| 2303 - 2309 |
Effect of molecular structure of styrene-butadiene block copolymers on morphology, rheological properties, and impact strength of polystyrene/polyethylene blends
Fortelny I, Mikesova J, Hromadkova J, Hasova V, Horak Z |
| 2310 - 2315 |
Polymer gel electrolytes based on thermoplastic polyurethane
Tian LY, Zhu WH, Tang XZ |
| 2316 - 2321 |
Mechanical and thermal properties of phenolic resin-layered silicate nanocomposites synthesized by melt intercalation
Choi MH, Chung IJ |
| 2322 - 2332 |
Compatibilization of polymer blends from poly styrene-co-acrylonitrile) and polycarbonate by oxazoline modification of poly(styrene-co-acrylonitrile) in the melt
Becker HG, Schmidt-Naake G |
| 2333 - 2336 |
Reducing the contents of free phenol and formaldehyde in phenolic foam
Li WL, Lin Q, Yan MF, Zou YS |
| 2337 - 2347 |
Synthesis and characterization of conducting poly(aniline-co-diaminodiphenylsulfone) copolymers
Dan A, Sengupta PK |
| 2348 - 2357 |
Thermoplastic elastomeric blend of nitrile rubber and poly(styrene-co-acrylonitrile). II. Replacement of nitrile rubber by its vulcanizate powder
Anandhan S, De PP, Bhowmick AK, De SK, Bandyopadhyay S |
| 2358 - 2363 |
Synthesis and characterization of block copolymers from aromatic diols, fumaric acid, sebacic acid and PEG
Najafi F, Sarbolouki MN |
| 2364 - 2376 |
Influence of the reaction mechanism on the shape accuracy of optical components obtained by photoreplication
Verstegen EJK, Faasen JHP, Stapert HR, Duineveld PC, Kloosterboer JG |
| 2377 - 2384 |
Computer simulation of the filling process in gas-assisted injection molding based on gas-penetration modeling
Zhou HM, Li DQ |
| 2385 - 2390 |
Enhancement of uranyl ion uptake by the prestructuring of poly(2-hydroxyethyl methacrylate itaconic acid) hydrogels in the presence of lead and cadmium ions/polarographic determination
Ozyurek C, Caykara T, Inam R |
| 2391 - 2399 |
Effect of mercapto-modified ethylene-vinyl acetate on the curing parameters and mechanical and dynamic mechanical properties of vulcanized nitrile rubber/ethylene-vinyl acetate blends
Jansen P, Garcia FG, Soares BG |
| 2400 - 2407 |
Small-angle X-ray scattering from polyethylene: Distorted lamellar structures
Marega C, Marigo A, Causin V |
| 2408 - 2414 |
Effect of anhydride-modified ethylene-propylene-diene rubber and ethylene-vinyl acetate copolymers on the compatibilization of nitrile rubber/ethylene-propylene-diene rubber blends
Oliveira MG, Soares BG |
| 2415 - 2419 |
Plasma-graft polymerization of a monomer with double bonds onto the surface of carbon fiber and its adhesion to a vinyl ester resin
Yamada K, Yamane H, Kumada K, Tanabe S, Kajiyama T |
| 2420 - 2427 |
Crosslinking reaction of poly(vinyl alcohol) with poly(acrylic acid) (PAA) by heat treatment: Effect of neutralization of PAA
Kumeta K, Nagashima I, Matsui S, Mizoguchi K |
| 2428 - 2432 |
Creation of functional materials by use of a slow crystallization process in the nonequilibrium state. I. Porous polyamide microparticles
Asano Y, Nakayama K, Yao S |
| 2433 - 2440 |
Ion-plasma modification of polyvinylchloride microfiltration membranes
Vladkova TG, Dineff P, Stojcheva R, Tomerova B |
| 2441 - 2448 |
Pervaporation separation of water-isopropanol mixtures using ZSM-5 zeolite incorporated poly(vinyl alcohol) membranes
Kittur AA, Kariduraganavar MY, Toti US, Ramesh K, Aminabhavi TM |
| 2449 - 2452 |
Phase behavior of N-isopropylacrylamide/acrylic acid copolymer hydrogels prepared with ultrasound
Seida Y, Takeshita K, Nakano Y |
| 2453 - 2459 |
Influence of untreated and novel electron-beam-modified surface-coated silica filler on the thermorheological properties of ethylene-octene copolymer
Ray S, Bhowmick AK, Swayajith S |
| 2460 - 2468 |
Electrochemical preparation of poly(2-bromoaniline) and poly(aniline-co-2-bromoaniline) in acetonitrile
Sahin Y, Percin S, Sahin M, Ozkan G |
| 2469 - 2474 |
Investigation of ethylene and styrene copolymerization initiated with dinuclear constrained geometry catalysts holding polymethylene as a bridging ligand and indenyl as a cyclopentadienyl derivative
Noh SK, Yang YD, Lyoo WS |
| 2475 - 2484 |
Compatibilization of PE/PS and PE/PP blends. I. Effect of processing conditions and formulation
Kallel T, Massardier-Nageotte V, Jaziri M, Gerard JF, Elleuch B |
| 2485 - 2499 |
Ultraviolet curing kinetics of cycloaliphatic epoxide with real-time Fourier transform infrared spectroscopy
Chen JX, Soucek MD |
| 2500 - 2502 |
Preparation of O-carboxymethyl chitosans and their effect on color yield of acid dyes on silk
Wu YG, Chan WL, Szeto YS |
| 2503 - 2507 |
Study on the thermoplastic vulcanizate using ultrasonically treated rubber powder
Kim JK, Lee SH, Hwang SH |
| 2508 - 2516 |
DSC analysis of epoxy molding compound with plasma polymer-coated silica fillers
Roh JH, Lee JH, Kim NI, Kang HM, Yoon TH, Song KH |
| 2517 - 2524 |
Evaluation of isomeric composition of resol-type phenol formaldehyde matrix resins for silica-phenolic composites and its effect on cure characteristics of the resin
Scariah KJ, Usha KM, Narayanaswamy K, Shanmugam K, Sastri KS |
| 2525 - 2531 |
Preparation and characterization of a polyaniline/poly(butyl acrylate-vinyl acetate) composite as a novel conducting polymer composite
Mirmohseni A, Valiegbal K, Wallace GG |
| 2532 - 2539 |
Processing and characterization of epoxy-anhydride-based intercalated nanocomposites
Torre L, Frulloni E, Kenny JM, Manferti C, Camino G |
| 2540 - 2548 |
Matrix-assisted laser desorption/ionization mass spectrometry of synthetic polymers. VI. Analysis of phenol-urea-formaldehyde cocondensates
Schrod M, Rode K, Braun D, Pasch H |
| 2549 - 2556 |
Development of polymer-molding-releasing metal mold surfaces with perfluorinated-group-containing polymer plating
Mori K, Sasaki Y, Hirahara H, Oishi Y |
| 2557 - 2571 |
Effect of reinforcement type and length on physical properties, surface quality, and cycle time for sheet molding compound (SMC) compression molded parts
Boylan S, Castro JM |
| 2572 - 2577 |
Proton exchange membranes by grafting of styrene-acrylic acid onto FEP by preirradiation technique. I. Effect of synthesis conditions
Phadnis S, Patri M, Hande VR, Deb PC |
| 2578 - 2582 |
H-1 T-2-NMR monitoring of crosslinked polyolefin aging
Harris DJ, Assink RA, Gillen KT |
| 2583 - 2591 |
On the correlation between characteristics of topological and molecular structures and mechanical properties of NR/chlorinated polyethylene rubbers
Jurkowska B, Jurkowski B |
