| 2497 - 2507 |
Effect of the Blooming of Chemical Curatives on the Cyclic Fatigue Life of Natural Rubber Filled with a Silanized Silica Nanofiller
Saeed F, Ansarifar A, Ellis RJ, Haile-Meskel Y, Farid AS |
| 2508 - 2515 |
Effect of Surface Treatments on the Thermal Behavior and Tensile Strength of Piassava (Attalea funifera) Fibers
d'Almeida ALFS, d'Almeida JRM, Barreto DW, Calado V |
| 2516 - 2526 |
Shrinkage Behavior of Poly(ethylene terephthalate) for a New Cementitious-Shrinkable Polymer Material System
Dunn SC, Jefferson AD, Lark RJ, Isaacs B |
| 2527 - 2533 |
Preliminary Study on the Utilization of Lignin as Filler in Ultra-Violet (UV) Curable System
Rozman HD, Koay EL, Tay GS |
| 2534 - 2542 |
Synthesis and Photovoltaic Properties of Dithienyl Benzotriazole Based Poly(phenylene vinylene)s
Zhang ZH, Peng B, Ding P, Liu B, He YH, Zhou KC, Li YF, Pan CY, Zou YP |
| 2543 - 2549 |
Synthesis of Polylactide with Varying Molecular Weight and Aliphatic Content: Effect on Moisture Sorption
Singh VM, Koo D, Palmese GR, Cairncross RA |
| 2550 - 2562 |
Optimized Formulation of an Oxidative Curing System for Liquid Polysulfide Sealants Used in Fuel Tanks by D-Optimal Design Method
Rezaeian I, Zahedi P, Rezaeian A, Ghadiri M, Honarvar FM, Mohammadi AH |
| 2563 - 2570 |
Vinyl Triazole Carrying Metal-Chelated Beads for the Reversible Immobilization of Glucoamylase
Kok S, Osman B, Kara A, Besirli N |
| 2571 - 2578 |
Effects of alpha-Amylase and Glycerol Levels on the Composition Optimization of Poly(beta-hydroxybutyrate-co-valerate)/Starch Blended Biodegradable Resin Analyzed with Response Surface Methodology
Cheng WY, Peng JC, Lui WB |
| 2579 - 2586 |
Synthesis of Methacrylate Copolymers and Their Effects as Pour Point Depressants for Lubricant Oil
Jung KM, Chun BH, Park SH, Lee CH, Kim SH |
| 2587 - 2595 |
Characterization of the Fracture Properties of Aragonite- and Calcite-Filled Poly(epsilon-Caprolactone) by the Essential Work of Fracture Method
Tuba F, Olah L, Nagy P |
| 2596 - 2605 |
Fabrication of Polymer-Gadolinium (III) Complex Nanomicelle from Poly(ethylene glycol)-Polysuccinimide Conjugate and Diethylenetriaminetetraacetic Acid-Gadolinium as Magnetic Resonance Imaging Contrast Agents
Zhang WL, Yong DW, Huang J, Yu JH, Liu SY, Fan MX |
| 2606 - 2614 |
Novel Dynamic Vulcanization of Polyethylene and Ozonolysed Natural Rubber Blends: Effect of Curing System and Blending Ratio
Utara S, Boochathum P |
| 2615 - 2620 |
Characteristics and Iso-Baric Relaxation Phenomenon of PMMA Monolayers with Different Molecular Weights at Different Temperatures
Jheng KT, Hsu WP |
| 2621 - 2626 |
Synthesis and Characterization of Grafted Carboxymethyl Guar Gum
Adhikary P, Krishnamoorthi S, Singh RP |
| 2627 - 2631 |
UV Exposure Effects on Photoinitiator-Grafted Styrene-Butadiene-Styrene Triblock Copolymer
Wu GL, Chen ZM, Zeng SJ, Yu PR, Xie YY, Xiong YQ, Xu WJ |
| 2632 - 2640 |
Synthesis and Thermal Characterization of Phenolic Resin/Silica Nanocomposites Prepared with High Shear Rate-Mixing Technique
Natali M, Monti M, Kenny J, Torre L |
| 2641 - 2647 |
Effect of Molecular Weight and Testing Rate on Peel and Shear Strength of Epoxidized Natural Rubber (ENR 50)-Based Adhesives
