 - 648 |
Structure characterization and oxidation mechanism study of porous biomorphic carbon template derived from basswood Gao PZ, Wu MJ, Li BJ, Liu YL |
649 - 653 |
Phase formation mechanism and kinetics in solid-state synthesis of undoped and calcium-doped lanthanum manganite Shu QF, Zhang JY, Yan BJ, Liu JH |
654 - 659 |
Phase formation of V2O5 center dot xNb(2)O(5) compounds via gels and freeze-dried precursors Langbein H, Mayer-Uhma T |
660 - 665 |
Thermal decomposition of grinding activated bayerite Du XL, Su XH, Wang YQ, Li JG |
666 - 673 |
Ti-Ca-Al-doped YCrO3 pigments: XRD and UV-vis investigation Ardit M, Dondi M, Cruciani G, Matteucci F |
674 - 677 |
Study on properties of BaxSmyTi7O20 ceramics with CaO-SiO2-B2O3 glass Zhu HK, Zhou HQ, Liu M |
678 - 681 |
Selective intercalation of o-phenylene diamine into molybdenum oxide layers Shao K, Cao HQ, Qiu Q |
682 - 687 |
A facile synthesis of ordered ultralong silver nanobelts Liu BQ, Luo W, Zhao XP |
688 - 692 |
Syntheses and structures of Ta-2(WO2)(0.87)H-0.26(PO4)(4) and Ta-2(MoO2)(PO4)(4) Rungrochaipon P, Wang XQ, Jacobson AJ |
693 - 699 |
Structural and spectroscopic studies of mechanochemically activated nanosized apatite from Syria Yaneva V, Petrov O, Petkova V |
700 - 706 |
Fabrication and efficient photocatalytic degradation of methylene blue over CuO/BiVO4 composite under visible-light irradiation Jiang HQ, Endo H, Natori H, Nagai M, Kobayashi K |
707 - 713 |
Synthesis of spherical nanostructured LiMxMn2-xO4 (M = Ni2+, Co3+, and Ti4+; 0 <= x <= 0.2) via a single-step ultrasonic spray pyrolysis method and their high rate charge-discharge performances Zhang LQ, Yabu T, Taniguchi I |
714 - 717 |
Dendrigraft polymer-based synthesis of silver nanoparticles showing bright blue fluorescence Manoth M, Manzoor K, Patra MK, Pandey P, Vadera SR, Kumar N |