| L49 - L52 |
Synthesis of LiMnO2 with alpha-NaMnO2-type structure by a mixed-alkaline hydrothermal reaction
Tabuchi M, Ado K, Kobayashi H, Kageyama H, Masquelier C, Kondo A, Kanno R |
| L53 - L55 |
Low temperature synthesis and electrode properties of Li4Mn5O12
Kim J, Manthiram A |
| L55 - L58 |
Characterization of 3 x 3 matrix arrays of solution-phase electrochromic cells
Leventis N, Chen MG, Liapis AI, Johnson JW, Jain A |
| L58 - L60 |
Surface roughness of reactive ion etched 4H-SiC in SF6/O-2 and CHF3/H-2/O-2 plasmas
Casady JB, Mani SS, Siergiej RR, Urban W, Balakrishna V, Sanger PA, Brandt CD |
| L60 - L61 |
Cu dissolution from Si(111) into an SC-1 process solution
Chopra D, Suni II, Busnaina AA |
| L61 - L63 |
Improved porous mixture of molybdenum nitride and tantalum oxide as a charge storage material
Deng CZ, Pynenburg RAJ, Tsai KC |
| L64 - L66 |
Scanning electrochemical microscopy with simultaneous independent topography
James PI, Garfias-Mesias LF, Moyer PJ, Smyrl WH |
| L67 - L70 |
Fluorocarbon polymer deposited by inductively coupled plasma oxide etching
Hara T, Sato M, Sakiyama K |
| L70 - L72 |
High anodic stability of a new electrolyte solvent : Unsymmetric noncyclic aliphatic sulfone
Xu K, Angell CA |
| 1081 - 1087 |
In situ investigation of the electrochemical reduction of carbonate electrolyte solutions at graphite electrodes
Imhof R, Novak P |
| 1088 - 1092 |
Current efficiency of an ion-selective membrane : Effect of fixed charge distribution
Hsu JP, Ting KC |
| 1093 - 1100 |
Some aspects of the atmospheric corrosion of copper in the presence of sodium chloride
Strandberg H, Johansson LG |
| 1101 - 1108 |
Perforated covers for propagating pits
Laycock NJ, White SP, Noh JS, Wilson PT, Newman RC |
| 1108 - 1112 |
Glycosyl halides as building blocks for the electrosynthesis of glycosides
Rondinini S, Mussini PR, Sello G, Vismara E |
| 1113 - 1121 |
Characterization of layered lithium nickel manganese oxides synthesized by a novel oxidative coprecipitation method and their electrochemical performance as lithium insertion electrode materials
Spahr ME, Novak P, Schnyder B, Haas O, Nesper R |
| 1121 - 1125 |
In situ X-ray absorption spectroscopic study of electrodeposited nickel oxide films during redox reactions
Mansour AN, Melendres CA, Wong J |
| 1126 - 1130 |
Electrochemical formation of polypyrrole/SiO2 composite film and its application to organic electroluminescence devices
Komaba S, Fujihana K, Osaka T, Aiki S, Nakamura S |
| 1131 - 1136 |
Preparation and electrochemical characterization of overlithiated spinel LiMn2O4
Peramunage D, Abraham KM |
| 1137 - 1141 |
Analyses of self-humidification and suppression of gas crossover in Pt-dispersed polymer electrolyte membranes for fuel cells
Watanabe M, Uchida H, Emori M |
| 1142 - 1148 |
Evolution and entry of hydrogen into iron during cathodic charging in alkaline solution with ethylenediaminetetraacetic acid
Zakroczymski T, Kleshnya V, Flis J |
| 1149 - 1159 |
An along-the-channel model for proton exchange membrane fuel cells
Yi JS, Nguyen TV |
| 1160 - 1164 |
Effect of anode materials on NF3 formation
Tasaka A, Kawagoe T, Takuwa A, Yamanaka M, Tojo T, Aritsuka M |
