| 1 - 1 |
Selected papers presented at the 2nd National Congress on Fuel Cells (CONAPPICE 2006) - Preface
Daza L, Chaparro AM |
| 2 - 8 |
Low temperature anode-supported solid oxide fuel cells based on gadolinium doped ceria electrolytes
Pinol S, Morales M, Espiell F |
| 9 - 16 |
Catalytic properties of monometallic copper and bimetallic copper-nickel systems combined with ceria and Ce-X (X = Gd, Tb) mixed oxides applicable as SOFC anodes for direct oxidation of methane
Hornes A, Gamarra D, Munuera G, Conesa JC, Martinez-Arias A |
| 17 - 24 |
In situ high temperature neutron powder diffraction study of La2Ni0.6Cu0.4O4+delta in air: Correlation with the electrical behaviour
Aguadero A, Alonso JA, Fernandez-Diaz MT, Escudero MJ, Daza L |
| 25 - 34 |
An assessment on convective and radiative heat transfer modelling in tubular solid oxide fuel cells
Sanchez D, Munoz A, Sanchez T |
| 35 - 39 |
Structural and electrical properties of thin films of Pr0.8Sr0.2Fe0.8Ni0.2O3-delta
de Larramendi IR, Anton RL, de Larramendi JIR, Baliteau S, Mauvy F, Grenier JC, Rojo T |
| 40 - 46 |
Optimization of glass-ceramic sealant compositions in the system MgO-BaO-SiO2 for solid oxide fuel cells (SOFC)
Pascual MJ, Guillet A, Duran A |
| 47 - 52 |
Preparation and characterisation of SOFC anodic materials based on Ce-Cu
Fuerte A, Valenzuela RX, Daza L |
| 53 - 58 |
Chemical and electrical properties of BaPr0.7Gd0.3O3-delta
Magraso A, Espiell F, Segarra M, Irvine JTS |
| 59 - 64 |
Platinum supported on functionalized ordered mesoporous carbon as electrocatalyst for direct methanol fuel cells
Calvillo L, Lazaro MJ, Garcia-Bordeje E, Moliner R, Cabot PL, Esparbe I, Pastor E, Quintana JJ |
| 65 - 70 |
Electrochemical quartz crystal microbalance study of the electrodeposition of Co, Pt and Pt-Co alloy
Martin AJ, Chaparro AM, Daza L |
| 71 - 76 |
Bifunctional amorphous alloys more tolerant to carbon monoxide
Barranco J, Pierna AR |
| 77 - 84 |
Study of membrane electrode assemblies for PEMFC, with cathodes prepared by the electrospray method
Chaparro AM, Benitez R, Gubler L, Scherer GG, Daza L |
| 85 - 91 |
Description of gasket failure in a 7 cell PEMFC stack
Husar A, Serra M, Kunusch C |
| 92 - 97 |
Conductivity in zeolite-polymer composite membranes for PEMFCs
Sancho T, Soler J, Pina MP |
| 98 - 102 |
Synthesis of the ceramic-metal catalysts (PtRuNi-TiO2) by the combustion method
Moreno B, Chinarro E, Fierro JLG, Jurado JR |
| 103 - 109 |
Hydrogen production by thermo-catalytic decomposition of methane: Regeneration of active carbons using CO2
Pinilla JL, Suelves I, Utrilla R, Galvez ME, Lazaro MJ, Moliner R |
| 110 - 116 |
Catalytic processes during preferential oxidation of CO in H-2-rich streams over catalysts based on copper-ceria
Gamarra D, Hornes A, Koppany Z, Schay Z, Munuera G, Soria J, Martinez-Arias A |
| 117 - 122 |
Hydrogenation properties of pure magnesium and magnesium-aluminium thin films
Domenech-Ferrer R, Sridharan MG, Garcia G, Pi F, Rodriguez-Viejo J |
| 123 - 130 |
Thermodynamic analysis and performance of a 1 kW bioethanol processor for a PEMFC operation
Benito M, Padilla R, Sanz JL, Daza L |
| 131 - 139 |
Evaluation and simultaneous optimization of bio-hydrogen production using 3(2) factorial design and the desirability function
Cuetos MJ, Gomez X, Escapa A, Moran A |
| 140 - 143 |
Hydrogen production by reforming of hydrocarbons and alcohols in a dielectric barrier discharge
Sarmiento B, Brey JJ, Viera IG, Gonzalez-Elipe AR, Cotrino J, Rico VJ |
| 144 - 149 |
Aluminum and aluminum alloys as sources of hydrogen for fuel cell applications
Soler L, Macanas J, Munoz M, Casado J |
| 150 - 157 |
Hydrogen production by thermocatalytic decomposition of methane over Ni-Al and Ni-Cu-Al catalysts: Effect of calcination temperature
Echegoyen Y, Suelves I, Lazaro MJ, Moliner R, Palacios JM |
| 158 - 166 |
Steam reforming of ethanol at moderate temperature: Multifactorial design analysis of Ni/La2O3-Al2O3, and Fe- and Mn-promoted Co/ZnO catalysts
Torres JA, Llorca J, Casanovas A, Dominguez M, Salvado J, Montane D |
| 167 - 176 |
Zirconia supported catalysts for bioethanol steam reforming: Effect of active phase and zirconia structure
Benito M, Padilla R, Rodriguez L, Sanz JL, Daza L |
| 177 - 183 |
Development of biogas reforming Ni-La-Al catalysts for fuel cells
Benito M, Garcia S, Ferreira-Aparicio P, Serrano LG, Daza L |
| 184 - 193 |
Airport electric vehicle powered by fuel cell
Fontela P, Soria A, Mielgo J, Sierra JF, de Blas J, Gauchia L, Martinez JM |
| 194 - 197 |
Design of control systems for portable PEM fuel cells
Vega-Leal AP, Palomo FR, Barragan F, Garcia C, Brey JJ |
| 198 - 204 |
Production of electricity from the treatment of urban waste water using a microbial fuel cell
Rodrigo MA, Canizares P, Lobato J, Paz R, Saez C, Linares JJ |
| 205 - 212 |
Performance improvement of a PEMFC system controlling the cathode outlet air flow
Feroldi D, Serra M, Riera J |
| 213 - 219 |
Evaluation of automobiles with alternative fuels utilizing multicriteria techniques
Brey JJ, Contreras I, Carazo AF, Brey R, Hernandez-Diaz AG, Castro A |
