| 3313 - 3317 |
Properties of potassium titanate whisker reinforced polytetrafluoroethylene-based friction materials of ultrasonic motors
Fan Y, Ding QJ, Yao ZY |
| 3318 - 3328 |
Behavior of semi IPN hydrogels composed of PEG and AAm/SMA copolymers in swelling and uptake of Janus Green B from aqueous solutions
Uzum OB, Karadag E |
| 3329 - 3334 |
Nonisothermal cure kinetics and diffusion effect of liquid-crystalline epoxy sulfonyl bis(1,4-phenylene)bis[4-(2,3-epoxypropyloxy)benzoate] resin with aromatic diamine
Gao JG, Huo L, Du YG |
| 3335 - 3344 |
Effect of oxidation progress of tributylborane on the grafting of polyolefins
Liu SJ, Zheng Z, Li MR, Wang XL |
| 3345 - 3350 |
A comparative study of two polyelectrolyte complexes
Valdes O, Alexandrova L, Zaldivar D, Katime I |
| 3351 - 3360 |
Preparation and characterization of nanoparticle-filled, mixed-matrix membranes for the pervaporation dehydration of isopropyl alcohol
Prasad CV, Yeriswamy B, Sudhakar H, Sudhakara P, Subha MCS, Song JI, Rao KC |
| 3361 - 3367 |
Rheological study on tetrafluoroethylene/hexafluoropropylene copolymer and its implication for processability
Chen XY, Yuan WZ, Li H, Zhang YM |
| 3368 - 3375 |
Ordered mesoporous carbons with various pore sizes: Preparation and naphthalene adsorption performance
Wang KL, Huang BC, Liu DM, Ye DQ |
| 3376 - 3384 |
Synergistic effect of hindered amine light stabilizers/ultraviolet absorbers on the plasticized PVC during photo-irradiation
Chai RD, Chen SJ, Zhang J |
| 3385 - 3395 |
Study of the dimensional instabilities of laminated polypropylene films during heating treatments
Poncot M, Martin J, Hiver JM, Verchere D, Dahoun A |
| 3396 - 3403 |
Synthesis, characterization, and application of hetarylazo disperse colorants: Preparation and properties of ink-jet inks with active agents for polyester printing
Karanikas EK, Nikolaidis NF, Tsatsaroni EG |
| 3404 - 3409 |
Preparation and characterization of a series of novel EuIII-complex-polyurethane acrylate materials based on mixed 6-hydroxy-1-naphthoate and 1,10-phenanthroline ligands
Fang SM, Wang C, Hu M, Wang PY, Zhou LM, Gao LJ, Liu CS |
| 3410 - 3418 |
Poly(2-aminobiphenyl), preparation, characterization, mechanism, and kinetics of the electropolymerization process
Badawy WA, Ismail KM, Khalifa ZM, Medany SS |
| 3419 - 3428 |
Preparation of PBAS core-shell structured polymer by seeded emulsion polymerization and investigation in AS resin toughness
Zhao HY, Liu XR, Fu NA, Zhang QX, Wang NY, He LQ, Qu XW |
| 3429 - 3437 |
Glycerol citrate polyesters produced through heating without catalysis
Tisserat B, O'kuru RH, Hwang H, Mohamed AA, Holser R |
| 3438 - 3446 |
Removal of toxic metal ions by using composite cation-exchange material
Nabi SA, Bushra R, Shahadat M |
| 3447 - 3455 |
Thermal energy storage by poly(styrene-co-p-stearoylstyrene) copolymers produced by the modification of polystyrene
Alkan C, Sari A, Bicer A |
| 3456 - 3462 |
Conducting stability of nickel-coated graphite/methyl vinyl silicone rubber composites
Zou H, Yan SN, Sun YB, Zhang LQ, Tian M |
| 3463 - 3468 |
Rapid synthesis of poly(p-dioxanone)/montmorillonite nanocomposites under microwave irradiation
Wang XL, Li Y, Li B, Wang YZ |
| 3469 - 3476 |
Mechanical properties of functionally graded carbon black-styrene butadiene rubber composites: Effect of modifying gradation and average filler loading
