| 2487 - 2495 |
Thermal Properties and Chemical Changes in Blend Melt Spinning of Cellulose Acetate Butyrate and a Novel Cationic Dyeable Copolyester
Chen B, Zhong LL, Gu LX |
| 2496 - 2503 |
A Study of the Mechanisms of Divalent Copper Binding to a Modified Cellulose Adsorbent
O'Connell DW, Aszalos B, Birkinshaw C, O'Dwyer TF |
| 2504 - 2514 |
Degradation of Aramid Fibers Under Alkaline and Neutral Conditions: Relations Between the Chemical Characteristics and Mechanical Properties
Derombise G, Van Schoors LV, Davies P |
| 2515 - 2525 |
Crystallization Studies on Linear Aliphatic Polyamides Derived From Naturally Occurring Carbohydrates
Fernandez CE, Bermudez M, Alla A, Mancera M, Garcia-Martin MG, Benito E, Roffe I, Galbis JA, Munoz-Guerra S |
| 2526 - 2535 |
Wheat Gluten Nanocomposite Films as Food-Contact Materials: Migration Tests and Impact of a Novel Food Stabilization Technology (High Pressure)
Mauricio-Iglesias M, Peyron S, Guillard V, Gontard N |
| 2536 - 2540 |
Synthesis of Novel Optically Active Pyrrolidine-Containing Polyaniline: A New Heterogeneous Organo Polymeric-Base Catalyst for Direct Aldol Reaction
Saravanan C, Palaniappan S |
| 2541 - 2547 |
Simulation of Polyester Melt Spinning with Axial Quench for Increasing Productivity
Sumesh PT, Mathur TP, Agarwal US |
| 2548 - 2556 |
Chitosan Modified MMT-Poly(AMPS) Nanocomposite Hydrogel: Heating Effect on Swelling and Rheological Behavior
Kabiri K, Mirzadeh H, Zohuriaan-Mehr MJ |
| 2557 - 2565 |
Influence of Polyfunctional Monomer on Melt Strength and Rheology of Long-Chain Branched Polypropylene by Reactive Extrusion
Su FH, Huang HX |
| 2566 - 2572 |
Synergism Effect Between Modified Carbon Black and Organic Ultraviolet Absorber in Polymer Matrix for Ultraviolet Protection
Shi QF, Gao JY, Zhao DD, Xu SA |
| 2573 - 2579 |
The Effect of Anionic Clay Particles on the Structure and Thermomechanical Behavior of Sodium Partially-Neutralized EMAA Ionomer
Ardanuy M, Velasco JI, Rodriguez-Perez MA, de Saja JA |
| 2580 - 2589 |
Synthesis of Thermosensitive Copolymer Beads Containing Pyridinium Groups and Their Antibacterial Activity
Nagasako T, Ogata T, Kurihara S, Nonaka T |
| 2590 - 2600 |
Microscopic Mechanical Properties and Injection Molding-Induced Morphology on Polypropylene Rubber Blend
Kobayashi Y, Ando M, Kanai T |
| 2601 - 2609 |
Preparation and Self-Assembly of Polyaniline Nanorods and Their Application as Electroactive Actuators
Kim SH, Oh KW, Choi JH |
| 2610 - 2616 |
Preparation of Polyacrylonitrile with Improved Isotacticity and Low Polydispersity
Jiang JG, Lu XY, Lu Y |
| 2617 - 2625 |
Gelatin-g-Poly(methyl methacrylate)/Silver Nanoparticle Hybrid Films and the Evaluation of Their Antibacterial Activity
Liu Y, Liu XH, Wang X, Yang JZ, Yang XJ, Lu LD |
| 2626 - 2637 |
Key Factors Affecting the Manufacture of Hydrophobic Ultrafiltration Membranes for Surface Water Treatment
Dang HT, Rana D, Narbaitz RM, Matsuura T |
