| 2519 - 2534 |
Advanced titania nanostructures and composites for lithium ion battery
Su X, Wu QL, Zhan X, Wu J, Wei SY, Guo ZH |
| 2535 - 2540 |
Influence of crystallization time on microstructures and dielectric properties of tungsten-bronze glass-ceramics
Wang MJ, Liu XL, Wang XR, Zhang Y |
| 2541 - 2547 |
Microstructural evolution after creep in aluminum alloy 2618
Du ZW, Wang GJ, Han XL, Li ZH, Zhu BH, Fu X, Zhang YA, Xiong BQ |
| 2548 - 2558 |
High performance hybrids based on a novel incompletely condensed polyhedral oligomeric silsesquioxane and bismaleimide resin with improved thermal and dielectric properties
Zeng L, Liang GZ, Gu AJ, Yuan L, Zhuo DX, Hu JT |
| 2559 - 2572 |
Experimental and theoretical assessment of the inhibiting action of Aspilia africana extract on corrosion aluminium alloy AA3003 in hydrochloric acid
Mejeha IM, Nwandu MC, Okeoma KB, Nnanna LA, Chidiebere MA, Eze FC, Oguzie EE |
| 2573 - 2582 |
Investigating the vibration damping behavior of barium titanate (BaTiO3) ceramics for use as a high damping reinforcement in metal matrix composites
Asare TA, Poquette BD, Schultz JP, Kampe SL |
| 2583 - 2590 |
Characterization of granular silicon, powders, and agglomerates from a fluidized bed reactor
Zbib MB, Dahl MM, Sahaym U, Norton MG, Osborne EW, Bahr DF |
| 2591 - 2599 |
Optimization of tensile properties thermoplastic blends from soy and biodegradable polyesters: Taguchi design of experiments approach
Reddy MM, Mohanty AK, Misra M |
| 2600 - 2606 |
Effect of compatibility between europium complexes and styrene monomer on preparation of europium-encapsulated microspheres by dispersion polymerization
Wang LJ, Wang X, Wang TX, Hu ZJ, Zou G, Zhang QJ |
| 2607 - 2616 |
Mechanical properties of sodium and potassium activated metakaolin-based geopolymers
Lizcano M, Kim HS, Basu S, Radovic M |
| 2617 - 2623 |
Enhanced microwave dielectric properties of Ba0.40Sr0.60TiO3-Zr0.80Sn0.20TiO4 composite ceramics
Jiang HT, Zhai JW, Zhang MW, Yao X |
| 2624 - 2629 |
Effect of piezoelectric polarization on phonon group velocity in nitride wurtzites
Sahoo BK |
| 2630 - 2636 |
Structural disorder of ball-milled, nanosized, Fe-doped SnO2: X-ray diffraction and Mossbauer spectroscopy characterization
Ribeiro TS, Sasaki JM, Vasconcelos IF |
| 2637 - 2647 |
Effect of the chemical structure of aromatic polyimides on their thermal aging, relaxation behavior and mechanical properties
Ragosta G, Abbate M, Musto P, Scarinzi G |
| 2648 - 2657 |
Time and temperature dependent piezoresistance of carbon nanofiller/polymer composites under dynamic load
de la Vega A, Sumfleth J, Wittich H, Schulte K |
| 2658 - 2664 |
Sol-gel synthesis, structural and optical characteristics of Sr1-xZn2Si2yO7+delta: xEu(2+) as a potential nanocrystalline phosphor for near-ultraviolet white light-emitting diodes
Salimi R, Sameie H, Alvani AAS, Sarabi AA, Moztarzadeh F, Mohammadloo HE, Nargesian F, Tahriri M |
| 2665 - 2674 |
Fabrication of transparent polymer-matrix nanocomposites with enhanced mechanical properties from chemically modified ZrO2 nanoparticles
