| 1445 - 1447 |
Synthesis and electrorheological characterization of carbonaceous particle suspensions
Choi HJ, Kim JW, Yoon SH, Fujiura R, Komatsu M, Jhon MS |
| 1449 - 1451 |
Direct formation of the AlNi3 phase in Al-75Ni cold rolled multilayers
Sieber H, Perepezko JH |
| 1453 - 1455 |
Preparation and characterization of Sb2S3 thin films using a successive ionic layer adsorption and reaction (SILAR) method
Sankapal BR, Mane RS, Lokhande CD |
| 1457 - 1459 |
"Percolation effect" and mechanical behavior of carbon black filled polyethylene
Chodak I, Krupa I |
| 1461 - 1463 |
Increasing the Si3N4/1.25Cr-0.5Mo steel joint strength by using the method of drilling holes by laser in the surface layer of brazed Si3N4
Xiong HP, Wan CG, Zhou ZF |
| 1465 - 1467 |
Change in chemical state of fluorinated polyimides after the electroless Cu deposition solution treatment
Hsu DT, Shi FG, Lopatin S, Shacham-Diamand Y, Zhao B, Brongo M, Vasudev PK |
| 1469 - 1471 |
New process for producing submicron tungsten monocarbide powders
Koc R, Kodambaka SK |
| 1473 - 1475 |
Effect of aging on the porous texture of silica aerogels prepared by NH4OH and NH4F catalyzed sol-gel process
Suh DJ, Park TJ, Sonn JH, Lim JC |
| 1477 - 1480 |
Processing of an open-cellular AZ91 magnesium alloy with a low density of 0.05 g/cm(3)
Yamada Y, Shimojima K, Sakaguchi Y, Mabuchi M, Nakamura M, Asahina T, Mukai T, Kanahashi H, Higashi K |
| 1481 - 1483 |
Influence of Ne+ bombarding energy on the properties of diamond-like carbon film by ion beam assisted deposition
Wang J, Li WZ, Li HD |
| 1485 - 1488 |
Preparation of carbon nitride films with high nitrogen content by electrodeposition from an organic solution
Fu Q, Cao CB, Zhu HS |
| 1489 - 1491 |
A new route for preparing magnetic polyolefins with well dispersed nanometer magnetic particles in polymer matrix using supported Fe3O4/AIR(3)/TiCl4 nanometer magnetic Ziegler-Natta catalyst
Wang L, Feng LX, Xie T, Qing XF |
| 1493 - 1495 |
Sensitivity behavior of tin oxide based semiconducting sensor for fluorocarbons
Rao BB, Rao VJ |
| 1497 - 1499 |
The characterization of passive films on Fe-Si alloy in boiling sulfuric acid
Ioka I, Mori J, Kato C, Futakawa M, Onuki K |
| 1501 - 1503 |
Large linear electro-optical effects of highly double-oriented ferroelectric thin films of vinylidene fluoride and trifluoroethylene copolymers
Tajitsu Y |
| 1505 - 1507 |
SAN-Na+-montmorillonite nanocomposite for electrorheological material
Choi HJ, Kim JW, Noh MH, Lee DC, Suh MS, Shin MJ, Jhon MS |
| 1509 - 1511 |
Influence of dislocation structure on two-way shape memory effect in a CuZnAlMnNi alloy
Bai YJ, Shi QQ, Sun DS, Bian XF, Geng GL |
| 1513 - 1516 |
Electrical conductivity of amine-borane-derived boron carbide nitride
Bill J, Aldinger F, Petzow G, Sloma M, Maier J, Riedel R |
| 1517 - 1519 |
Growth of columnar grains during zirconia-yttria splat solidification
Chraska T, King AH |
| 1521 - 1523 |
Effect of hydrogen on the stress corrosion cracking behavior of Al(18)B(4)O(33)w/pure Al composite
Hu J, Song M, Fei WD, Yao CK |
| 1525 - 1527 |
Effect of annealing treatment on the microstructure of matrix in SiC whisker reinforced aluminum composite
Hu J, Luo RS, Fei WD, Yao CK |
| 1529 - 1532 |
Electrical and dielectric properties of zinc substituted magnesium rich manganese ferrites
Thummer KP, Joshi HH, Kulkarni RG |
| 1533 - 1535 |
Nucleation and formation of persistent slip band in cyclically deformed [011] copper single crystals
Li XW, Wang ZG, Li SX |
| 1537 - 1538 |
Effects of nitrogen-induced h.c.p. martensite formation on corrosion resistance of plasma source ion nitrided austenitic stainless steel
Lei MK, Zhang ZL, Zhu XM |