| 2638 - 2644 |
Water Absorbance and Thermal Properties of Sulfated Wheat Gluten Films
Chiou BS, Robertson GH, Rooff LE, Cao T, Jafri H, Gregorski KS, Imam SH, Glenn GM, Orts WJ |
| 2645 - 2650 |
Studies on Shrinkage, Depth of Cure, and Cytotoxic Behavior of Novel Organically Modified Ceramic Based Dental Restorative Resins
Lizymol PP |
| 2651 - 2657 |
Immobilization of Alcohol Dehydrogenase on Films Prepared by the Electrochemical Copolymerization of Pyrrole and 1-(2-Carboxyethyl)pyrrole for Ethanol Sensing
Shimomura M, Kuwahara T, Iizuka K, Kinoshita T |
| 2658 - 2667 |
Crystallization Behavior of Poly(epsilon-caprolactone)/Layered Double Hydroxide Nanocomposites
Yang Z, Peng HD, Wang WZ, Liu TX |
| 2668 - 2673 |
Plasticization of Poly(arylene ether nitrile) by the Melt Blending of Phthalonitrile Prepolymer: A Rheological, Mechanical, and Thermal Study
Zhong JC, Jia K, Zhao R, Liu XB |
| 2674 - 2684 |
Effect of Poly(methyl methacrylate) Addition on the Dielectric and Energy Storage Properties of Poly(vinylidene fluoride)
Meng QJ, Li WJ, Zheng YS, Zhang ZC |
| 2685 - 2693 |
Melt Spinning of Poly(vinylidene fluoride) Fibers and the Influence of Spinning Parameters on beta-Phase Crystallinity
Lund A, Hagstrom B |
| 2694 - 2705 |
Polyurethane/Acrylate Hybrids: Effects of the Acrylic Content and Thermal Treatment on the Polymer Properties
Peruzzo PJ, Anbinder PS, Pardini OR, Costa CA, Leite CA, Galembeck F, Amalvy JI |
| 2706 - 2713 |
Mechanical and Functional Properties of Composites Based on Graphite and Carboxylated Acrylonitrile Butadiene Rubber
Yang J, Zhang LQ, Shi JH, Quan YN, Wang LL, Tian M |
| 2714 - 2722 |
Flammability and Mechanical Properties of Wood Flour-Filled Polypropylene Composites
Abu Bakar MB, Ishak ZAM, Taib RM, Rozman HD, Jani SM |
| 2723 - 2733 |
Photoinduced Cografting of Vinyl Benzyl Trimethylammonium Chloride and 2-Hydroxyethyl Methacrylate onto Nylon Nonwoven Fabric for Preparing an Anion-Exchange Sorbent: Optimum Cografting Conditions and Characterization
Na CK, Park HJ |
| 2734 - 2741 |
Characteristic Rheological Features of High Concentration PVA Solutions in Water with Different Degrees of Polymerization
Gao HW, He JY, Yang RJ, Yang L |
| 2742 - 2748 |
Preparation of O-Carboxymethyl-N-Trimethyl Chitosan Chloride and Flocculation of the Wastewater in Sugar Refinery
Li SQ, Zhou PJ, Yao PJ, Wei YA, Zhang YH, Yue W |
| 2749 - 2757 |
Preparation and Characterization of Interpenetrating Polymer Network Silicone Hydrogels with High Oxygen Permeability
Wang JJ, Li XS |
| 2758 - 2767 |
Relaxation Behavior of Conductive Carbon Black Reinforced Chlorosulfonated Polyethylene Composites
Nanda M, Tripathy DK |
| 2768 - 2774 |
Microbial Desulfurization for NR Ground Rubber by Thiobacillus ferrooxidans
Jiang GM, Zhao SH, Luo JY, Wang YQ, Yu WY, Zhang CR |
| 2775 - 2782 |
Synthesis and Properties of Electromagnetic Wave Shielding Polymer Materials with Low Flammability