Cheema TA, Lichtner A, Weichert C, Bol M, Garnweitner G |
| 2675 - 2686 |
Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly(lactic acid)
Hossain KMZ, Ahmed I, Parsons AJ, Scotchford CA, Walker GS, Thielemans W, Rudd CD |
| 2687 - 2694 |
Effects of Nb2O5 addition on the microstructure, electrical, and mechanical properties of PZT/ZnO nanowhisker piezoelectric composites
Wang DW, Yuan J, Li HB, Lu R, Zhao QL, Zhang DQ, Cao MS |
| 2695 - 2699 |
Indentation strength method to determine the fracture toughness of La0.58Sr0.4Co0.2Fe0.8O3-delta and Ba0.5Sr0.5Co0.8Fe0.2O3-delta
Huang BX, Chanda A, Steinbrech RW, Malzbender J |
| 2700 - 2711 |
Hydroxyethylcellulose surface treatment of natural fibres: the new'twist' in yarn preparation and optimization for composites applicability
Shah DU, Schubel PJ, Licence P, Clifford MJ |
| 2712 - 2724 |
A partial least squares solution to the problem of multicollinearity when predicting the high temperature properties of 1Cr-1Mo-0.25V steel using parametric models
Evans M |
| 2725 - 2730 |
Influences of film composition and annealing on the mechanical and electrical properties of W-Mo thin films
Namazu T, Maruo N, Inoue S |
| 2731 - 2735 |
Direct electrochemical determination of ascorbic acid by a cobalt(II) tetra-neopentyloxy phthalocyanine-multi-walled carbon nanotubes glassy carbon electrode
Zuo X, Li N, Zhang H |
| 2736 - 2742 |
Investigation on sulphonated PEEK beads for drug delivery, bioactivity and tissue engineering applications
Sundar SS, Sangeetha D |
| 2743 - 2751 |
Tensile properties of high strength polyacrylonitrile (PAN)-based and high modulus pitch-based hybrid carbon fibers-reinforced epoxy matrix composite
Naito K, Yang JM, Kagawa Y |
| 2752 - 2756 |
Correlation between thermoluminescence and mechanoluminescence of gamma-ray-irradiated Dy-doped BaB4O7 phosphors
Mishra GC, Upadhyay AK, Dwiwedi SK, Dhoble SJ, Kher RS |
| 2757 - 2762 |
Facile fabrication of stable superhydrophobic films on aluminum substrates
Zhang X, Zhang PY, Wu ZS, Zhang ZJ |
| 2763 - 2769 |
Nanodomain and interface structure in epitaxial BaTiO3 thin films on MgO deposited by magnetron sputtering
He J, Jiang HQ, Jiang JC, Meletis EI |
| 2770 - 2781 |
A new statistical framework for the determination of safe creep life using the theta projection technique
Evans M |
| 2782 - 2797 |
Properties of inorganic polymer (geopolymer) mortars made of glass cullet
Cyr M, Idir R, Poinot T |
| 2798 - 2806 |
Corrosion behaviour of aluminium alloys in ethanol fuels
Kruger L, Tuchscheerer F, Mandel M, Muller S, Liebsch S |
| 2807 - 2817 |
A new method of preparing Ni/YSZ cermet materials
Drozdz-Ciesla E, Wyrwa J, Pyda W, Rekas M |
| 2818 - 2822 |
Optical interband transitions in [111] poled relaxor-based ferroelectric 0.24Pb(In1/2Nb1/2)O-3-(0.76-x)Pb(Mg1/3Nb2/3)O-3-xPbTiO(3) single crystal
Wu FM, Yang B, Sun EW, Wang Z, Yin YQ, Pei YB, Yang WL, Cao WW |
| 2823 - 2830 |
Effect of pass strain and temperature on recrystallisation in magnesium alloy AZ31 after interrupted cold deformation
Yang XY, Okabe Y, Miura H, Sakai T |
| 2831 - 2836 |