| 1165 - 1173 |
p(O-2)-dependent nonohmic current-voltage characteristics and current-induced redox behavior of junctioned SrTiO3
Ohtaki M, Ozaki M, Eguchi K |
| 1174 - 1178 |
In situ ellipsometric study of the electroprecipitation of nickel hydroxide films
Kong FP, Kostecki R, McLarnon F |
| 1179 - 1183 |
Lithium-7 nuclear magnetic resonance investigation of lithium insertion in hard carbon
Dai Y, Wang Y, Eshkenazi V, Peled E, Greenbaum SG |
| 1184 - 1192 |
Geometric requirements of solid electrolyte cells with a reference electrode
Winkler J, Hendriksen PV, Bonanos N, Mogensen M |
| 1193 - 1196 |
Properties of polyphenylquinoxaline acid complex as an electrode material
Song EH, Paik WK |
| 1196 - 1201 |
Electrochemistry of thallium in the basic aluminum chloride-1-methyl-3-ethylimidazolium chloride room temperature molten salt
Jeng EGS, Sun IW |
| 1202 - 1206 |
Electrochemical promotion of ethylene oxidation on Pt catalyst films deposited on CeO2
Petrolekas PD, Balomenou S, Vayenas CG |
| 1207 - 1211 |
Preparation and characterization of poly(vinyl chloride-co-vinyl acetate)-based gel electrolytes for Li-ion batteries
Sung HY, Wang YY, Wan CC |
| 1211 - 1218 |
Electrochemistry of TiN in 6 M KOH solution
Windisch CF, Virden JW, Elder SH, Liu J, Engelhard MH |
| 1218 - 1226 |
In situ studies of Cu deposition in the presence of quaternary ammonium salts
Eliadis ED, Alkire RC |
| 1227 - 1232 |
Direct electrochemical detection of C-60 in solution by steady-state voltammetry at microelectrodes
Muller R, Heinze J |
| 1232 - 1238 |
Hole injection at the silicon aqueous electrolyte interface : A possible mechanism for chemiluminescence from porous silicon
Kooij ES, Butter K, Kelly JJ |
| 1238 - 1244 |
LiMn2-xCuxO4 spinels (0.1 <= x <= 0.5) : A new class of 5 V cathode materials for Li batteries - I. Electrochemical, structural, and spectroscopic studies
Ein-Eli Y, Howard WF, Lu SH, Mukerjee S, McBreen J, Vaughey JT, Thackeray MM |
| 1245 - 1252 |
A study of the adhesion of electrophoretically deposited phosphors
Russ BE, Talbot JB |
| 1253 - 1256 |
An analysis of the binder formation in electrophoretic deposition
Russ BE, Talbot JB |
| 1257 - 1262 |
Reactive ion etching of silicon containing polynorbornenes
Zhao Q, Kohl PA |
| 1263 - 1272 |
Optimum conditions for composites fiber coating by chemical vapor infiltration
Griffiths SK, Nilson RH |
| 1273 - 1276 |
Ultrasmooth V-grooves in InP by two-step wet chemical etching
Bonsch P, Wullner D, Schrimpf T, Schlachetzki A, Lacmann R |
| 1277 - 1284 |
A kinetic study of the chemical vapor deposition of silicon carbide from dichlorodimethylsilane precursors
Takeuchi T, Egashira Y, Osawa T, Komiyama H |
| 1285 - 1291 |
Influence of overpolish time on the performance of W Damascene technology
van Kranenburg H, Woerlee PH |
| 1292 - 1296 |
The search for cathode and anode traps in high-voltage stressed silicon oxides
Chen L, Kang CS, Oralkan O, Dumin DJ, Brown GA, Bellutti P |
| 1297 - 1303 |
Surface state generation of Mo gate metal oxide semiconductor devices caused by Mo penetration into gate oxide
Amazawa T, Oikawa H |
| 1303 - 1305 |
Thin films of amorphous germanium-tin alloys prepared by radio-frequency magnetron sputtering