Ahankari S, Kar KK |
| 3477 - 3483 |
Effect of amine-terminated butadiene-acrylonitrile/clay combinations on the structure and properties of epoxy nanocomposites
Kelnar I, Rotrekl J, Kapralkova L, Hromadkova J, Strachota A |
| 3484 - 3489 |
Improvement of cutting and chipping resistance of carbon black-filled styrene butadiene rubber by addition of nanodispersed clay
Ma JH, Wang YX, Zhang LQ, Wu YP |
| 3490 - 3499 |
Synthesis and characterization of novel epoxy-modified waterborne polyurethanes and their use in carbon fiber sizing
Liu ZQ, Tian YH, Kang SM, Zhang XJ |
| 3500 - 3508 |
Characterization of radiation-grafted polymer films using CP/MAS NMR spectroscopy and confocal Raman microscopy
Wallasch F, Abele M, Gubler L, Wokaun A, Muller K, Scherer GG |
| 3509 - 3516 |
Preparation, characterization, and drug-release properties of PEG-DA-based copolymer hydrogel microspheres
Tan GX, Liao JW, Ning CY, Zhang L |
| 3517 - 3523 |
Flame-retardant and physical properties of poly(vinyl alcohol) chemically modified by diethyl chlorophosphate
Lin JS, Chen L, Liu Y, Wang YZ |
| 3524 - 3531 |
Solid-phase extraction of S-(-)-amlodipine from plasma with a uniformly sized molecularly imprinted polymer
Luo KX, Liu M, Fu Q, Amut E, Zeng AG, Chang C |
| 3532 - 3536 |
Synthesis and characterization of MQ silicone resins
Sun F, Hu YL, Du HG |
| 3537 - 3544 |
Preparation of antibacterial poly(methyl methacrylate) by solution blending with water-insoluble antibacterial agent poly[(tert-buty1amino) ethyl methacrylate]
Zuo HJ, Wu DC, Fu RW |
| 3545 - 3551 |
Effect of the aggregation structure on the thermal shrinkage of polyacrylonitrile fibers during the heat-treatment process
Wang B, Zhao C, Xiao SJ, Zhang J, Xu LH |
| 3552 - 3559 |
Formation of double-surface-silvered polyimide films via a direct ion-exchange self-metallization technique: The case of BPADA/ODA and [Ag(NH3)(2)](+)
Lin ZW, Qi SL, Wu DZ |
| 3560 - 3566 |
Synergistic antimicrobial effects of polyaniline combined with silver nanoparticles
Jia QM, Shan SY, Jiang LH, Wang YM, Li D |
| 3567 - 3574 |
Synergy of magnesium and calcium oxides in intumescent flame-retarded polypropylene
Ma ZL, Fan CR, Lu GY, Liu XY, Zhang H |
| 3575 - 3581 |
Effect of cobalt-60 gamma radiation on the physical and chemical properties of poly(ethylene terephthalate) polymer
Siddhartha, Aarya S, Dev K, Shakir M, Ahmed B, Wahab MA |
| 3582 - 3590 |
Monte Carlo simulation of molecular weight distribution and copolymer composition in transamidation reaction of polyamides
Yao Z, Sun JM, Wang Q, Zhou GD, Cao K |
| 3591 - 3601 |
Electrosynthesis and characterization of a new multielectrochromic copolymer of 1,4-bis(2-thienyl) benzene with 3,4-ethylenedioxythiophene
Cui CS, Xu LY, Zhao JS, He QP, Wang B |
| 3602 - 3609 |
Enzyme-catalyzed ring-opening polymerization of cyclic esters in the presence of poly(ethylene glycol)
Sobczak M |
| 3610 - 3616 |
Production and characterization of hybrid BEH-PPV/PEO conjugated polymer nanofibers by forcespinning (TM)
Padron S, Patlan R, Gutierrez J, Santos N, Eubanks T, Lozano K |
| 3617 - 3629 |
Functional terpolymers containing vinylphosphonic acid: The synthesis and characterization of poly(vinylphosphonic acid-co-styrene-co-maleic anhydride)
Kavlak S, Guner A, Rzayev ZMO |
