| 1475 - 1489 |
Review graphite
Chung DDL |
| 1491 - 1496 |
In situ synthesis of AlPO4-14, CoAPO-44 and ZnAPO-34 films on alumina substrates
Zhang LX, Wang HT |
| 1497 - 1502 |
The influence of Si and Mg rich phases on the mechanical properties of 6061 Al-matrix composites reinforced with Al2O3
De Salazar JMG, Barrena MI |
| 1503 - 1513 |
Morphology, mechanical and thermal behavior of acrylate rubber/fluorocarbon elastomer/polyacrylate blends
Kader MA, Bhowmick AK, Inoue T, Chiba T |
| 1515 - 1522 |
The comparison of effects of four rare earth elements additions on structures and grain sizes of Ti-44Al alloy
Liu C, Xia K, Li W |
| 1523 - 1533 |
Transformation properties and microstructure of sputter-deposited Ni-Ti shape memory alloy thin films
Lehnert T, Crevoiserat S, Gotthardt R |
| 1535 - 1539 |
X-ray absorption spectroscopy, simulation and modeling of Si-DLC films
Palshin V, Tittsworth RC, Fountzoulas CG, Meletis EI |
| 1541 - 1546 |
Sintering of 6H(alpha)-SiC and 3C(beta)-SiC powders with B4C and C additives
Yoshimura HN, Da Cruz AC, Zhou Y, Tanaka H |
| 1547 - 1555 |
In-situ deformation of an open-cell flexible polyurethane foam characterised by 3D computed microtomography
Elliott JA, Windle AH, Hobdell JR, Eeckhaut G, Oldman RJ, Ludwig W, Boller E, Cloetens P, Baruchel J |
| 1557 - 1560 |
Effect of Ar heat treatment on oxygenated R-1-(x)Ca(x)Ba(2)Cu(3)3O(7)-delta (R = Y, Sm) superconductors
Gupta A, Sedky A, Narlikar AV, Singh DP |
| 1561 - 1573 |
Talc as nucleating agent of polypropylene: morphology induced by lamellar particles addition and interface mineral-matrix modelization
Ferrage E, Martin F, Boudet A, Petit S, Fourty G, Jouffret F, Micoud P, De Parseval P, Salvi S, Bourgerette C, Ferret J, Saint-Gerard Y, Buratto S, Fortune JP |
| 1575 - 1583 |
Finite element analysis of a polymer composite subjected to a sliding steel asperity - Part I - Normal fibre orientation
Goda T, Varadi K, Friedrich K, Giertzsch H |
| 1585 - 1591 |
Quantitative dilatometric analysis of intercritical annealing in a low-silicon TRIP steel
Zhao L, Kop TA, Rolin V, Sietsma J, Mertens A, Jacques PJ, Van der Zwaag S |
| 1593 - 1597 |
Evaluation of hot workability of particle reinforced aluminum matrix composites by using deformation efficiency
Park DH, Ko BC, Yoo YC |
| 1599 - 1609 |
Characterisation of crosslinked polyethylene materials by luminescence techniques
Teyssedre G, Tardieu G, Laurent C |
| 1611 - 1620 |
Phase relations in the system Cu-La-O and thermodynamic properties of CuLaO2 and CuLa2O4
Jacob KT, Jayadevan KP |
| 1621 - 1633 |
Surface properties and dispersion behaviour of precipitated silicas
Jesionowski T, Zurawska J, Krysztafkiewicz A |
| 1635 - 1644 |
J-R curve determination of magnesium hydroxide filled polypropylene using the normalization method
Morhain C, Velasco JI |
| 1645 - 1648 |
X-ray diffraction and magnetic analysis of deformation induced martensites in a Fe-17Mn-1.9Al-0.1C steel
Tavares SSM, Lafuente A, Miraglia S, Fruchart D |
| 1649 - 1660 |
Simulation of porosity by microballoon dispersion in epoxy and urethane: mechanical measurements and models
El-Hadek MA, Tippur HV |
| 1661 - 1665 |
Dispersion stability of Y-TZP/Ce-TZP powder system and slip casting
Kim MJ, Yang TY, Lee YB, Park HC, Stevens R |
| 1667 - 1673 |
The influence of starch swelling on the material properties of cooked potatoes
Ormerod A, Ralfs J, Jobling S, Gidley M |
| 1675 - 1682 |
Polarised infrared and differential scanning calorimetry studies on oriented vinyl pipe materials
Kwon JA, Truss RW |
| 1683 - 1692 |
Tensile and compressive properties of flax fibres for natural fibre reinforced composites
Bos HL, Van den Oever MJA, Peters OCJJ |
| 1693 - 1699 |
Formation of TiN whiskers through carbothermal reduction of TiO2
Krishnarao RV, Subrahmanyam J, Yadagiri M |
| 1701 - 1704 |
Immobilization of cesium by crystalline zirconium phosphate
Itoh K, Nakayama S |
| 1705 - 1709 |
Brazing perovskite ceramics with silver/copper oxide braze alloys
Erskine KM, Meier AM, Pilgrim SM |
| 1711 - 1711 |
Structure and properties of glass-like carbon (vol 37, pg 1, 2002)
Pesin LA |
