| 1067 - 1069 |
The enthalpy of formation of NiAl
Hu RX, Nash P |
| 1071 - 1077 |
Enhancement in thermoelectric power factor of M/T/N and M/Bi/M/Bi/M (M and N = Cu or Ni) composite devices welded with T = Bi or Bi0.88Sb0.12 alloy
Yamashita O, Odahara H, Satou K |
| 1079 - 1085 |
Preparation and characterization of epoxy-silica hybrid materials by the sol-gel process
Lu SR, Zhang HL, Zhao CX, Wang XY |
| 1087 - 1091 |
Metal-nonmetal transition and the electronic transport behavior in disordered PbO2-Ag2O-xC system synthesized by ball milling
Li D, Geng DY, Xing YT, Li WF, Qiao GW, Wang YZ, Zhang ZD |
| 1093 - 1100 |
Reactive wetting of rutile by liquid aluminium
Avraham S, Kaplan WD |
| 1101 - 1104 |
The mechanical properties of lettuce: A comparison of some agronomic and postharvest effects
Newman JM, Hilton HW, Clifford SC, Smith AC |
| 1105 - 1109 |
Water-soluble binder with high flexural modulus for powder injection molding
Song M, Park MS, Kim JK, Cho IB, Kim K, Sung HJ, Ahn S |
| 1111 - 1114 |
Photoluminescence enhancement of ZrO2/rhodamine B nanocomposites
Liu XL, Cui DL, Wang Q, Xu HY, Li M |
| 1115 - 1120 |
Influence of oxygen and post deposition annealing on the electrical properties of MnPc and MnPcCl Schottky barrier devices
Rajesh KR, Menon CS |
| 1121 - 1125 |
Template synthesis of highly ordered hydroxyapatite nanowire arrays
Yang Z, Huang Y, Chen ST, Zhao YQ, Li HL, Hu ZA |
| 1127 - 1134 |
Hydroxylapatite-zirconia composites: Thermal stability of phases and sinterability as related to the CaO-ZrO(2)phase diagram
Evis Z, Ergun C, Doremus RH |
| 1135 - 1139 |
The effect of homogenization on the recrystallization of an Al-Mn-Mg alloy sheet
Aghaie-Khafri M |
| 1141 - 1152 |
Effects of nematic polymer liquid crystal on crystallization and structure of PET/Vectra blends
Georgiev G, Cebe P, Capel M |
| 1153 - 1158 |
Effects of gallia additions on sintering behavior of Ce0.8Gd0.2O1.9 ceramics prepared by commercial powders
Lee JS, Choi KH, Ryu BK, Shin BC, Kim IS |
| 1159 - 1162 |
Preparation of highly oriented aluminum nitride thin films on molybdenum bottom electrodes using metal interlayers
Akiyama M, Ueno N, Tateyama H, Nagao K, Yamada T |
| 1163 - 1168 |
Synthesis of aniline-thiophene copolymer on beta-PbO2 electrode in acetonitrile
Abaci S, Aslan Y, Yildiz A |
| 1169 - 1175 |
Corrosion behavior of carbon implanted ZIRLO alloy in 1 M H2SO4
Peng DQ, Bai XD, Chen BS |
| 1177 - 1181 |
Relaxor ferroelectric behavior and structural evaluation in electron-irradiated P (vinylidene fluoride-trifluoroethylene) copolymer blends
Guo SS, Liu W, Zhu BL, Liu T, Zhao XZ, Chan HLW |
| 1183 - 1191 |
Research on the interaction of three contact fibers in the fiber suspensions
Lin JZ, Chai XH, Olsen J |
| 1193 - 1200 |
Formation of magnesium spinel in the presence of LiCl
Alvarez FH, Pasquevich DM, Bohe A |
| 1201 - 1208 |
Formation of porosity in ferritic ODS alloys on high temperature exposure
Turker M |
| 1209 - 1215 |
Glazing of alumina by a fluoroapatite-containing glass-ceramic
Verne E, Brovarone C, Moisescu C |
| 1217 - 1228 |
Crack growth in a new nickel-based superalloy at elevated temperature -Part I - Effects of loading waveform and frequency on crack growth
Dalby S, Tong J |
| 1229 - 1235 |
Crack growth in a new nickel-based superalloy at elevated temperature -Part II - Finite element analysis of crack growth
Zhao LG, Tong J |
| 1237 - 1243 |
Crack growth in a new nickel-based superalloy at elevated temperature -Part III - Characterisation
Tong J, Dalby S, Byrne J |
| 1247 - 1249 |
Elastic constants determination for Fe3+ substituted YIG through infra-red spectroscopy and heterogeneous metal mixture rule
Modi KB, Chhantbar MC, Sharma PU, Joshi HH |
| 1251 - 1253 |
Photocatalytic activity TiO2 granular films prepared by layer-by-layer self-assembly method
Hao WC, Pan F, Wang TM |
| 1255 - 1257 |
Effect of Mg addition on the self-propagating high temperature synthesis reaction in Al-Ti-C system
Wang HY, Zhao F, Jiang QC, Wang Y, Ma BX |
| 1259 - 1263 |
Comparisons of thermal properties between inorganic filler and acid-treated multiwall nanotube/polymer composites
Lee GW, Lee JI, Lee SS, Park M, Kim J |
| 1265 - 1267 |
Influence of cobalt oxide addition on electrical properties of ZnO-Pr6O11-based varistor ceramics
Nahm CW |
| 1269 - 1272 |
Fracture initiation revealed by variations in the fatigue fracture morphologies of PA 66 and PET fibers
Ramirez JM, Bunsell AB |
| 1273 - 1275 |
Effect of dielectric constant of solvent on the conductivity behavior of polymer gel electrolytes
Kumar R, Singh B, Sekhon S |
| 1277 - 1279 |
Structural and vibrational properties of BaxSr1-xTiO3 nanoparticles
Lee CT, Zhang MS, Yin Z, Zhu W |
| 1281 - 1283 |
Effect of microfissures on mechanical properties of 308L austenitic stainless steel weld metals
Cui Y, Lundin CD |
| 1285 - 1287 |
Study of mesophase pitch-based graphite foam used as anodic materials in lithium ion rechargeable batteries
Yang J, Shen ZM, Xue RS, Hao ZB |
| 1289 - 1292 |
Size driven phase transition of barium titanate nanoparticles prepared by plasma chemical vapor deposition
Suzuki K, Kijima K |
| 1293 - 1295 |
Novel solid-cored carbon nanofiber grown on steels substrates in ethanol flames
Pan CX, Liu YL, Cao F |
| 1297 - 1299 |
Study on mechanical property of epoxy composite filled with nano-sized calcium carbonate particles
Li L, Zou HK, Shao L, Wang GQ, Chen JF |
| 1301 - 1303 |
Pore-size control in the sol-gel synthesis of mesoporous silicon carbide
Guo XY, Jin GQ |
| 1305 - 1307 |
Synthesis of cubic fluorite CeO2 nanowires
Yang R, Guo L |
| 1309 - 1311 |
Effects of organic acids on sol-gel transition of silicic acid - A rheological study
Naskar MK |
| 1313 - 1315 |
Effect of annealing temperature on tensile behavior of 5052 Al alloy deformed at cryogenic temperature
Lee YB, Shin DH, Nam WJ |
| 1317 - 1319 |
Structure and electrical properties of SrCoO3-delta doped by CeO2
Wei QT, Guo RS, Wang FH, Li HL |