| 3630 - 3637 |
Effects of kinetics coefficients on ternary phase separation during the wet spinning process
Han Y, Wang J, Zhang HD |
| 3638 - 3647 |
Electrospun fibers from functional polyglycidol/poly(e-caprolactone) blends with defined surface properties
Haamann D, Bispinghoff M, Honders D, Suschek C, Moller M, Klee D |
| 3648 - 3657 |
Finite element modeling of the flow of a rubber compound through an axisymmetric die using the CEF viscoelastic constitutive equation
Ghoreishy MHR, Bagheri-Jaghargh M, Naderi G, Soltani S |
| 3658 - 3665 |
Study on the mechanism of the formation of polyhedral oligomeric silsesquioxanes by the 2D correlation infrared spectral
Qu YB, Huang GS, Wang XA, Li JL |
| 3666 - 3675 |
Effective aminolytic depolymerization of poly(ethylene terephthalate) waste and synthesis of bisoxazoline therefrom
Shah RV, Shukla SR |
| 3676 - 3681 |
Soybean meal-based adhesive enhanced by MUF resin
Gao Q, Shi SQ, Zhang SF, Li JZ, Wang XM, Ding WB, Liang KW, Wang JW |
| 3682 - 3687 |
The influence of low- and high-linear energy transfers on some physical properties of poly(methyl-methacrylate) samples
Eissa MF, Kaid MA, Kamel NA |
| 3688 - 3694 |
Developing chromic dyeable PET nanocomposites: The dye absorption and complex formation mechanisms
Dastjerdi R, Mojtahedi MRM, Heidari N |
| 3695 - 3701 |
Investigation of the curing process of spray polyurea elastomer by FTIR, DSC, and DMA
Zhou Q, Cao L, Li Q, Yao YL, Ouyang ZF, Su ZQ, Chen XN |
| 3702 - 3707 |
Electrocatalytic performance of Pt supported on polyaniline-poly(styrene sulfonate) hydrogel
Jia YJ, Jiang JC, Sun K, Dai TY |
| 3708 - 3720 |
Hydroxyalkyl derivatives of phenyldiamine as modifiers for unsaturated polyester resins. II. derivatives of phenyl-1,3-diamine
Duliban J |
| 3721 - 3729 |
Energy transfer and photoactivity of photozymes included in polyacrylate hydrogels
Sorochynska L, Grishchuk S, Korres S, Riehn C, Niedner-Schatteburg G, Georgieva V, Georgiev G, Karger-Kocsis J |
| 3730 - 3736 |
Immobilization of copper(II)-poly(N-vinylimidazole) complex on magnetic nanoparticles and its catalysis of oxidative polymerization of 2,6-dimethylphenol in water
Wang H, Zhang WL, Shentu BQ, Gu C, Weng ZX |
| 3737 - 3744 |
Development and characterization of a novolac resin/BaTiO3 nanoparticles composite system
Asimakopoulos I, Zoumpoulakis L, Psarras GC |
| 3745 - 3754 |
Processing and tribology of thermoplastic polyurethane particulate composite materials
Golaz B, Tetouani S, Diomidis N, Michaud V, Mischler S |
| 3755 - 3769 |
Effect of the manufacturing conditions on the structure and performance of thin-film composite membranes
Zhang RX, Vanneste J, Poelmans L, Sotto A, Wang XL, Van der Bruggen B |
| 3770 - 3777 |
Immobilization of magnetic magnetite nanoparticle film on polyamide fabric
Zhang H, Zheng JY |
| 3778 - 3787 |
Evaluation of the complex hygrothermal behaviors of epoxy-amine systems
Choi S, Phantu A, Douglas EP |
| 3788 - 3793 |
The effect of absorbed moisture on dielectric behavior of silica (micro)-unsaturated polyester composites
Sharma RA, D'Melo D, Chaudhari L, Bhattacharya S, Gawande R, Patil GS |
| 3794 - 3801 |
Preparation and properties of carbon black filled EPDM/POE thermaplastic vulcanizates
Lv XF, Zhang BS, Qiu GX |
| 3802 - 3810 |
