| 77 - 79 |
Heating Rate and Composition Dependence of the Glass-Transition Temperature of a Ternary Chalcogenide Glass
Joshi SR, Pratap A, Saxena NS, Saksena MP, Kumar A |
| 80 - 81 |
Net Shape Cold Plastic Forming of Aluminum-Based Metal-Matrix Composites
Kampus Z, Jiang J, Dodd B |
| 82 - 83 |
Optical-Properties of Thermally Deposited Polycrystalline Tin Telluride Films in the Infrared Region of Spectrum
Fouad SS, Morsy AY, Soliman HS, Alganainy G |
| 84 - 85 |
Electrolytic Hydrogen Transport in Palladium
Chen CL, Wu JK |
| 86 - 88 |
Electrical-Conductivity of Sintered Niobia-Doped and Magnesia-Doped Thoria
Balakrishna P, Ananthapadmanabhan PV, Ramakrishnan P |
| 89 - 90 |
Phase-Diagrams and Sinter AIDS (Cs2O) for SiO2-Sinterglass
Kim KD, Ondracek G |
| 91 - 92 |
Novel Dental Cements Formed Between Poly(Vinyl Phosphonic Acid), Pvpa, and Heat-Treated Zinc-Oxide
Akinmade AO, Braybrook JH, Nicholson JW |
| 93 - 95 |
Compaction of Plastic Powders
Baumard JF, Coupelle P |
| 96 - 98 |
Kinetics of the Formation of Cobalt Disilicide at High-Temperature Under Rapid Electron-Beam Heating
Warris J, Suleman M, Mahmood F, Ahmed H |
| 99 - 100 |
Crystallization Behavior of Fe60-Xni20+xb20 - Nickel Dependence
Rao GV, Bhatnagar AK |
| 101 - 102 |
A Simple, Approximate Representation of the Electrical Behavior of Metal-Silicon Contacts
Winterton SS, Smy TJ, Tarr NG |
| 103 - 104 |
Photoinduced Charge-Transfer of Cu-Doped ZnO Film
Kobayashi K, Udaka H, Matsushima S, Okada G |
| 105 - 106 |
Surface-Chemistry of Pan Carbon-Fibers in Relation to Ilss in Epoxy-Resin Composites
Bradley RH, Ling X, Sutherland I, Davies L |
| 107 - 111 |
Effect of Grain-Size on Deformation-Induced Martensite Formation in 304-Stainless-Steel and 316-Stainless-Steel During Room-Temperature Tensile Testing
Varma SK, Kalyanam J, Murr LE, Srinivas V |
| 112 - 114 |
Modification of Fe-Cr-C Alloys Using Mischmetal
Peev K, Radulovic M, Fiset M |
| 115 - 116 |
A Simple Method for Determination of the Aggregate Content in Hardened Concrete
Xie P, Fu Y, Gu P, Beaudoin JJ |
| 117 - 118 |
Formation and Structure of 54-Percent-Zr-46-Percent-Cu Amorphous Alloy
Radojevic BB, Molokanov V |
| 119 - 122 |
The Dendritic Growth of YBa2Cu3Ox
Risse G, Schlafer U, Wendrock H, Fischer K |
| 123 - 125 |
Electric-Field-Induced Growth of Linear Fiber-Like Structures in a Medium of Laser-Ablated Micrometer-Sized Particles
Sharma A |
| 126 - 128 |
Liquid-Crystalline Epoxy-Resins - Curing of Blends of Mesogenic and Nonmesogenic Epoxy Monomers
Carfagna C, Amendola E, Giamberini M |
| 129 - 130 |
Thermal Conduction Behavior of (Ca,X)Zr-4(PO4)(6) Ceramic (X=li, Mg, Zr)
Liu DM |
| 131 - 134 |
Static Fatigue Resistance of Si3N4+si3N4 Whisker Ceramics at 1200-Degrees-C
Dusza J, Sajgalik P |
| 135 - 136 |
The Influence of Atmosphere and Sample Surface-Area on Phase Information in Melt-Quenched Bi(Pb)-Sr-Ca-Cu-O Glass-Ceramics
Griffiths J, Hill R |
| 137 - 141 |
Fracture-Behavior of Polycrystalline Iridium Under Tension in the Temperature-Range 20-1500 Degrees-C
Panfilov P, Novgorodov V, Yermakov A |
| 142 - 145 |
Investigation of Failures in Stainless-Steel Orthopedic Implant Devices - Fatigue Failure Due to Improper Fixation of a Compression Bone Plate
Sivakumar M, Mudali UK, Rajeswari S |
| 146 - 147 |
Preparation and Characterization of Organic Thin-Film for Semiconductor-Laser Frequency-Doubling
Liu MG, Jiang MH, Tao XT, Yuan DR, Xu D, Zhang N, Shao ZS |
| 148 - 150 |
Effect of Ramp Treatment on the Cyclic Response of Coarse-Grained Copper
Llanes L, Laird C |
