| 2945 - 2961 |
Carbon materials in composite bipolar plates for polymer electrolyte membrane fuel cells: A review of the main challenges to improve electrical performance
Antunes RA, de Oliveira MCL, Ett G, Ett V |
| 2962 - 2970 |
Structure and performance of LiFePO4 cathode materials: A review
Zhang WJ |
| 2971 - 2978 |
Low-temperature sintering and electrical properties of strontium- and magnesium-doped lanthanum gallate with V2O5 additive
Ha SB, Cho YH, Ji HI, Lee JH, Kang YC, Lee JH |
| 2979 - 2986 |
Methanol electrooxidation at mesoporous Pt and Pt-Ru electrodes: A comparative study with carbon supported materials
Garcia G, Florez-Montano J, Hernandez-Creus A, Pastor E, Planes GA |
| 2987 - 2993 |
The sol-gel route: A versatile process for up-scaling the fabrication of gas-tight thin electrolyte layers
Viazzi C, Rouessac V, Lenormand P, Julbe A, Ansart F, Guizard C |
| 2994 - 3002 |
CO electrooxidation study on Pt and Pt-Ru in H3PO4 using MEA with PBI-H3PO4 membrane
Modestov AD, Tarasevich MR, Leykin AY |
| 3003 - 3008 |
Corrosion of carbon supports at cathode during hydrogen/air replacement at anode studied by visualization of oxygen partial pressures in a PEFC-Start-up/shut-down simulation
Ishigami Y, Takada K, Yano H, Inukai J, Uchida M, Nagumo Y, Hyakutake T, Nishide H, Watanabe M |
| 3009 - 3014 |
Polymer coatings as separator layers for microbial fuel cell cathodes
Watson VJ, Saito T, Hickner MA, Logan BE |
| 3015 - 3025 |
Design and fabrication of a silicon-based direct methanol fuel cell with a new cathode spoke structure
Zhang YF, Yuan ZY, Li YL, Jia Q, Chen S, Liu XW |
| 3026 - 3032 |
Microstructural and electrochemical impedance study of nickel-Ce0.9Gd0.1O1.95 anodes for solid oxide fuel cells fabricated by ultrasonic spray pyrolysis
Liu L, Kim GY, Hillier AC, Chandra A |
| 3033 - 3038 |
Silver nanorods for oxygen reduction: Strong effects of protecting ligand on the electrocatalytic activity
Lu YZ, Wang YC, Chen W |
| 3039 - 3047 |
Synthesis and properties of novel sulfonated polybenzimidazoles from disodium 4,6-bis(4-carboxyphenoxy)benzene-1,3-disulfonate
Sheng L, Xu HJ, Guo XX, Fang JH, Fang LA, Yin J |
| 3048 - 3053 |
Sulfated SnO2 modified multi-walled carbon nanotubes - A mixed proton-electron conducting support for Pt catalysts in direct ethanol fuel cells
Zhang XW, Zhu H, Guo ZJ, Wei YS, Wang FH |
| 3054 - 3059 |
Characteristics of a fluidized bed electrode for a direct carbon fuel cell anode
Zhang JB, Zhong ZP, Shen DK, Xiao JM, Fu ZM, Zhang HY, Zhao JX, Li WL, Yang M |
| 3060 - 3072 |
Effect of H2O2 on Nafion (R) properties and conductivity at fuel cell conditions
Hongsirikarn K, Mo XH, Goodwin JG, Creager S |
| 3073 - 3082 |
Three-dimensional numerical analysis of mixed ionic and electronic conducting cathode reconstructed by focused ion beam scanning electron microscope
Matsuzaki K, Shikazono N, Kasagi N |
| 3083 - 3088 |
Assessment of perovskite-type La0.8Sr0.2ScxMn1-xO3-delta oxides as anodes for intermediate-temperature solid oxide fuel cells using hydrocarbon fuels
Sengodan S, Yeo HJ, Shin JY, Kim G |
| 3089 - 3094 |
Pd-substituted (La,Sr)CrO3-delta-Ce0.9Gd0.1O2-delta solid oxide fuel cell anodes exhibiting regenerative behavior
Bierschenk DM, Potter-Nelson E, Hoel C, Liao YG, Marks L, Poeppelmeier KR, Barnett SA |
| 3095 - 3098 |
