| 1145 - 1147 |
Micro- and macro-indentation fracture toughness of alumina
Lim LC, Muchtar A |
| 1149 - 1151 |
Effects of nitrogen on gamma ->epsilon martensitic transformation and damping capacity of Fe-16%Mn-X%N alloys
Lee YK |
| 1153 - 1155 |
Effect of melting time on the properties of Sn-P-O-Cl glasses
Shih PY |
| 1157 - 1161 |
Effect of Ti upon the interfacial reaction in SiCp/Al composites during multiple remelting above the liquidus
Fan TX, Zhang D, Wu RJ, Shibayanagi T, Naka M |
| 1163 - 1165 |
Rheological behavior of alumina aqueous suspension in acrylamide/polyacrylamide systems
Ma JT, Xie ZP, Huang Y, Miao HZ, Cheng YB |
| 1167 - 1169 |
Mechanical and electrical properties of (Ce1-xZrx)(0.85)Gd0.15O2-delta ceramics (0 <= x <= 0.5)
Zhang TS, Huang H, Zeng ZQ, Hing P, Kilner J |
| 1171 - 1174 |
On the single phase formed during low-temperature plasma nitriding of austenitic stainless steels
Meletis EI, Singh V, Jiang JC |
| 1175 - 1177 |
Silica-based materials for reclamation of Cs-135 at high temperatures
Massiot P, Centeno MA, Gouriou M, Laurent Y, Odriozola JA |
| 1179 - 1182 |
Kinetics of the structural changes in polyurethanes saturated with benzene during the desorption process
Grigoriew H, Wolinska-Grabczyk A, Plusa M, Bernstorff S |
| 1183 - 1185 |
Aqueous corrosion behavior of zircaloy-4 subjected to cerium ion implantation
Chen XW, Bai XD, Yu RH, Zhou QG, Peng DQ |
| 1187 - 1190 |
Synthesis, characterization and thermal behavior of Th-Mn-V-O oxides
Pai MR, Wani BN, Gupta NM |
| 1191 - 1194 |
Designing hydrogel coated textile scaffolds for tissue engineering: Effect of casting conditions and degradation behavior studied at microstructure level
Risbud MV, Karamuk E, Mayer J |
| 1195 - 1198 |
Pitting corrosion induced by the interaction between microstructures of iron-based alloy in chloride-containing solution
Li WS, Luo JL |
| 1199 - 1201 |
Use of saturation magnetism measurements to detect martensite formation in austenitic stainless steel after compressive deformation at high temperatures
Mumtaz K, Takahashi S, Echigoya J, Zhang L, Kamada Y, Sato M |
| 1203 - 1206 |
Effects of crystallization and loading-rate on the mode I fracture toughness of biodegradable poly(lactic acid)
Todo M, Shinohara N, Arakawa K |
| 1207 - 1209 |
Synthesis of carbon nanotubes from ethanol flame
Pan CX, Xu XR |
| 1211 - 1213 |
Influence of fiber defects on the stiffness properties of flax fibers-epoxy composite materials
Lamy B, Pomel C |
| 1215 - 1221 |
Boundary conditions during biaxial testing of planar connective tissues - Part II - Fiber orientation
Waldman SD, Sacks MS, Lee JM |
| 1223 - 1226 |
Properties of glass-spinel composites prepared by melt infiltration
Lee DY, Kim DJ, Song YS |
