| 3345 - 3358 |
Oxygen reduction and transportation mechanisms in solid oxide fuel cell cathodes
Li YH, Gemmen R, Liu XB |
| 3359 - 3364 |
Electrode performance and analysis of reversible solid oxide fuel cells with proton conducting electrolyte of BaCe0.5Zr0.3Y0.2O3-delta
He F, Song D, Peng RR, Meng GY, Yang SF |
| 3365 - 3373 |
Measurement of liquid water content in cathode gas diffusion electrode of polymer electrolyte fuel cell
Nishida K, Murakami T, Tsushima S, Hirai S |
| 3374 - 3379 |
Low Pt content on the Pd45Pt5Sn50 cathode catalyst for PEM fuel cells
Salvador-Pascual JJ, Collins-Martinez V, Lopez-Ortiz A, Solorza-Feria O |
| 3380 - 3385 |
Nafion-assisted cross-linking of sulfonated poly(arylene ether ketone) bearing carboxylic acid groups and their composite membranes for fuel cells
Lin HD, Zhao CJ, Na H |
| 3386 - 3393 |
Cobalt-site cerium doped SmxSr1-xCoO3-delta oxides as potential cathode materials for solid-oxide fuel cells
Zhang GR, Dong XL, Liu ZK, Zhou W, Shao ZP, Jin WQ |
| 3394 - 3401 |
Alloys and oxides on carbon-supported Pt-Sn electrocatalysts for ethanol oxidation
Godoi DRM, Perez J, Villullas HM |
| 3402 - 3406 |
Enhanced ionic transport in fine-grained scandia-stabilized zirconia ceramics
Abdala PM, Custo GS, Lamas DG |
| 3407 - 3415 |
Direct methanol fuel cell based on poly(vinyl alcohol)/titanium oxide nanotubes/poly(styrene sulfonic acid) (PVA/nt-TiO2/PSSA) composite polymer membrane
Yang CC, Chien WC, Li YJJ |
| 3416 - 3424 |
Esterification as a diagnostic tool to predict proton conductivity affected by impurities on Nafion components for proton exchange membrane fuel cells
Hongsirikarn K, Mo XH, Goodwin JG |
| 3425 - 3430 |
High temperature polymer electrolyte membrane fuel cell performance of PtxCoy/C cathodes
Rao CV, Parrondo J, Ghatty SL, Rambabu B |
| 3431 - 3450 |
Alkaline direct alcohol fuel cells
Antolini E, Gonzalez ER |
| 3451 - 3462 |
Towards operating direct methanol fuel cells with highly concentrated fuel
Zhao TS, Yang WW, Chen R, Wu QX |
| 3463 - 3471 |
Characterization of interfacial morphology in polymer electrolyte fuel cells: Micro-porous layer and catalyst layer surfaces
Hizir FE, Ural SO, Kumbur EC, Mench MM |
| 3472 - 3476 |
A novel direct methanol fuel cell with sol-gel flux phase
Ju JF, Wu DH, Ge CW, Shi YJ |
| 3477 - 3480 |
Significant improvement in cathode performance for proton exchange membrane fuel cell by a novel double catalyst layer design
Su HN, Liao SJ, Wu YN |
| 3481 - 3484 |
A stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells
Tao ZT, Zhu ZW, Wang HQ, Liu W |
| 3485 - 3489 |
Characterization and voltammetric behavior of PtyMozOx/C electrodes prepared by the thermal decomposition of polymeric precursors
Aguiar ACR, Olivi P |
| 3490 - 3493 |
Polypyrrole/carbon black composite as a novel oxygen reduction catalyst for microbial fuel cells
Yuan Y, Zhou SG, Zhuang L |
| 3494 - 3497 |
Thin film solid oxide fuel cells with copper cermet anodes
Zhan ZL, Lee SI |
| 3498 - 3503 |
Pt overgrowth on carbon supported PdFe seeds in the preparation of core-shell electrocatalysts for the oxygen reduction reaction
Wang W, Wang RF, Ji S, Feng HQ, Wang H, Lei ZQ |
| 3504 - 3507 |
High-performance PrBaCo2O5+delta-Ce0.8Sm0.2O1.9 composite cathodes for intermediate temperature solid oxide fuel cell
Zhu CJ, Liu XM, Yi CS, Pei L, Wang DJ, Yan DT, Yao KG, Lu TQ, Su WH |
| 3508 - 3512 |
Steady liquid water saturation distribution in hydrophobic gas-diffusion layers with engineered pore paths: An invasion-percolation pore-network analysis
Lee KJ, Kang JH, Nam JH, Kim CJ |
| 3513 - 3522 |
Residual stress and plastic strain analysis in the brazed joint of bonded compliant seal design in planar solid oxide fuel cell
Jiang WC, Tu ST, Li GC, Gong JM |
| 3523 - 3528 |
Nanoporous separator and low fuel concentration to minimize crossover in direct methanol laminar flow fuel cells
Hollinger AS, Maloney RJ, Jayashree RS, Natarajan D, Markoski LJ, Kenis PJA |
| 3529 - 3535 |
Fabrication of metallic bipolar plate for proton exchange membrane fuel cells by rubber pad forming
Liu YX, Hua L |
| 3536 - 3545 |
An impedance study for the anode micro-porous layer in an operating direct methanol fuel cell
Yang SH, Chen CY, Wang WJ |
| 3546 - 3552 |
Corrosion resistance characteristics of stamped and hydroformed proton exchange membrane fuel cell metallic bipolar plates
Dundar F, Dur E, Mahabunphachai S, Koc M |
| 3553 - 3568 |
In situ comparison of water content and dynamics in parallel, single-serpentine, and interdigitated flow fields of polymer electrolyte membrane fuel cells