Volkov VP, Zelenetsky AN, Shevchenko VG, Ponomarenko AT, Sizova MD |
| 2783 - 2792 |
Synthesis and Characterization of (Fe3O4/MWCNTs)/Epoxy Nanocomposites
Jones WD, Rangari VK, Hassan TA, Jeelani S |
| 2793 - 2801 |
Fluorinated Polypropylene Barrier Materials: Preparation and Characterization
Cheng S, Wen DJ |
| 2802 - 2807 |
New Melamine-Formaldehyde-Ketone Resins. VI. Preparation of Filled Molding Compositions and Compression-Molding Materials from Reactive Solvents Based on Cyclohexanone
Glowacz-Czerwonka D, Kucharski M |
| 2808 - 2815 |
Nanogels of Poly(acrylic acid): Uptake and Release Behavior with Fluorescent Oligothiophene-Labeled Bovine Serum Albumin
Argentiere S, Blasi L, Ciccarella G, Barbarella G, Cingolani R, Gigli G |
| 2816 - 2824 |
Microwave Assisted Polycondensation of Polyimides by [4,4'-(Hexafluoroisopropylidene)diphthalic anhydride, pyromellitic dianhydride] and [2,4,6-Trimethyl-m-phenylenediamine]. Power, Time, and Solvent Effect
Tellez HM, Alquisira JP, Lopez-Cortes JG, Alvarez-Toledano C |
| 2825 - 2832 |
Effect of Natural Polyphenols on Physicochemical Properties of Cross linked Gelatin-Based Polymeric Biocomposite
Haroun AA, El Toumy SA |
| 2833 - 2839 |
Studies on Polymeric Conservation Treatments of Ceramic Tiles with Paraloid B-72 and Two Alkoxysilanes
Constancio C, Franco L, Russo A, Anjinho C, Pires J, Vaz MF, Carvalho AP |
| 2840 - 2845 |
Melamine-Bridged Alkyl Resorcinol Modified Urea-Formaldehyde Resin for Bonding Hardwood Plywood
Hse CY, Higuchi M |
| 2846 - 2856 |
Design and Performance Evaluation of Multi layer Packaging Films for Blister Packaging Applications
Hwang SW, Shim JK, Lee SB, Auras R |
| 2857 - 2865 |
Macroporous Bead Modification with Polyethylenimines of Different Molecular Weights as Polycationic Ligands
Gonzalez NP, Strumia MC, Igarzabal CIA |
| 2866 - 2873 |
Preparation and Properties of Polylactide-Silica Nanocomposites
Zhu AP, Diao HX, Rong QP, Cai AY |
| 2874 - 2883 |
Influence of Starch and Glycerol on the Properties of Chitosan by Positron Annihilation Spectroscopy
Abd El Wahab M, Abdou ES |
| 2884 - 2892 |
Graft Polymerization of Acrylic Acid onto Polypropylene Monofilament by RF Plasma
Saxena S, Ray AR, Gupta B |
| 2893 - 2900 |
Synthesis and Application of Modified Starch as a Shell-Core Main Adhesive in a Foundry
Zhou X, Yang JZ, Qian F, Qu GH |
| 2901 - 2905 |
Coimmobilization of Malic Enzyme and Alanine Dehydrogenase on Organic-Inorganic Hybrid Gel Fibers and the Production of L-Alanine from Malic Acid Using the Fibers with Coenzyme Regeneration
Nakane K, Suye SI, Ueno T, Ohno Y, Ishikawa T, Ogihara T, Ogata N |
| 2906 - 2912 |
Effects of Membrane Thickness and Heat Treatment on the Gas Transport Properties of Membranes Based on P84 Polyimide
Shen Y, Lua AC |
| 2913 - 2919 |
Competitive Adsorption Between an AMPS (R)-Based Fluid Loss Polymer and Welan Gum Biopolymer in Oil Well Cement
Plank J, Lummer NR, Dugonjic-Bilic F |