Khan I, Poh BT |
| 2648 - 2653 |
Electrosprayed Porous Microspheres for the Removal of Endocrine Disruptors
Zhang QC, Zhang YJ, Wei QA, Wang XJ, Liu J, Yang J, Zhao CS |
| 2654 - 2662 |
Cure Characteristics, Swelling Behaviors, and Mechanical Properties of Carbon Black Filler Reinforced EPDM/NBR Blend System
Manoj KC, Kumari P, Unnikrishnan G |
| 2663 - 2672 |
Melt-Mixed Polypropylene/Acrylonitrile-Butadiene-Styrene Blends with Multiwall Carbon Nanotubes: Effect of Compatibilizer and Modifier on Morphology and Electrical Conductivity
Khare RA, Bhattacharyya AR, Kulkarni AR |
| 2673 - 2677 |
Purification of Lactic Acid from Fermentation Broth by Spherical Anion Exchange Polymer
Zhou J, Bi W, Row KH |
| 2678 - 2684 |
Optical and Electronic Properties of 3,4-Dialkylthiophene-Based p-/n-Alternating Copolymers
Qi ZJ, Wang XM, Wei B, Kang F, Tang LL, Hong MX, Sun YM |
| 2685 - 2692 |
Influence of Fluorinated Segments of Variable Length on the Thickening Properties of a Model HASE Skeleton
Oddes O, Amigoni S, de Givenchy ET, Reeve P, Duccini Y, Guittard F |
| 2693 - 2698 |
Ring-Opening Polymerization of Trimethylenecarbonate by the Bridged Diphenoxo Ytterbium (II) Complex
Zhao B, Hu XL, Lu CR |
| 2699 - 2706 |
Synthesis of Styrene-Ethylene-Butylene-Styrene Triblock Copolymer-g-Polylactic Acid Copolymer and Its Potential Application as a Toughener for Polylactic Acid
Qi RR, Luo MN, Huang M |
| 2707 - 2715 |
Preparation and Properties of Chitosan-graft-Poly( methyl methacrylate) Nanoparticles Using Potassium Diperiodatocuprate (III) as an Initiator
Liu ZJ, Zhao GD, Yu JG, Zhang JQ, Ma XF, Han G |
| 2716 - 2723 |
Minimization of Residual Monomer Content of Superabsorbent Hydrogels via Alteration of Initiating System
Kabiri K, Hesarian S, Jamshidi A, Zohuriaan-Mehr MJ, Boohendi H, Poorheravi MR, Hashemi SA, Ahmad-Khanbeigi F |
| 2724 - 2733 |
Measuring of Coalescence in Polymer Melt Blends Flowing Through Converging Channels
Miroshnikov YP, Egorov AK, Egorova MV |
| 2734 - 2742 |
Biocidal Polymers: Synthesis, Antimicrobial Activity, and Possible Toxicity of Poly(hydroxystyrene-co-methylmethacrylate) Derivatives
Kenawy E, El-Shanshoury AER, Shaker NO, El-Sadek BM, Khattab AHB, Badr BI |
| 2743 - 2753 |
Selective Oxidation of Olefins and Aromatic Alcohols with tert-Butylhydroperoxide Catalyzed by Polymer-Anchored Transition-Metal Complexes
Islam SM, Roy AS, Mondal P, Mondal S, Mubarak M, Hossain D, Sarkar S |
| 2754 - 2759 |
Photopolymerization Characteristics of Bisbenzo[1,3] dioxol-5-ylmethanone as an Initiator
Cui R, Wang KM, Ma GP, Qian B, Yang JX, Yu QA, Nie J |
| 2760 - 2766 |
Preparation and Characterizations of Organic Fluorine-Silicon and Polytetrafluoroethylene Modified Polyester
Jin JA, Wang X, Xiao CF |
| 2767 - 2771 |
Theoretical Analysis of Fracture of Tetra-Needle-Like ZnO Whisker in Polymer Composite
Zhu SB, Jiang M, Qiu JH, Zhou ZW, Wang Y, Fan XM |
| 2772 - 2779 |
Effect of the Extensional Flow on the Properties of Oriented Nanocomposite Films for Twist Wrapping
Dintcheva NT, Marino R, La Mantia FP |
| 2780 - 2785 |
Synthesis of High Molecular Weight Poly(L-lactic acid) via Melt/Solid Polycondensation: Intensification of Dehydration and Oligomerization During Melt Polycondensation
