| 2637 - 2642 |
Tributylamine as corrosion inhibitor for mild steel in hydrochloric acid
Bastidas JM, Polo JL, Cano E, Torres CL |
| 2643 - 2651 |
Application of infrared imaging to the study of controlled failure of thermal barrier coatings
Ferber MK, Wereszczak AA, Lance M, Haynes JA, Antelo MA |
| 2653 - 2657 |
An investigation of pitting initiation mechanism of 1Cr12Ni2W1Mo1V steel after induction hardening
Dong J, Zhou JG, Wang H, Ling JT, Shi LF |
| 2659 - 2674 |
Correlation of fatigue and creep slow crack growth in a medium density polyethylene pipe material
Parsons M, Stepanov EV, Hiltner A, Baer E |
| 2675 - 2681 |
Subtle changes in magnetic Barkhausen noise before the macroscopic elastic limit
Stefanita CG, Clapham L, Atherton DL |
| 2683 - 2688 |
Synthesis by a soft chemistry route and characterization of LixNi1-xO (0 < x < 0.5) compounds: Behavior in molten carbonates
Belhomme C, Cassir M, Devynck J, Gregoire G |
| 2689 - 2693 |
Preparation and characterization of superhard TiC/Mo multilayers
Wang J, Li WZ, Li HD |
| 2695 - 2699 |
Microstructural influence on the R-curve behavior of a 70%Si3N4-30% barium aluminum silicate self-reinforced composite
Fang Y, Yu F, White KW |
| 2701 - 2710 |
The solid state chemistry of metakaolin-blended ordinary Portland cement
Coleman NJ, McWhinnie WR |
| 2711 - 2718 |
The effect of layer number on the superplasticity of laminate 7475/2091 Al alloy
Sha G, Cui JZ |
| 2719 - 2727 |
Comparison of tensile properties in the pre-yield region of metallocene-catalyzed and Ziegler-Natta-catalyzed linear polyethylenes
Nitta K, Suzuki K, Tanaka A |
| 2729 - 2734 |
Spinodal decomposition of fine-grained binary alloys: A Monte-Carlo simulation
Liu JM, Lim LC, Wu ZC, Cao GH, Chen G, Liu ZG |
| 2735 - 2741 |
An investigation of shelf-life of strontium doped LaMnO3 materials
Jiang SP, Zhang JP, Ramprakash Y, Milosevic D, Wilshier K |
| 2743 - 2748 |
Hydrolysis behavior of aluminum nitride in various solutions
Fukumoto S, Hookabe T, Tsubakino H |
| 2749 - 2756 |
Effect of halogen purification and heat treatment on thermal conductivity of high porosity carbon/carbon composite thermal insulation
Baxter RI, Iwashita N, Sawada Y |
| 2757 - 2761 |
Divorced eutectic and interface characteristics in a solidified YAG-spinel composite with spinel-rich composition
Wang S, Akatsu T, Tanabe Y, Yasuda E |
| 2763 - 2767 |
Influence of solution composition on the formation of SiO2/LaF3 composites in the sol-gel process
Fujihara S, Kato T, Kimura T |
| 2769 - 2777 |
Effect of soft substrate on the indentation damage in silicon carbide deposited on graphite
Lee KS, Park JY, Kim WJ, Lee MY, Jung CH, Hong GW |
| 2779 - 2784 |
High-strain-rate superplastic deformation behavior of a powder metallurgy-processed 2124 Al alloy
Kim WJ, Hong SH |
| 2785 - 2789 |
Concrete failure due to air-water jet impingement
Momber AW |
| 2791 - 2797 |
Sol-gel derived hydroxyapatite coatings on titanium substrate
Montenero A, Gnappi G, Ferrari F, Cesari M, Salvioli E, Mattogno L, Kaciulis S, Fini M |
| 2799 - 2806 |
Some peculiarities of fracture of nanocrystalline nitride and boride films
Andrievski RA, Kalinnikov GV, Jauberteau J, Bates J |
| 2807 - 2814 |
Alumina-mullite-zirconia composites obtained by reaction sintering: Part I. Microstructure and mechanical behaviour
Mazzei AC, Rodrigues JA |
| 2815 - 2824 |
Alumina-mullite-zirconia composites obtained by reaction sintering - Part II. R-Curve behavior
Mazzei AC, Rodrigues JA, Pandolfelli VC |
| 2825 - 2828 |
An inverse gas chromatographic study of the adsorption of alkanes on hydroxyapatite
Smiciklas ID, Milonjic SK, Zec S |
| 2829 - 2832 |
Studies of the effect of paramagnetic impurity in the structure of sodium disilicate glass
Mortuza MG, Dupree R, Holland D |
| 2833 - 2839 |
Direct synthesis of potassium tantalate thin films by hydrothermal-electrochemical method
Wu ZB, Tsukada T, Yoshimura M |
| 2841 - 2845 |
Ion transport and electrochemical cell characteristic studies of a new (PVP+NaNO3) polymer electrolyte system
Reddy MJ, Sreekanth T, Chandrashekar M, Rao UVS |
| 2847 - 2854 |
TEM study of the interface between HIPed silicon nitride and encapsulation borosilicate glass
Westman AK, Wei LY |
| 2855 - 2867 |
Predictive modelling of the properties and toughness of polymeric materials - Part I Why is polystyrene brittle and polycarbonate tough ?
Smit RJM, Brekelmans WAM, Meijer HEH |
| 2869 - 2879 |
Predictive modelling of the properties and toughness of polymeric materials - Part II - Effect of microstructural properties on the macroscopic response of rubber-modified polymers
Smit RJM, Brekelmans WAM, Meijer HEH |
| 2881 - 2892 |
Predictive modelling of the properties and toughness of polymeric materials - Part III - Simultaneous prediction of micro- and macrostructural deformation of rubber-modified polymers
Smit RJM, Brekelmans WAM, Meijer HEH |
| 2893 - 2896 |
Synthesis and characterization of the Indium-doped Tl-1223 phase
Abou-Aly AI, Ibrahim IH, Awad R |
| 2897 - 2905 |
Nano-structured intermetallic compound TiAl obtained by crystallization of mechanically alloyed amorphous TiAl, and its subsequent grain growth
Kambara M, Uenishi K, Kobayashi KF |
