| 2797 - 2813 |
A review on Luffa fibres and their polymer composites
Adeyanju CA, Ogunniyi S, Ighalo JO, Adeniyi AG, Abdulkareem SA |
| 2814 - 2837 |
Review of long wavelength luminescent carbon-based nanomaterials: preparation, biomedical application and future challenges
Huo F, Li WQ, Liu YH, Liu XH, Lee CY, Zhang W |
| 2838 - 2855 |
Recent advances in high-figure-of-merit semiconductor and organic materials for all-optical switching applications
Sharma R, Singh M, Kaur H |
| 2856 - 2878 |
Hydrogen production from ammonia borane hydrolysis catalyzed by non-noble metal-based materials: a review
Wang CY, Zhao JL, Du XH, Sun S, Yu XF, Zhang XH, Lu ZM, Li LL, Yang XJ |
| 2879 - 2886 |
In situ electron-doping of MoS2 thin films by embedded MoOxSy particles during chemical vapor deposition
Kang M, Lee J, Choi W |
| 2887 - 2899 |
Influence of yttria-stabilized zirconia content on rheological behavior and mechanical properties of zirconia-toughened alumina fabricated by paste-based stereolithography
Li MS, Liu WW, Nie JB, Wang CY, Li WL, Xing ZW |
| 2900 - 2911 |
Dynamic fragmentation of a Zr-based metallic glass under various impact velocities
Wang CT, He Y, Ji C, He Y, Guo L, Meng YP |
| 2912 - 2943 |
Carbon materials with high pentagon density
Diana N, Yamada Y, Gohda S, Ono H, Kubo S, Sato S |
| 2944 - 2960 |
Carbonization of phloroglucinol promoted by heteropoly acids
Gohda S, Saito M, Yamada Y, Kanazawa S, Ono H, Sato S |
| 2961 - 2978 |
Highly stable superamphiphobic material with ethanol-triggered switchable wettability for high-efficiency on-demand oil-water separation
Qu MN, Liu LL, Liu Q, Li JH, Yang C, Yang X, Li KS, Liu XR, He JM |
| 2979 - 2993 |
Effect of ligands of functional magnetic MOF-199 composite on thiophene removal from model oil
Chen MY, Wang ZY, Liu YC, Chen J, Liu J, Gan D |
| 2994 - 3010 |
Facile microwave-assisted fabrication of CdS/BiOCl nanostructures with enhanced visible-light-driven photocatalytic activity
Deng CH, Hu HM, Yu H, Xu JJ, Ci MY, Wu YP, Wang LL, Zhu SN |
| 3011 - 3023 |
Branched nanosheets-interlaced structure of Co2+/Co3+-doped Ni(OH)(2) originating from Ni-3(NO3)(2)(OH)(4) template with significantly boosted electrochemical performance
Wang J, Li J, Liu YY, Wang MR, Cui HT |
| 3024 - 3034 |
CO2 adsorption by polyamine-based protic ionic liquid-functionalized mesoporous silica: regenerability and influence of flue gas contaminants
Zhang W, Li Y, Li YN, Gao EH, Cao GH, Bernards MT, He Y, Shi Y |
| 3035 - 3048 |
Enhanced nonlinear absorption and efficient optical limiting action of a few 1,3,4-oxadiazole-based donor-acceptor systems
Remya TM, Shiju E, Shandev PP, Chandrasekharan K, Haridas S, Unnikrishnan PA |
| 3049 - 3061 |
Covering soy polysaccharides gel on the surface of beta-cyclodextrin-based metal-organic frameworks
Wang SN, Shao GQ, Zhao HK, Yang LN, Zhu LJ, Liu H, Cui B, Zhu DS, Li J, He YT |
| 3062 - 3077 |
Enhancing mechanical properties of pure copper-based materials with CrxOy nanoparticles and CNT hybrid reinforcement
Chen XY, Bao R, Yi JH, Fang D, Tao JM, Li FX |
| 3078 - 3094 |
Studies on de-icing and anti-icing of carbon fiber-reinforced composites for aircraft surfaces using commercial multifunctional permanent superhydrophobic coatings
Khadak A, Subeshan B, Asmatulu R |
| 3095 - 3110 |
Water diffusivity transition in fumed silica-filled polydimethylsiloxane composite: Correlation with the interfacial free volumes characterized by positron annihilation lifetime spectroscopy
Wang Z, Yang Y, Peng XY, Huang Z, Qian LB, He CQ, Fang PF |
| 3111 - 3126 |