Song FC, Wu LB |
| 2786 - 2789 |
Oligomer Ethylene Glycol Based Electrolytes for Dye-Sensitized Solar Cell
Lan Z, Wu JH, Lin JM, Huang ML |
| 2790 - 2799 |
Studies on Novel Semi-2-IPNs from Polyetherimide and Citraconimide
Gupta P, Alam S |
| 2800 - 2808 |
Preparation and Characterization of Polybutadiene/Allylisobutyl Polyhedral Oligomeric Silsesquioxane Nanocomposites by Anionic Polymerization
Liao MY, Zhang XJ, Fan C, Wang LY, Jin MH |
| 2809 - 2820 |
Investigations of Chromatic Transformations of Polydiacetylene with Aromatic Compounds
Scoville SP, Shirley WM |
| 2821 - 2829 |
Synthesis and Thermal Properties of Poly(n-butyl acrylate)/n-Hexadecane Microcapsules Using Different Cross-Linkers and Their Application to Textile Fabrics
Alay S, Gode F, Alkan C |
| 2830 - 2834 |
Regioselective and Green Synthesis of Nitro Aromatic Compounds Using Polymer-Supported Sodium Nitrite/KHSO4
Zarchi MAK, Rahmani F |
| 2835 - 2841 |
Properties of Bacterial Cellulose Produced in Grape Medium by Native Isolate Gluconacetobacter Sp
Rani MU, Udayasankar K, Appaiah KAA |
| 2842 - 2855 |
Aminolysis of Poly(ethylene terephthalate) Wastes Based on Sunlight and Utilization of the End Product [Bis(2-hydroxyethylene) Terephthalamide] as an Ingredient in the Anticorrosive Paints for the Protection of Steel Structures
Tawfik ME, Ahmed NM, Eskander SB |
| 2856 - 2862 |
Preparation, Structural, and Electrical Studies of Polyaniline/ZnFe2O4 Nanocomposites
Prasanna GD, Jayanna HS, Prasad V |
| 2863 - 2871 |
Topographical and Chemical Characterization of Polymer Surfaces Modified by Physical and Chemical Processes
Barish JA, Goddard JM |
| 2872 - 2880 |
Quantification of Thermal Material Degradation During the Processing of Biomedical Thermoplastics
Ragaert K, Dekeyser A, Cardon L, Degrieck J |
| 2881 - 2890 |
Surface, Tribological, and Mechanical Characterization of Synthetic Skins for Tribological Applications in Cosmetic Science
Bhushan B, Tang W |
| 2891 - 2903 |
Surface Attachment of Horseradish Peroxidase to Nylon Modified by Plasma-Immersion Ion Implantation
Kondyurin A, Nosworthy NJ, Bilek MMM, Jones R, Pigram PJ |
| 2904 - 2911 |
Microwave-Induced Devulcanization for Poly(ethylene-propylene-diene) Recycling
Bani A, Polacco G, Gallone G |
| 2912 - 2920 |
Theoretical and Experimental Study of the Melting Process of High-Density Polyethylene for Multidimensional Vibration Equipment
Zeng GS, Qu JP, Liu YJ |
| 2921 - 2927 |
Recycling of Poly(phenylene ether) Blends
Nerkar M, Bandyopadhyay S, Kamalakaran R, Gupta S, Guo H |
| 2928 - 2937 |
Formation of Blisters in Kapton Polymer by the Effect of 1.25 MeV Gamma Irradiation
Siddhartha, Aarya S, Mishra M, Srivastava AK, Wahab MA |
| 2938 - 2944 |
Bacterial Cellulose/Collagen Composite: Characterization and First Evaluation of Cytocompatibility
Cai ZJ, Yang G |
| 2945 - 2953 |
Characterization of Monodisperse Copolymer Submicrospheres with Branched Structures and Different Glass-Transition Temperatures Prepared by Soap-Free Emulsion Polymerization
Liu YY, Lo MY, Chen H |
| 2954 - 2961 |
Thermogravimetric and Resistivity Study of Ex Situ and In Situ Poly(methyl methacrylate)/Carboxylic Acid Group Functionalized Multiwall Carbon Nanotubes Composites