Effect of electrophoretically deposited carbon nanotubes on the interface of carbon fiber reinforced epoxy composite
Guo JH, Lu CX, An F |
| 2837 - 2844 |
Biomimetic formation of crystalline bone-like apatite layers on spongy materials templated by bile salts aggregates
Fernandez-Leyes M, Verdinelli V, Hassan N, Ruso JM, Pieroni O, Schulz PC, Messina P |
| 2845 - 2855 |
Influence of aggregate mineralogy on alkali-silica reaction studied by X-ray powder diffraction and imaging techniques
Marinoni N, Voltolini M, Mancini L, Cella F |
| 2856 - 2863 |
An alternative method to modify the sensitivity of p-type NiFe2O4 gas sensor
Sutka A, Stingaciu M, Mezinskis G, Lusis A |
| 2864 - 2874 |
Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites
Tan T, Santos SF, Savastano H, Soboyejo WO |
| 2875 - 2881 |
Physical properties of thermally evaporated silicon films nitrided at different rf plasma-processing time
Mohamed SH, Raaif M, El-Rahman AMA |
| 2882 - 2890 |
Carbon layer structures and thermal conductivity of graphitized carbon fibers
Wu GP, Li DH, Yang Y, Lu CX, Zhang SC, Li XT, Feng ZH, Li ZH |
| 2891 - 2898 |
Enhancing the adhesive wear performance of polyetherimide composites through nano-particle treatment of the carbon fabric
Tiwari S, Bijwe J, Panier S |
| 2899 - 2902 |
Preparation and microwave absorbing properties of SiC microtubes
Meng S, Guo XY, Jin GQ, Wang YY, Xie S |
| 2903 - 2909 |
UV-Visible spectroscopic study of ZnS nanostructures synthesized by a novel micellar method
Goswami N, Sen P |
| 2910 - 2914 |
Post-curing effect on magnetoelectric performance of single PZT rod/continuous Terfenol-D fiber/epoxy 1-1-3 composites
Lam KH, Lo CY, Chan HLW |
| 2915 - 2927 |
The effectiveness of coincidence site lattice criteria in predicting creep cavitation resistance
Otto F, Payton EJ, Frenzel J, Eggeler G |
| 2928 - 2931 |
Ag2O3 clathrate is a novel and effective antimicrobial agent
Ando S, Hioki T, Yamada T, Watanabe N, Higashitani A |
| 2932 - 2942 |
In-plane conduction of polymer composite plates reinforced with architectured networks of Copper fibres
Orgeas L, Dumont PJJ, Vassal JP, Guiraud O, Michaud V, Favier D |
| 2943 - 2950 |
Controlling the morphology of silica-carbonate biomorphs using proteins involved in biomineralization
Sanchez-Puig N, Guerra-Flores E, Lopez-Sanchez F, Juarez-Espinoza PA, Ruiz-Arellano R, Gonzalez-Munoz R, Arreguin-Espinosa R, Moreno A |
| 2951 - 2959 |
Prepolymerized organic-inorganic hybrid nanoparticles as fillers for light-cured methacrylate monomers
Mucci VL, Arenas GF, Perez CJ, Vallo CI |
| 2960 - 2965 |
Influence of different synthesizing steps on the multiferroic properties of Bi5Fe1Ti3O15 and Bi5Fe0.5Co0.5Ti3O15 ceramics
Mao XY, Wang W, Sun H, Lu YL, Chen XB |
| 2966 - 2974 |
Mechanical and microstructural analysis of 2205 duplex stainless steel under hot working condition
Momeni A, Dehghani K, Zhang XX |
| 2975 - 2984 |
Creep and microstructure in powder metallurgy 15 vol.% SiCp-2009 Al composite
Lin ZG, Mohamed FA |
| 2985 - 2994 |
Multiwalled carbon nanotubes-supported Nickel catalysts for the steam reforming of propane
Lopez E, Kim J, Shanmugharaj AM, Ryu SH |