The effect of titania content on the physical properties of polyimide/titania nanohybrid films
Kizilkaya C, Dumludag F, Karatas S, Apohan NK, Altindal A, Gungor A |
| 3811 - 3819 |
Miscibility and specific interactions in blends of poly(4-vinylphenol-co-methyl methacrylate)/poly(styrene-co-4-vinylpyridine)
Belabed C, Benabdelghani Z, Granado A, Etxeberria A |
| 3820 - 3828 |
Covalent immobilization of penicillin G acylase onto amine-functionalized PVC membranes for 6-APA production from penicillin hydrolysis process. II. Enzyme immobilization and characterization
Eldin MSM, El Enshasy HA, Hassan ME, Haroun B, Hassan EA |
| 3829 - 3835 |
Effect of curing behaviors on the properties of poly(arylene ether nitrile) end-capped with phthalonitrile
Zou YK, Yang J, Zhan YQ, Yang XL, Zhong JC, Zhao R, Liu XB |
| 3836 - 3848 |
Novel in situ synthesis in the preparation of ultraviolet-curable nanocomposite barrier coatings
Pavlacky E, Ravindran N, Webster DC |
| 3849 - 3855 |
Cholesteric monomer and elastomers containing menthyl groups: Synthesis and phase behavior
Hu JS, Li D, Meng QB, Yao DS |
| 3856 - 3870 |
Accelerated and real-time creep and creep-rupture results for aramid fibers
Giannopoulos IP, Burgoyne CJ |
| 3871 - 3879 |
A comparative study of TiO2 and surface-treated TiO2 nanoparticles on thermal and mechanical properties of poly(epsilon-caprolactone) nanocomposites
Wang GS, Chen GY, Wei ZY, Yu T, Liu L, Wang P, Chang Y, Qi M |
| 3880 - 3887 |
Isothermal and nonisothermal crystallization of HDPE composites containing multilayer carton scraps as filler
Di Lorenzo ML, Avella M, Avolio R, Bonadies I, Carfagna C, Cocca M, Errico ME, Gentile G |
| 3888 - 3898 |
Preparation and characterization of polysulfone-cyclodextrin composite nanofiltration membrane: Solvent effect
Baruah K, Hazarika S, Borthakur S, Dutta NN |
| 3899 - 3903 |
One-pot in situ ball milling preparation of polymer/graphene nanocomposites
Wu H, Zhao WF, Chen GH |
| 3904 - 3912 |
Synthesis and characterization of novel aromatic poly(ester amide)s containing pendant trifluoromethylphenoxy groups
Liu YJ, Pei XL, Sheng SR, Yang F, Liu XL, Song CS |
| 3913 - 3919 |
Synthesis and chemical modification of new luminescent substituted poly(p-phenylene) polymers
Chemli M, Said AH, Fave JL, Barthou C, Majdoub M |
| 3920 - 3928 |
Natural rubber/multiwalled carbon nanotube composites developed with a combined self-assembly and latex compounding technique
Peng Z, Feng CF, Luo YY, Li YZ, Yi ZF, Kong LX |
| 3929 - 3935 |
Epoxy hybrid composites cured with octaaminophenyl polyhedral oligomeric silsesquioxane
Chen GX, Si LX, Lu P, Li QF |
| 3936 - 3945 |
Effects of thiophene units on substituted benzothiadiazole and benzodithiophene copolymers for photovoltaic applications
Ding P, Zou YP, Chu CC, Xiao DQ, Hsu CS |
| 3946 - 3955 |
Effect of zinc borate on the fire and thermal degradation behaviors of a poly(3-hydroxybutyrate-co-4-hydroxybutyrate)-containing intumescent flame retardant
Zhang R, Huang H, Yang W, Xiao XF, Hu Y |
| 3956 - 3962 |
Synthesis and characterization of conducting poly(3-acetylpyrrole)/carbon nanotube composites
Zheng YY, Wang P, Li BM |
| 3963 - 3976 |
Routes to carboxylic acid functional acrylonitrile copolymers via N-tert-butyl-N-(1-diethylphosphono-2,2-dimethylpropyl) free nitroxide based nitroxide-mediated polymerization