Das M, Ray D, Bandyopadhyay S, Banerjee S, Bandyopadhyay NR, Basumallik A |
| 2962 - 2970 |
Viscoelastic Relaxation of Styrene-Butadiene-Styrene Block Copolymers with Different Topological Structures
Du MA, Yu QM, Lu Y, Zheng QA |
| 2971 - 2978 |
Fracture Toughness of Polyamide 6/Maleated Ethylene-Propylene-Diene Terpolymer Rubber/Nano Calcium Carbonate Ternary Composites According to Essential Work of Fracture Analysis
Fu LD, Chen S, Wang YJ, Wang XD, Wang X |
| 2979 - 2984 |
Preparation and Characterization of Novel Crosslinked Poly[glycidyl methacrylate-poly(ethylene glycol) methyl ether methacrylate] as Gel Polymer Electrolytes
Luo D, Li Y, Yang MJ |
| 2985 - 2995 |
Synthesis, Characterization, and Properties of Degradable Poly(l-lactic acid)/Poly(butylene terephthalate) Copolyesters Containing 1,4-Cyclohexanedimethanol
Wang BT, Zhang Y, Song PA, Guo ZH, Cheng J, Fang ZP |
| 2996 - 3003 |
The Effect of pH on the Removal of Anionic Dyes from Colored Textile Wastewater Using a Biosorbent
Mahmoodi NM, Arami M, Bahrami H, Khorramfar S |
| 3004 - 3013 |
Preparation and Characterization of Hydrophilic, Spectroscopic, and Kinetic Properties of Hydrogels Based on Polyacrylamide and Methylcellulose Polysaccharide
Aouada FA, de Moura MR, da Silva WTL, Muniz EC, Mattoso LHC |
| 3014 - 3019 |
Electrical Conductivity and Major Mechanical and Thermal Properties of Carbon Nanotube-Filled Polyurethane Foams
Yan DX, Dai K, Xiang ZD, Li ZM, Ji X, Zhang WQ |
| 3020 - 3026 |
Synthesis, Modification, and Porous Properties of New Glycidyl Methacrylate Copolymers
Podkoscielna B |
| 3027 - 3035 |
New Poly(azomethine-urethane)s Including Melamine Derivatives in the Main Chain: Synthesis and Thermal Characterization
Kaya I, Yildirim M, Kamaci M, Avci A |
| 3036 - 3041 |
Studies on Electrically Conductive Composites of Ethylene Propylene Diene Monomer Rubber and Steel Fibers
Athawale AA, Joshi AM |
| 3042 - 3053 |
Biocompatible/Bioabsorbable Silver Nanocomposite Coatings
Qureshi AT, Monroe WT, Lopez MJ, Janes ME, Dasa V, Park S, Amirsadeghi A, Hayes DJ |
| 3054 - 3064 |
Effect of Phthalic Anhydride-Based Hyperbranched Polyesteramide on Cement Characteristics
Amin A, Darweesh HHM, Morsi SMM, Ayoub MMH |
| 3065 - 3070 |
Nonlinear Optical Response of Liquid Crystalline Azo-Dendrimer in Picosecond and CW Regimes
Zhang XQ, Wang CS, Lu XM, Zeng Y |
| 3071 - 3077 |
Swelling and Drug Release Profile of Poly(2-ethyl-2-oxazoline)-Based Hydrogels Prepared by Gamma Radiation-Induced Copolymerization
Ali AE, AlArifi AS |
| 3078 - 3086 |
Polypropylene and Potato Starch Biocomposites: Physicomechanical and Thermal Properties
Roy SB, Ramaraj B, Shit SC, Nayak SK |
| 3087 - 3097 |
Preparation and Characterization of Low Density Polyethylene/Ethylene Methyl Acrylate Glycidyl Methacrylate/Organoclay Nanocomposites
Coskunses FI, Yilmazer U |
| 3098 - 3108 |
Sulfur Containing Poly(N-isopropylacrylamide) Copolymer Hydrogels for Thermosensitive Extraction of Gold(III) Ions
Hemvasdukij S, Ngeontae W, Imyim A |
| 3109 - 3117 |
Preparation of Amphiphilic Acrylic Acid Copolymer and Its Application in Humidity-Sensitive Coatings
Wang RM, Wang JF, Lv WH, Guo JF, He YF, Jiang ML |