Maruyama T, Akagi H |
| 1306 - 1309 |
Effects of annealing on oxygen depth profiles and chemical etching rates of thermally grown silicon oxides
Watanabe Y |
| 1310 - 1317 |
Thermodynamic study, composition, and microstructure of low-pressure chemical vapor deposited silicon dioxide films grown from TEOS/N2O mixtures
Davazoglou D, Vamvakas VE, Vahlas C |
| 1318 - 1330 |
The kinetics of the low-pressure chemical vapor deposition of polycrystalline silicon from silane
Weerts WLM, de Croon MHJM, Marin GB |
| 1330 - 1334 |
Temperature dependence of the electrical properties of SrBi2Ta2O9 thin films deposited by radio-frequency magnetron sputtering
Yang CH, Park SS, Yoon SG |
| 1335 - 1338 |
New concept of contrast enhancement of resist and its application to positive-type resist
Yoshida Y, Kubota S, Ishibashi K, Ohnishi S, Kusumoto N |
| 1338 - 1343 |
Analysis of the superior water blocking ability of electron cyclotron resonance-plasma SiO2 film
Okuda S, Shioya Y, Kashimada H |
| 1344 - 1346 |
A novel method of CO2 capture from high temperature gases
Nakagawa K, Ohashi T |
| 1346 - 1350 |
Low pressure chemically vapor deposited WO3 thin films for integrated gas sensor applications
Davazoglou D, Georgouleas K |
| 1351 - 1355 |
Impact of floating gate dopant concentration and interpoly dielectric processing on tunnel dielectric reliability
Heinisch HH, Hornung BE, Linkous RB, Craig SA, Mirabedini MR, Wortman JJ |
| 1355 - 1360 |
Oxidation studies of silicon oxynitride ceramics
Manessis D, Du HH, Larker R |
| 1360 - 1362 |
Low temperature silicon wafer-to-wafer bonding with nickel silicide
Xiao ZX, Wu GY, Zhang GB, Li ZH, Hao YL, Chen WR, Wang YY |
| 1363 - 1373 |
Ceramic microstructure and oxygen permeability of SrCo(Fe,M)O3-delta (M = Cu or Cr) perovskite membranes
Kharton VV, Tikhonovich VN, Li SB, Naumovich EN, Kovalevsky AV, Viskup AP, Bashmakov IA, Yaremchenko AA |
| 1374 - 1381 |
Thermal expansion of nickel-zirconia anodes in solid oxide fuel cells during fabrication and operation
Mori M, Yamamoto T, Itoh H, Inaba H, Tagawa H |
| 1381 - 1384 |
Hydrophobicity of a hydrochloric-treated GaAs surface analyzed by contact angle measurement
Matsushita K, Suzuki N, Okuyama S, Okuyama K |
| 1384 - 1389 |
The thermal stability of CoSi2 on polycrystalline silicon : The effect of silicon grain size and metal thickness
Gambino JP, Colgan EG, Domenicucci AG, Cunningham B |
| 1390 - 1400 |
Mathematical modeling of oxygen exchange and transport in air-perovskite-yttria-stabilized zirconia interface regions - II. Direct exchange of oxygen vacancies
Svensson AM, Sunde S, Nisancioglu K |
| 1400 - 1405 |
Gettering of iron to implantation induced cavities and oxygen precipitates in silicon
McHugo SA, Weber ER, Myers SM, Petersen GA |
| 1406 - 1413 |
Thermodynamic behavior of various phases appearing in the CeZrO4-CeZrO3.5 system and the formation of metastable solid solutions
Otsuka-Yao-Matsuo S, Izu N, Omata T, Ikeda K |
| 1413 - 1413 |
Differential scanning calorimetry study of the reactivity of carbon anodes in plastic Li-ion batteries (vol 145, pg 473, 1998)
Du Pasquier A, Disma F, Bowmer T, Gozdz AS, Amatucci G, Tarascon JM |