Improved electrochemical performance and thermal compatibility of Fe-and Cu-doped SmBaCo2O5+delta-Ce0.9Gd0.1O1.95 composite cathode for intermediate-temperature solid oxide fuel cells
Lee SJ, Kim DS, Muralidharan P, Jo SH, Kim DK |
| 3099 - 3103 |
Poly(vinylidene fluoride) based anion conductive ionomer as a catalyst binder for application in anion exchange membrane fuel cell
Zhang FX, Zhang HM, Qu C, Ren JX |
| 3104 - 3108 |
Preparation and electrochemical performance of Pr2Ni0.6Cu0.4O4 cathode materials for intermediate-temperature solid oxide fuel cells
Wang YF, Cheng JG, Jiang QM, Yang JF, Gao JF |
| 3109 - 3113 |
Synthesis and characterization of scandia ceria stabilized zirconia powders prepared by polymeric precursor method for integration into anode-supported solid oxide fuel cells
Tu HY, Liu X, Yu QC |
| 3114 - 3118 |
Effect of electrode mass ratio on aging of activated carbon based supercapacitors utilizing organic electrolytes
Cericola D, Kotz R, Wokaun A |
| 3119 - 3123 |
Building three-dimensional Pt catalysts on TiO2 nanorod arrays for effective ethanol electrooxidation
He XS, Hu CG |
| 3124 - 3128 |
Effects of acetone on electrooxidation of 2-propanol in alkaline medium on the Pd/Ni-foam electrode
Cheng YH, Liu Y, Cao DX, Wang GL, Gao YY |
| 3129 - 3133 |
Fabrication and characterization of Sm0.2Ce0.8O2-delta-Sm0.5Sr0.5CoO3-delta composite cathode for anode supported solid oxide fuel cell
Chang JC, Lee MC, Yang RJ, Chang YC, Lin TN, Wang CH, Kao WX, Lee LS |
| 3134 - 3140 |
A versatile salt evaporation reactor system for SOFC operando studies on anode contamination and degradation with impedance spectroscopy
Nurk G, Holtappels P, Figi R, Wochele J, Wellinger M, Braun A, Graule T |
| 3141 - 3148 |
Design of thermal management subsystem for a 5 kW polymer electrolyte membrane fuel cell system
Asghari S, Akhgar H, Imani BF |
| 3149 - 3162 |
Solid oxide fuel cell/gas turbine trigeneration system for marine applications
Tse LKC, Wilkins S, McGlashan N, Urban B, Martinez-Botas R |
| 3163 - 3171 |
On-board reforming of biodiesel and bioethanol for high temperature PEM fuel cells: Comparison of autothermal reforming and steam reforming
Martin S, Worner A |
| 3172 - 3177 |
Study of sulfur dioxide crossover in proton exchange membrane fuel cells
Zhai JX, Hou M, Zhang HB, Zhou ZM, Fu J, Shao ZG, Yi BL |
| 3178 - 3185 |
Percolation micro-model to predict the effective properties of the composite electrode with poly-dispersed particle sizes
Chen DF, Lu L, Li JY, Yu ZD, Kong W, Zhu HY |
| 3186 - 3194 |
Computational modeling of a direct propane fuel cell
Khakdaman H, Bourgault Y, Ternan M |
| 3195 - 3203 |
Pore scale modeling of a proton exchange membrane fuel cell catalyst layer: Effects of water vapor and temperature
Lange KJ, Sui PC, Djilali N |
| 3204 - 3222 |
A quasi-two-dimensional electrochemistry modeling tool for planar solid oxide fuel cell stacks
Lai K, Koeppel BJ, Choi KS, Recknagle KP, Sun X, Chick LA, Korolev V, Khaleel M |
| 3223 - 3232 |
An analytical model of view factors for radiation heat transfer in planar and tubular solid oxide fuel cells
Bao C, Cai NS, Croiset E |
| 3233 - 3238 |
Characterization of bubble formation in microfluidic fuel cells employing hydrogen peroxide
Shyu JC, Huang CL |
| 3239 - 3243 |
Flexible thermoelectric generator for ambient assisted living wearable biometric sensors
Francioso L, De Pascali C, Farella I, Martucci C, Creti P, Siciliano P, Perrone A |
| 3244 - 3248 |
