377 - 387 |
Application of a constrained regularization method to extraction of affinity distributions: Proton and metal binding to humic substances Orsetti S, Andrade EM, Molina FV |
388 - 392 |
Bi-layer formation of imidazole-modified ethyl(hydroxyethyl)cellulose at a hydrophobic surface as monitored by QCM-D Hedin J, Isaksson D, Andersson M, Nyden M |
393 - 397 |
Preparation of gamma-APS monolayer with complete coverage via contact printing Basarir F, Yoon TH |
398 - 405 |
Organofunctionalized kenyaite for dye removal from aqueous solution Royer B, Cardoso NF, Lima EC, Ruiz VSO, Macedo TR, Airoldi C |
406 - 411 |
Adsorption of arsenic(III) and arsenic(V) by cupric oxide nanoparticles Martinson CA, Reddy KJ |
412 - 422 |
Goethite surface reactivity: II. A microscopic site-density model that describes its surface area-normalized variability Villalobos M, Cheney MA, Alcaraz-Cienfuegos J |
423 - 430 |
Adsorption and volumetric properties of Triton X-100 and propanol mixtures Zdziennicka A |
431 - 437 |
Nanoindentation study of interphases in epoxy/amine thermosetting systems modified with thermoplastics Ramos JA, Blanco M, Zalakain I, Mondragon I |
438 - 442 |
Preparation and characterization of TiO2 fiber with a facile polyorganotitanium precursor method Zhu LY, Yu G, Wang XQ, Xu D |
443 - 448 |
Role of water on PMMA/clay nanocomposites synthesized by in situ polymerization in ethanol and supercritical carbon dioxide Hossain MD, Kim WS, Hwang HS, Lim KT |
449 - 454 |
Structure changes in micelles and adsorbed layers during surfactant polymerization Chatjaroenporn K, Baker RW, FitzGerald PA, Warr GG |
455 - 461 |
New fluorinated montmorillonites for the preparation of UV-cured coatings Di Gianni A, Bongiovanni R, Conzatti L, Turri S |
462 - 469 |
Synthesis of amphiphilic dendrons and their interactions in aqueous solutions with cetyltrimethylammonium p-toluenesulfonate (CTAT) Calderon M, Velasco MI, Strumia MC, Lorenzo AT, Muller AJ, Rojas MR, Saez AE |
470 - 476 |
Electric-field-induced layer-by-layer fabrication of inorganic-organic hybrid second-order nonlinear optical films Wang SW, Zhao LS, Zhang XL, Shi ZS, Cu ZC, Yang YQ |
477 - 484 |
Comparative studies on the self-assembling behaviors of cationic and catanionic surfactant-like peptides Qiu F, Chen YZ, Zhao XJ |
485 - 496 |
Kinetics of adsorption of whey proteins and hydroxypropyl-methyl-cellulose mixtures at the air-water interface Perez OE, Sanchez CC, Pilosof AMR, Patino JMR |
497 - 503 |
Titanium modified with layer-by-layer sol-gel tantalum oxide and an organodiphosphonic acid: A coating for hydroxyapatite growth Arnould C, Volcke C, Lamarque C, Thiry PA, Delhalle J, Mekhalif Z |
504 - 509 |
Controllable synthesis and cell-imaging studies on CdTe quantum dots together capped by glutathione and thioglycolic acid Tian JN, Liu RJ, Zhao YC, Xu Q, Zhao SL |
510 - 518 |
Cell toxicity of superparamagnetic iron oxide nanoparticles Mahmoudi M, Simchi A, Milani AS, Stroeve P |
519 - 525 |
Effects of encapsulation elasticity on the stability of an encapsulated microbubble Katiyar A, Sarkar K, Jain P |
526 - 532 |
Effective adsorption and separation of lysozyme with PAA-modified Fe3O4@silica core/shell microspheres Shao DD, Xu KK, Song XJ, Hu JH, Yang WL, Wang CC |
533 - 543 |
Influence of polymer charge on the shear yield stress of silica aggregated with adsorbed cationic polymers Zhou Y, Yu H, Wanless EJ, Jameson GJ, Franks GV |
544 - 550 |
Preparation of raspberry-like polymer/silica nanocomposite microspheres via emulsifier-free polymerization in water/acetone media Zhang YH, Zou QC, Shu XW, Tang QQ, Chen M, Wu LM |
551 - 564 |
Discrete bivariate population balance modelling of heteroaggregation processes Rollie S, Briesen H, Sundmacher K |
565 - 574 |
A new instrument for time-resolved static and dynamic light-scattering experiments in turbid media Moitzi C, Vavrin R, Bhat SK, Stradner A, Schurtenberger P |
