| 2725 - 2733 |
The hot compaction of woven polypropylene tapes
Hine PJ, Ward IM, Teckoe J |
| 2735 - 2743 |
Densification of a rapidly solidified nickel aluminide powder-I application of hot-isostatic pressing diagrams
Duszczyk J, Zhuang LZ, Buekenhout L |
| 2745 - 2750 |
Monitoring local strains in cracked cross-ply composites using an embedded aramid fibre strain sensor
Arjyal BP, Galiotis C, Ogin SL, Whattingham RD |
| 2751 - 2762 |
Fatigue properties of jointed wood composites part I -Statistical analysis, fatigue master curves and constant life diagrams
Bond IP, Ansell MP |
| 2763 - 2770 |
Cutting cheese with wire
Kamyab I, Chakrabarti S, Williams JG |
| 2771 - 2779 |
Effects of heat treatments on the ductility of cobalt electrodeposits
Dille J, Charlier J, Winand R |
| 2781 - 2794 |
The nature of localized deformation in 6111-T6 aluminium alloy and polycarbonate
Tata MM, Oh JS, Lee D |
| 2795 - 2803 |
Chemistry of removal of ethylene vinyl acetate binders
Hrdina KE, Halloran JW, Oliveira A, Kaviany M |
| 2805 - 2815 |
Dimensional changes during binder removal in a mouldable ceramic system
Hrdina KE, Halloran JW |
| 2817 - 2823 |
Enhancement of the ionic conductivity of poly(ethylene oxide) electrolyte film by polyaniline addition
Yano J, Koga T, Yamasaki S |
| 2825 - 2830 |
Spatial-OH impurity distribution in gallium phosphate crystals
Marinho E, Palmier D, Goiffon A, Philippot E |
| 2831 - 2836 |
Effects of pre-cracking methods on fracture behaviour of an Araldite-F epoxy and its rubber-modified systems
Xiao KQ, Ye L, Kwok YS |
| 2837 - 2843 |
Al2O3 and Al2O3-TiN wear resistance in a simulated biological environment
Begin-Colin S, Mocellin A, Von Stebut J, Bordji K, Mainard D |
| 2845 - 2850 |
A temperature-dependent Mossbauer study of mechanically activated and non-activated zinc ferrite
Sepelak V, Wissmann S, Becker KD |
| 2851 - 2855 |
Preparation of fatigue-free SrBi2Ta2O9 thin firms by rf magnetron sputtering and their ferroelectric properties
Yang CH, Park SS, Yoon SG |
| 2857 - 2868 |
Structure development in PET/PA6 microfibrillar-reinforced composites as revealed by microhardness
Krumova M, Fakirov S, Calleja FJB, Evstatiev M |
| 2869 - 2874 |
Structure and strength of AlN/V bonding interfaces
El-Sayed MH, Naka M |
| 2875 - 2882 |
Effects of alloying elements on hardness improvement and damping capacity of low thermal expansion cast irons
Moon BM, Hong CP |
| 2883 - 2888 |
Hybrid nanocomposites based on polystyrene and a reactive organophilic clay
Laus M, Camerani M, Lelli M, Sparnacci K, Sandrolini F, Francescangeli O |
| 2889 - 2892 |
Slip casting of sialon for pressureless sintering
Tsudo H, Sashida N, Yamakawa T, Miyata N |
| 2893 - 2897 |
Electrically conductive tungsten silicide coatings for EMI/RFI shielding of optically transparent windows
Savrun E, Del Aguila H |
| 2899 - 2904 |
Influence of ultrasonic cavitation on surface residual stresses in AISI 304 stainless steel
Sriraman MR, Vasudevan R |
| 2905 - 2917 |
Water induced anelasticity of porous media
Lepage J, Menaucourt J |
| 2919 - 2925 |
Material properties of CuInSe2 prepared by H2Se treatment of CuIn alloys
Alberts V, Swanepoel R, Witcomb MJ |
| 2927 - 2930 |
The formation of reverted austenite in 18% Ni 350 grade maraging steel
Farooque M, Ayub H, Haq AU, Khan AO |
| 2931 - 2935 |
Dependence of the rheological behaviour of electrostatically stabilized alumina slurries on pH and solid loading
Kim DJ, Kim H, Lee JK |
| 2937 - 2947 |
Phenomenology of the size effect in hardness tests with a blunt pyramidal indenter
Atkinson M |
| 2949 - 2953 |
Fractal characterization of the fracture surface of a high-strength low-alloy steel
Hsiung JC, Chou YT |
| 2955 - 2959 |
Electrical properties of poly(n-butylamino) (di-allylamino) phosphazene
Kimura T, Kajiwara M |
| 2961 - 2964 |
Solid state compatibilities in CaO-CaO.Al2O3-CaSO4-CaF2 system
Gimenez-Molina S, Blanco-Varela MT |
| 2965 - 2973 |
Finite element study of the fibre-matrix interface behaviour of [10 degrees/90 degrees] laminated composites under tensile loading
Mahfuz H, Mian AKMA, Vaidya U, Brown T, Jeelani S |