Durability study of KOH doped polybenzimidazole membrane for air-breathing alkaline direct ethanol fuel cell
Hou HY, Wang SL, Jiang QA, Jin W, Jiang LH, Sun GQ |
| 3249 - 3254 |
Arc ion plated Cr/CrN/Cr multilayers on 316L stainless steel as bipolar plates for polymer electrolyte membrane fuel cells
Zhang M, Wu B, Lin GQ, Shao ZG, Hou M, Yi BL |
| 3255 - 3259 |
A tapered serpentine flow field for the anode of micro direct methanol fuel cells
Zhang YF, Zhang P, Yuan ZY, He H, Zhao YR, Liu XW |
| 3260 - 3270 |
A new topology of fuel cell hybrid power source for efficient operation and high reliability
Bizon N |
| 3271 - 3279 |
An experimental and analytical comparison study of power management methodologies of fuel cell-battery hybrid vehicles
Fadel A, Zhou BA |
| 3280 - 3289 |
Energy management of a fuel cell/ultracapacitor hybrid power system using an adaptive optimal-control method
Lin WS, Zheng CH |
| 3290 - 3295 |
Preparation and characterization of core-shell battery materials for Li-ion batteries manufactured by substrate induced coagulation
Basch A, Albering JH |
| 3296 - 3302 |
Thermodynamic consistent transport theory of Li-ion batteries
Latz A, Zausch J |
| 3303 - 3309 |
Study of multi-walled carbon nanotubes for lithium-ion battery electrodes
Varzi A, Taubert C, Wohlfahrt-Mehrens M, Kreis M, Schutz W |
| 3310 - 3316 |
Electrochemical performance of highly mesoporous nitrogen doped carbon cathode in lithium-oxygen batteries
Kichambare P, Kumar J, Rodrigues S, Kumar B |
| 3317 - 3324 |
Electrochemical effects of ALD surface modification on combustion synthesized LiNi1/3Mn1/3Co1/3O2 as a layered-cathode material
Riley LA, Van Ana S, Cavanagh AS, Yan YF, George SM, Liu P, Dillon AC, Lee SH |
| 3325 - 3330 |
AgxVOPO4: A demonstration of the dependence of battery-related electrochemical properties of silver vanadium phosphorous oxides on Ag/V ratios
Kim YJ, Lee CY, Marschilok AC, Takeuchi KJ, Takeuchi ES |
| 3331 - 3341 |
Characteristics of mechanochemically prepared host-guest hybrid nanocomposites of vanadium oxide and conducting polymers
Posudievsky OY, Kozarenko OA, Dyadyun VS, Jorgensen SW, Spearot JA, Koshechko VG, Pokhodenko VD |
| 3342 - 3345 |
High lithium ionic conductivity in the garnet-type oxide Li7-X La-3(Zr2-X, Nb-X)O-12 (X=0-2)
Ohta S, Kobayashi T, Asaoka T |
| 3346 - 3349 |
MnO/C core-shell nanorods as high capacity anode materials for lithium-ion batteries
Sun B, Chen ZX, Kim HS, Ahn H, Wang GX |
| 3350 - 3354 |
Improved capacitive properties of layered manganese dioxide grown as nanowires
Vargas OA, Caballero A, Hernan L, Morales J |
| 3355 - 3359 |
New high-throughput methods of investigating polymer electrolytes
Alcock HJ, White OC, Jegelevicius G, Roberts MR, Owen JR |
| 3360 - 3370 |
A numerical investigation on the efficiency of range extending systems using Advanced Vehicle Simulator
Varnhagen S, Same A, Remillard J, Park JW |
| 3371 - 3377 |
Impact of real world driving pattern and all-electric range on battery sizing and cost of plug-in hybrid electric two-wheeler
Amjad S, Rudramoorthy R, Neelakrishnan S, Varman KSR, Arjunan TV |
| 3378 - 3386 |
Transmission network-based energy and environmental assessment of plug-in hybrid electric vehicles
Valentine K, Acquaviva J, Foster EJ, Zhang KM |
| 3387 - 3387 |
Primary Li-air cell development (vol 196, pg 1498, 2011)
Crowther O, Meyer B, Morgan M, Salomon M |