575 - 583 |
The effect of hydrogen bonding on the solvent-mediated interaction of composite plates Djikaev YS, Ruckenstein E |
584 - 591 |
Silica nanoparticle sols. Part 3: Monitoring the state of agglomeration at the air/water interface using the Langmuir-Blodgett technique Blute I, Pugh RJ, van de Pas J, Callaghan I |
592 - 598 |
Preparation of graphite nanoplatelets and graphene sheets Geng Y, Wang SJ, Kim JK |
599 - 606 |
Adsorption of polyamine on clay minerals Blachier C, Michot L, Bihannic I, Barres O, Jacquet A, Mosquet M |
607 - 611 |
Characterization of colloidal crystal film of polystyrene particles at the air-suspension interface Imura Y, Nakazawa H, Matsushita E, Morita C, Kondo T, Kawai T |
612 - 615 |
In situ USAXS measurements of titania colloidal paint films during the drying process Ingham B, Dickie S, Nanjo H, Toney MF |
616 - 623 |
Observation of gaseous films at solid-liquid interfaces: Removal by ultrasonic action Zbik MS, Du JH, Pushkarova RA, Smart RSC |
624 - 633 |
Effect of the length of the side chains of comb-like copolymer dispersants on dispersion and rheological properties of concentrated cement suspensions Ran QP, Somasundaran P, Miao CW, Liu JP, Wu SS, Shen J |
634 - 641 |
Manufacture of chitosan microbeads using centrifugally driven flow of gel-forming solutions through a polymeric micronozzle Mark D, Haeberle S, Zengerle R, Ducree J, Vladisavljevic GT |
642 - 647 |
On equilibrium solutions of aggregation-fragmentation problems Vigil RD |
648 - 653 |
Adsorption changes of cyclohexyl isothiocyanate on gold surfaces Kang H, Noh J, Ganbold EO, Uuriintuya D, Gong MS, Oh JJ, Joo SW |
654 - 657 |
Preparation and characterization of carbon-supported Pt-Au cathode catalysts for oxygen reduction reaction Liu CW, Wei YC, Wang KW |
658 - 666 |
Catalytic coatings on steel for low-temperature propane prereforming to solid oxide fuel cell (SOFC) application Alphonse P, Ansart F |
667 - 674 |
Surfactant concentration dependence of structure and photocatalytic properties of zinc oxide rods prepared using chemical synthesis in aqueous solutions Usui H |
675 - 678 |
Polyethylene glycol-stabilized platinum nanoparticles: The efficient and recyclable catalysts for selective hydrogenation of o-chloronitrobenzene to o-chloroaniline Cheng HY, Xi CY, Meng XC, Hao YF, Yu YC, Zhao FY |
679 - 690 |
Small-angle X-ray scattering studies of adsorption in Vycor glass Mitropoulos AC |
691 - 697 |
Synthesis, structure and properties of cross-linked R(SiO1.5)/SiO2 (R=3-glycidoxypropyl) porous organic inorganic hybrid networks dried at ambient pressure Shajesh P, Smitha S, Aravind PR, Warrier KGK |
698 - 706 |
Infiltration time and imprint shape of a sessile droplet imbibing porous medium Markicevic B, Li H, Sikorski Y, Zand AR, Sanders M, Navaz HK |
707 - 711 |
Direct synthesis of Ti-containing SBA-16-type mesoporous material by the evaporation-induced self-assembly method and its catalytic performance for oxidative desulfurization Shah AT, Li BS, Abdalla ZEA |
712 - 722 |
Influence of the activating agent and the inert gas (type and flow) used in an activation process for the porosity development of carbon nanofibers Jimenez V, Sanchez P, Valverde JL, Romero A |
723 - 729 |
Macroporous silicon templated from silicon nanocrystallite and functionalized Si-H reactive group for grafting organic monolayer Guo DJ, Wang J, Tan W, Xiao SJ, Dai ZD |
730 - 737 |
Analysis of cement-bonded materials by multi-cycle mercury intrusion and nitrogen sorption Kaufmann J, Loser R, Leemann A |
738 - 742 |
Interfacial properties of methane/aqueous VC-713 solution under hydrate formation conditions Peng BZ, Sun CY, Liu P, Liu YT, Chen J, Chen GJ |
743 - 749 |
Floating behavior of hydrophobic glass spheres Liu XJ, Wang XL, Liang YM, Zhou F |
750 - 755 |