Facile fabrication of compressible, magnetic and superhydrophobic poly(DVB-MMA) sponge for high-efficiency oil-water separation
Yu CM, Jiang JE, Liu YY, Liu K, Situ ZQ, Tian LF, Luo WJ, Hong PZ, Li Y |
| 3127 - 3139 |
Photocatalytic MOF fibrous membranes for cyclic adsorption and degradation of dyes
Huang JM, Huang D, Zeng FB, Ma L, Wang ZB |
| 3140 - 3154 |
High-flux oil-water separation with superhydrophilicity and underwater superoleophobicity ZIF-67@Cu(OH)(2) nanowire membrane
He JM, Li JH, Ma LL, Pang YJ, Liu LL, Liu Q, Peng L, Qu MN |
| 3155 - 3167 |
Unique 3D interpenetrating capillary network of wood veneer for highly efficient cross flow filtration
Zhu X, Hu JB, Liu GG, Xu DN, Wei Y, Li DH, Chang SS, Li XJ, Liu Y |
| 3168 - 3182 |
Dynamics and thermodynamics of core/shell formation of icosahedral NimAgn bimetallic nanostructures
Hewage J |
| 3183 - 3196 |
Stable and metastable structures and their energetics of asymmetric tilt grain boundaries in MgO: a simulated annealing approach
Yokoi T, Kondo Y, Ikawa K, Nakamura A, Matsunaga K |
| 3197 - 3209 |
Influence of fast neutron irradiation on the phase composition and optical properties of homogeneous SiOx and composite Si-SiOx thin films
Nesheva D, Fogarassy Z, Fabian M, Hristova-Vasileva T, Sulyok A, Bineva I, Valcheva E, Antonova K, Petrik P |
| 3210 - 3219 |
Adjusting transmissivity based on grapheme-h-BN-graphene heterostructure as a tunable phonon-plasmon coupling system in mid-infrared band
Cai M, Wang SL, Liu ZH, Wang YD, Gao B, Han T, Liu HX, Zhang HF, Qiao YB |
| 3220 - 3229 |
Wafer-scale epitaxial single-crystalline Ni(111) films on sapphires for graphene growth
Hu YG, Peng JP, Pan MC, Qiu WC, Wu RN, Hu JF, Hu N, Cheng FY, Huang R, Li FS, Chen DX, Zhang Q, Li PS |
| 3230 - 3245 |
A novel low-concentration isopropanol gas sensor based on Fe-doped ZnO nanoneedles and its gas sensing mechanism
Luo YF, Ly A, Lahem D, Zhang C, Debliquy M |
| 3246 - 3255 |
Self-assembly of alpha-MnO2/Mn3O4 hierarchical structure on carbon cloth for aymmetric supercapacitors
Jia JC, Lian X, Wu MZ, Zheng FC, Gao YH, Niu HL |
| 3256 - 3267 |
Impedance spectroscopy of short multiwalled carbon nanotube networks deposited on a paper substrate: tracking the evolution of in-plane and thru-plane electronic properties
Muhlbauer RL, Gerhardt RA |
| 3268 - 3279 |
Green route to Prussian blue nanoparticles with high degradation efficiency of RhB under visible light
Yang J, Huang Z, Yang BD, Lin H, Qin LZ, Nie M, Li Q |
| 3280 - 3295 |
Nickel foam-supported starfish-like Ni(OH)(2)@CoS nanostructure with obvious core-shell heterogeneous interfaces for hybrid supercapacitors application
Yang YY, Zhu H, Meng HX, Ma WX, Wang CJ, Ma FQ, Hu ZG |
| 3296 - 3311 |
Active-screen plasma multi-functionalization of graphene oxide for supercapacitor application
Jing ZY, Qi SJ, Tao X, Yu HL, Zhang W, Qiao YL, Li XY, Dong HS |
| 3312 - 3324 |
Monomer self-deposition synthesis of N-doped mesoporous carbon tubes using halloysite as template for supercapacitors
Liu BB, Wang L, Zhang Y, Du J, Chen AB |
| 3325 - 3335 |
A high-performance pseudocapacitive electrode based on CuO-MnO2 composite in redox-mediated electrolyte
Mandal M, Nagaraj R, Chattopadhyay K, Chakraborty M, Chatterjee S, Ghosh D, Bhattacharya SK |
| 3336 - 3345 |
Development and evaluation of nanostructured palladium thin film prepared by dealloying using dilute citric acid for hydrogen gas sensing application
Ube T, Hasegawa S, Horie T, Ishiguro T |
| 3346 - 3353 |
A novel phosphatizing strategy to engineering CoO/Co1.94P@carbon polyhedron heterostructures for enhanced lithium-ion battery