Spernjak D, Prasad AK, Advani SG |
| 3569 - 3578 |
On the performance of membraneless laminar flow-based fuel cells
Jayashree RS, Yoon SK, Brushett FR, Lopez-Montesinos PO, Natarajan D, Markoski LJ, Kenis PJA |
| 3579 - 3589 |
Heat-up and start-up modeling of direct internal reforming solid oxide fuel cells
Colpan CO, Hamdullahpur F, Dincer I |
| 3590 - 3596 |
Localised corrosion processes of austenitic stainless steel bipolar plates for polymer electrolyte membrane fuel cells
Mele C, Bozzini B |
| 3597 - 3604 |
Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell
Zhang GS, Guo LJ, Ma LZ, Liu HT |
| 3605 - 3611 |
CoFe2O4 spinel protection coating thermally converted from the electroplated Co-Fe alloy for solid oxide fuel cell interconnect application
Bi ZH, Zhu JH, Batey JL |
| 3612 - 3620 |
Mechanical behavior and electrical conductivity of La1-xCaxCoO3 (x=0, 0.2, 0.4, 0.55) perovskites
Pathak S, Kuebler J, Payzant A, Orlovskaya N |
| 3621 - 3630 |
Analysis of operating parameters considering flow orientation for the performance of a proton exchange membrane fuel cell using the Taguchi method
Wu HW, Gu HW |
| 3631 - 3635 |
Creep properties of solid oxide fuel cell glass-ceramic seal G18
Milhans J, Khaleel M, Sun X, Tehrani M, Al-Haik M, Garmestani H |
| 3636 - 3639 |
Nanochannel arrays as supports for proton exchange membranes in microfluidic fuel cells
Wadsworth CJ, Yanagisawa N, Dutta D |
| 3640 - 3644 |
Active water management at the cathode of a planar air-breathing polymer electrolyte membrane fuel cell using an electroosmotic pump
Fabian T, O'Hayre R, Litster S, Prinz FB, Santiago JG |
| 3645 - 3648 |
Detailed investigation of ion exchange in ball-milled LiH + MgB2 system using ultra-high field nuclear magnetic resonance spectroscopy
Hu JZ, Kwak JH, Yang ZG, Wan XF, Shaw LL |
| 3649 - 3654 |
Anode properties of Ru-coated Si thick film electrodes prepared by gas-deposition
Usui H, Kashiwa Y, Iida T, Sakaguchi H |
| 3655 - 3660 |
Surface structural disordering in graphite upon lithium intercalation/deintercalation
Sethuraman VA, Hardwick LJ, Srinivasan V, Kostecki R |
| 3661 - 3667 |
Synthesis of carbon-coated LiFePO4 nanoparticles with high rate performance in lithium secondary batteries
Konarova M, Taniguchi I |
| 3668 - 3675 |
Ternary polymer electrolytes containing pyrrolidinium-based polymeric ionic liquids for lithium batteries
Appetecchi GB, Kim GT, Montanina M, Carewska M, Marcilla R, Mecerreyes D, De Meatza I |
| 3676 - 3679 |
Improvement of the high rate capability of hierarchical structured Li4Ti5O12 induced by the pseudocapacitive effect
Lai C, Dou YY, Li X, Gao XP |
| 3680 - 3683 |
Structural and electrochemical properties of Cl-doped LiFePO4/C
Sun CS, Zhang Y, Zhang XJ, Zhou Z |
| 3684 - 3688 |
A high energy density lithium/sulfur-oxygen hybrid battery
Zhang SS, Foster D, Read J |
| 3689 - 3692 |
A new lithium salt with 3-fluoro-1,2-benzenediolato and oxalato complexes of boron for lithium battery electrolytes
Xue ZM, Ji CQ, Zhou W, Chen CH |
| 3693 - 3708 |
Modeling the effect of anisotropy of gas diffusion layer on transport phenomena in a direct methanol fuel cell
Miao Z, He YL, Zou JQ |
| 3709 - 3714 |
Effect of succinic anhydride as an electrolyte additive on electrochemical characteristics of silicon thin-film electrode
Han GB, Ryou MH, Cho KY, Lee YM, Park JK |
| 3715 - 3719 |
3.0V-class film-type lithium primary battery with highly improved energy density
Lee YG, Kim J, Kim S, Kim KM |
| 3720 - 3729 |
Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management
Viswanathan VV, Choi D, Wang DH, Xu W, Towne S, Williford RE, Zhang JG, Liu J, Yang ZG |
| 3730 - 3734 |
Dye-sensitized, nano-porous TiO2 solar cell with poly(acrylonitrile): MgI2 plasticized electrolyte
Bandara TMWJ, Dissanayake MAKL, Albinsson I, Mellander BE |
| 3735 - 3741 |
Hydrometallurgical separation of rare earth elements, cobalt and nickel from spent nickel-metal-hydride batteries
Rodrigues LEOC, Mansur MB |
| 3742 - 3747 |
Synthesis and pseudocapacitive studies of composite films of polyaniline and manganese oxide nanoparticles
Chen L, Sun LJ, Luan F, Liang Y, Li Y, Liu XX |
| 3748 - 3756 |
Optimization of power and energy densities in supercapacitors
Robinson DB |
| 3757 - 3760 |
Electrochemically synthesized nanocrystalline spinel thin film for high performance supercapacitor
Gupta V, Gupta S, Miura N |
| 3761 - 3764 |
Electrochemical performance of carbon-coated lithium manganese silicate for asymmetric hybrid supercapacitors
Karthikeyan K, Aravindan V, Lee SB, Jang IC, Lim HH, Park GJ, Yoshio M, Lee YS |