beta-Lactoglobulin aggregates in foam films: Correlation between foam films and foaming properties Rullier B, Axelos MAV, Langevin D, Novales B |
756 - 760 |
Wool keratin: A novel building block for layer-by-layer self-assembly Yang X, Zhang H, Yuan XL, Cui SX |
761 - 765 |
Impedance differences found with n-alkanethiol monolayers prepared by contact printing and solution adsorption Adamczyk LA, Anderson MR |
766 - 772 |
Aggregation behavior of an amino acid-derived bolaamphiphile and a conventional surfactant mixed system Chen YX, Liu Y, Guo R |
773 - 779 |
Prediction of hydrophile-lipophile balance values of anionic surfactants using a quantitative structure-property relationship Luan F, Liu HT, Gao YA, Li QZ, Zhang XY, Guo Y |
780 - 785 |
Water-in-oil gel emulsions from a cholesterol derivative: Structure and unusual properties Peng JX, Xia HY, Liu KQ, Gao D, Yang M, Yan N, Fang Y |
786 - 792 |
Effect of relative humidity on the evaporation path from a phenethyl alcohol emulsion Friberg SE |
793 - 802 |
Self-assembly in aqueous solutions of imidazolium ionic liquids and their mixtures with an anionic surfactant Smirnova NA, Vanin AA, Safonova EA, Pukinsky IB, Anufrikov YA, Makarov AL |
803 - 807 |
Self-assembled organogels formed by monochain derivatives of ethylenediamine Luo XZ, Li ZF, Xiao W, Wang Q, Zhong JL |
808 - 813 |
Preparation and properties of hydroxycamptothecin-loaded nanoparticles made of amphiphilic copolymer and normal polymer Wang JL, Wang R, Li LB |
814 - 819 |
Microemulsion-mediated synthesis of cobalt (pure fcc and hexagonal phases) and cobalt-nickel alloy nanoparticles Ahmed J, Sharma S, Ramanujachary KV, Lofland SE, Ganguli AK |
820 - 826 |
Glycerol effects on the formation and rheology of hexagonal phase and related gel emulsion Alam MM, Aramaki K |
827 - 833 |
Microstructural characterization of lysophosphatidylcholine micellar aggregates: The structural basis for their use as biomembrane mimics Vitiello G, Ciccarelli D, Ortona O, D'Errico G |
834 - 841 |
Streaming potential for microchannels of arbitrary cross-sectional shapes for thin electric double layers Park HM, Lim JY |
842 - 849 |
Rheology of the Pluronic P103/water system in a semidilute regime: Evidence of nonequilibrium critical behavior Fernandez VVA, Tepale N, Alvarez JG, Perez-Lopez JH, Macias ER, Bautista F, Pignon F, Rharbi Y, Gamez-Corrales R, Manero O, Puig JE, Soltero JFA |
850 - 856 |
3D simulations of hydrodynamic drag on a nonhomogeneously structured permeable sphere and advective flow thereof Hsu JP, Chou CH, Tseng S, Wu RM |
857 - 864 |
Influence of the finite ion size on the predictions of the standard electrokinetic model: Frequency response Aranda-Rascon MJ, Grosse C, Lopez-Garcia JJ, Horno J |
865 - 871 |
Preparation of an amphiphilic triblock copolymer with pH- and thermo-responsiveness and self-assembled micelles applied to drug release Qu TH, Wang AR, Yuan JF, Gao QY |
872 - 878 |
An investigation into the improvement of adhesive strength of polyimides by incorporation of elastomeric nanoparticles Khoee S, Mahdavian AR, Bairamy W, Ashjari M |
879 - 888 |
Direct synthesis and characterizations of fct-structured FePt nanoparticles using poly(N-vinyl-2-pyrrolidone) as a protecting agent Iwamoto T, Matsumoto K, Matsushita T, Inokuchi M, Toshima N |
889 - 897 |
Controlled synthesis, optical and electronic properties of Eu3+ doped yttrium oxysulfide (Y2O2S) nanostructures Thirumalai J, Chandramohan R, Auluck S, Mahalingam T, Srikumar SR |
898 - 901 |
Diffuse sorption modeling: Apparent H/Na, or the same, Al/Na exchange on clays Pivovarov S |
902 - 907 |
Immobilization of intact liposomes on solid surfaces: A quartz crystal microbalance study Vu TH, Shimanouchi T, Ishii H, Umakoshi H, Kuboi R |
908 - 908 |
A cauliflower-like gold structure for superhydrophobicity (vol 334, pg 103, 2009) Ren HX, Huang XJ, Yarimaga O, Choi YK, Gu N |