265 - 266 |
A message from the special issue editor Berg DE |
267 - 267 |
Unsteady aerodynamics experiment Fingersh LJ |
268 - 268 |
Improved blade designs and manufacturing processes reduce the cost of wind energy O'Dell K |
269 - 269 |
NREL's dynamometer helps industry engineers test full-scale wind turbines O'Dell K |
270 - 270 |
Application of acoustic emission nondestructive testing during wind turbine blade tests Rumsey MA, Musial W |
271 - 271 |
Application of infrared thermography nondestructive testing during wind turbine blade tests Rumsey MA, Musial W |
272 - 281 |
Blade dynamic stall vortex kinematics for a horizontal axis wind turbine in yawed conditions Schreck SJ, Robinson MC, Hand MM, Simms DA |
282 - 289 |
Active load control for airfoils using microtabs Nakafuji DTY, van Dam CP, Smith RL, Collins SD |
290 - 295 |
Skewed wake induction effects on thrust distribution on small wind turbine rotors Chaney K, Eggers AJ, Moriarty PJ, Holley WE |
296 - 303 |
Site-specific design optimization of 1.5-2.0 MW wind turbines Fuglsang P, Thomsen K |
304 - 309 |
Potentials for site-specific design of MW sized wind turbines Thomsen K, Fuglsang P, Schepers G |
310 - 318 |
Scaling of composite wind turbine blades for rotors of 80 to 120 meter diameter Griffin DA, Zuteck MD |
319 - 326 |
Full-state feedback control of a variable-speed wind turbine: A comparison of periodic and constant gains Stol K, Balas M |
327 - 332 |
Comparative analysis of regression and artificial neural network models for wind turbine power curve estimation Li SH, Wunsch DC, O'Hair E, Giesselmann MG |
333 - 338 |
Automatic system for wind turbine testing Camporeale SM, Fortunato B, Marilli G |
339 - 345 |
Scale and lag effects on control of aerodynamic power and loads on a HAWT rotor Moriarty PJ, Eggers AJ, Chaney K, Holley WE |
346 - 355 |
Parametric models for estimating wind turbine fatigue loads for design Manuel L, Veers PS, Winterstein SR |
356 - 363 |
Extreme gust loading for wind turbines during operation Cheng PW, Bierbooms WAAM |
364 - 371 |
Predicting design wind turbine loads from limited data: Comparing random process and random peak models Fitzwater LM, Winterstein SR |
372 - 381 |
Computerized method for preliminary structural design of composite wind turbine blades Bir GS |
382 - 386 |
The optimization of blade pitch settings of an air turbine using self-pitch-controlled blades for wave power conversion Kim TH, Setoguchi T, Kaneko K, Takao M |
387 - 389 |
Energy storage technologies for utility scale intermittent renewable energy systems Cavallo AJ |