Consolante V, Maric M, Penlidis A |
| 3977 - 3985 |
Potassium persulfate-mediated preparation of conducting polypyrrole/polyacrylonitrile composite fibers: Humidity and temperature-sensing properties
Acar H, Karakisla M, Sacak M |
| 3986 - 3995 |
Freestanding chemiresistive polymer composite ribbons as high-flux sensors
Benz M, Patel SV |
| 3996 - 4006 |
Plasma enhanced chemical vapor deposition of tetraethylorthosilicate and hexamethyldisiloxane on polyester fabrics under pulsed and continuous wave discharge
Kale KH, Palaskar SS |
| 4007 - 4014 |
Fatigue damage initiation of a PA66/glass fibers composite material
Esmaeillou B, Fereirra P, Bellenger V, Tcharkhtchi A |
| 4015 - 4027 |
Surface modification of PVDF membranes with sulfobetaine polymers for a stably anti-protein-fouling performance
Li Q, Zhou B, Bi QY, Wang XL |
| 4028 - 4033 |
Investigation of free volume and damping property for polycarbonate/multiwalled carbon nanotube composites by positron annihilation technology
Gong ZL, Yan XL, Gong J, Wang JJ, Wang B |
| 4034 - 4040 |
Micronization of polyethylene terephthalate via freezing of highly sheared emulsions of polyethylene terephthalate in saturated liquid tetrahydrofuran
Tapriyal D, Fan X, Heintz Y, Morsi B, Beckman E, Enick R, Sane A, Thies M, Schutte G, Niederst J |
| 4041 - 4048 |
Effect of inorganic salts on viscosifying behavior of a thermoassociative water-soluble terpolymer based on 2-acrylamido-methylpropane sulfonic acid
Liu XL, Wang Y, Lu ZY, Chen QS, Feng YJ |
| 4049 - 4059 |
Synthesis and solution properties of an associative polymer with excellent salt-thickening
Zhong CR, Wang W, Yang MM |
| 4060 - 4073 |
Mechanical and rheological properties, and morphology of polyamide-6/organoclay/elastomer nanocomposites
Isik-Gulsac I, Yilmazer U, Bayram G |
| 4074 - 4081 |
Evaluation of thermal and mechanical properties of rubber compositions based on SBR extended with safe oils
Delpech MC, Mello IL, Delgado FCS, Sousa JM |
| 4082 - 4090 |
Revisiting the thermal relaxations of poly(vinyl alcohol)
Gonzalez-Campos JB, Garcia-Carvajal ZY, Prokhorov E, Luna-Barcenas JG, Mendoza-Duarte ME, Lara-Romero J, del Rio RE, Sanchez IC |
| 4091 - 4099 |
Physical characterization and rheological behavior of polyurethane/poly(epsilon-caprolactone) blends, prepared by solution blending using dimethylacetamide
Mostafavi F, Ebrahimi NG |
| 4100 - 4108 |
Preparation and characterization of electrospun polyurethane-polypyrrole nanofibers and films
Yanilmaz M, Kalaoglu F, Karakas H, Sarac AS |
| 4109 - 4120 |
Effect of nanoclay type on dyeability of polyethylene terephthalate/clay nanocomposites
Gashti MP, Moradian S |
| 4121 - 4127 |
Surface modification of siloxane containing polyurethane polymer by dielectric barrier discharge at atmospheric pressure
Kostov KG, dos Santos ALR, Nascente PAP, Kayama ME, Mota RP, Algatti MA |
| 4128 - 4134 |
Effects of 3,4'-oxydianiline on the structures and properties of a novel aromatic polyimide foam
Li Y, Liu XY, Zhan MS, Wang K |
| 4135 - 4141 |
Fabrication and characterization of polyurethane electrospun nanofiber membranes for protective clothing applications
Gorji M, Jeddi AAA, Gharehaghaji AA |
| 4142 - 4148 |
Synthesis of monodispersed polyacrylonitrile microspheres by dispersion polymerization
Zhang Z, Jiang W, Wang YJ, Wu YC, Hou X |