Chen Z, Li HB |
| 3354 - 3363 |
A green and simple method for energy storage and conversion application
Sun ZX, Li KB, Koh SW, Jiao LS |
| 3364 - 3374 |
Nitrogen-rich microporous carbon framework as an efficient polysulfide host for lithium-sulfur batteries
Zhang XY, Zhou HY, Wang JG |
| 3375 - 3386 |
Assembling flower-on-sheet CoP-NiCoP nanohybrids as efficient self-supported electrocatalysts for hydrogen evolution reaction in both acidic and alkaline media
Lin YQ, Wang PC, Loh A, Wan L, Habib U, Xu Z, Li XH, Wang BG |
| 3387 - 3403 |
Bioceramic powders for bone regeneration modified by high-pressure CO2 process
Aubry C, Camy S, Combes C, Marsan O, Canceill T, Cazalbou S |
| 3404 - 3413 |
A new insight into formation of 3D porous biomaterials
Liu YP, Wang YC, Zhang MN, Qi ZY, Zeng J, Tian N, Li Q |
| 3414 - 3429 |
A dual-template defective 3DOMM-TiO2-x for enhanced non-enzymatic electrochemical glucose determination
Li Q, Chen L, Guo CY, Liu X, Han DZ, Wang WT |
| 3430 - 3443 |
The thermodynamic reassessment of the binary Al-Cu system
Kroupa A, Zobac O, Richter KW |
| 3444 - 3454 |
Joining of SiO(2)glass and 316L stainless steel using Bi-Ag-based active solders
Weber F, Rettenmayr M |
| 3455 - 3471 |
Thermodynamics and solidification kinetics of Ag-Ni-Co immiscible alloys
Deng CK, Jiang HX, Zhao JZ, Zhang LL, He J |
| 3472 - 3487 |
Influence of Cu/Mg ratio on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys
Wei SL, Wang RC, Zhang H, Xu CT, Wu Y, Feng Y |
| 3488 - 3497 |
On the temperature-dependent diffusion growth of phi-Mg5Al2Zn2 ternary intermetallic compound in the Mg-Al-Zn system
Cheng KM, Sun JX, Xu HX, Wang J, Zhou JX, Tang SQ, Wang XT, Zhang LJ, Du Y |
| 3498 - 3509 |
Investigating defect evolution during thermal treatment in Ni-Cr alloy using positron annihilation spectroscopy
Maheshwari P, Keskar N, Sudarshan K, Manikrishna KV, Krishnan M, Pujari PK |
| 3510 - 3524 |
Destruction of few fluorides to passive film of Ti-6Al-4V alloy under oxygen deficiency crevice conditions
Zhao PP, Song YW, Shi LJ, Dong KH, Shan DY, Han EH |
| 3525 - 3534 |
Temperature-dependent wetting characteristics of micro-nano-structured metal surface formed by femtosecond laser
Liu ZY, Pan N, Tao HY, Lin JQ |
| 3535 - 3550 |
Effect of route B-C-ECAP on microstructural evolution and mechanical properties of Al-Si-Cu alloy
Damavandi E, Nourouzi S, Rabiee SM, Jamaati R, Szpunar JA |
| 3551 - 3561 |
Oxidation resistance properties of refractory high-entropy alloys with varied AlxCrTiMo content
Zhang RY, Meng JH, Han JS, Tulugan K, Zhang R |
| 3562 - 3575 |
Non-isothermal crystallization kinetics of polypropylene/polytetrafluoroethylene fibrillated composites
Qiao YH, Jalali A, Yang JN, Chen YG, Wang SW, Jiang YC, Hou JH, Jiang J, Li Q, Park CB |
| 3576 - 3588 |
A silsesquioxane-based flexible polyimide aerogel with high hydrophobicity and good adsorption for liquid pollutants in wastewater
Wu YM, Qiu H, Sun JW, Wang YP, Gao CH, Liu YT |
| 3589 - 3599 |
Interfacial adhesion of a grafted polymer on a cellulose surface: a first-principles study
Uetsuji Y, Higuchi S, Murayama K, Aoki K |
| 3600 - 3611 |
Chitin-clay composite gels with enhanced thermal stability prepared in a green and facile approach
Zhang Z, Lucia LA |
| 3612 - 3622 |
Cathodic exfoliation of graphite into graphene nanoplatelets in aqueous solution of alkali metal salts
Dalal MH, Lee CY, Wallace GG |
| 3623 - 3637 |
Thermally resistant and strong remoldable triple-shape memory thermosets based on bismaleimide with transesterification
Ning LJ, Yuan L, Liang GZ, Gu AJ |