| 2920 - 2929 |
Unique Stimuli Responsive Characteristics of Electron Beam Synthesized Bacterial Cellulose/Acrylic Acid Composite
Halib N, Amin MCIM, Ahmad I |
| 2930 - 2936 |
Enhancement of Dispersion of Carbon Nanotube and Physical Properties of Poly(styrene-co-acrylonitrile)/Multiwalled Carbon Nanotube Nanocomposite via Surface Initiated ATRP
Choi WS, Ryu SH |
| 2937 - 2943 |
Synthesis and Characterization of Novel Hybrid Polyoxazoline-Grafted Multiwalled Carbon Nanotubes
Jeon JH, Lee SH, Lim JH, Kim KM |
| 2944 - 2950 |
Preparation and In Vitro Drug-Release Behavior of 5-Fluorouracil-Loaded Poly(hydroxybutyrate-co-hydroxyhexanoate) Nanoparticles and Microparticles
Lu XY, Zhang YL, Wang L |
| 2951 - 2957 |
Kinetic Analysis of the Imidization of Poly(styrene-co-maleic anhydride) with Aniline in the Melt
Liu HY, Yao Z, Cao K, Li BG |
| 2958 - 2964 |
Properties of Water-Soluble Acrylic Copolymer/Montmorillonite Nanocomposites for Warp Sizing
Chen M, Zhu PX, Gao M, Du ZL, Chen Y, Zhou DL, Jian YL |
| 2965 - 2969 |
Mechanical and Antibacterial Properties of Modified Nano-ZnO/High-Density Polyethylene Composite Films with a Low Doped Content of Nano-ZnO
Li SC, Li YN |
| 2970 - 2975 |
Cadmium and Copper Absorption Mediated by a Poly(vinyl alcohol)-b-Polyacrylonitrile Based Micelle/Trichosporon cutaneum Cell System
Georgieva N, Bryaskova R, Debuigne A, Detrembleur C |
| 2976 - 2981 |
Investigation on Synergic Activity of N-Benzylimine Aminothioformamide Binary Accelerator System in Sulfur Vulcanization of Natural Rubber
Thomas SP, Ettoli MJ |
| 2982 - 2989 |
Preparation and Sorption Studies of beta-Cyclodextrin/Epichlorohydrin Copolymers
Pratt DY, Wilson LD, Kozinski JA, Mohart AM |
| 2990 - 2997 |
The Effect of Water-Soluble Polymers on Rheology of Microfibrillar Cellulose Suspension and Dynamic Mechanical Properties of Paper Sheet
Vesterinen AH, Myllytie P, Laine J, Seppala J |
| 2998 - 3004 |
Poly(ethylene-co-vinyl alcohol) and Nylon 6/12 Nanofibers Produced by Melt Electrospinning System Equipped with a Line-Like Laser Beam Melting Device
Shimada N, Tsutsumi H, Nakane K, Ogihara T, Ogata N |
| 3005 - 3012 |
Effects of Fiber Characteristics on the Mechanical and Rheological Properties of Poly(butylene terephthalate)/Glass Fiber Composites
Jang SH, Kim YH, Lim S, Choi GD, Kim SH, Kim WN |
| 3013 - 3020 |
Solution Properties of Hyaluronic Acid and Comparison of SEC-MALS-VIS Data with Off-Line Capillary Viscometry
Podzimek S, Hermannova M, Bilerova H, Bezakova Z, Velebny V |
| 3021 - 3026 |
Surprising Performance of Alginate Beads for the Release of Low-Molecular-Weight Drugs
Elnashar MM, Yassin MA, Moneim AEFA, Bary EMA |
| 3027 - 3034 |
Influence of In Situ Compatibilization on In Situ Formation of Low-Density Polyethylene/Polyamide 6 Blends by Reactive Extrusion
Fang H, Yang GS |
| 3035 - 3039 |
Study on Properties of a Novel Photosensitive Polysiloxane Urethane Acrylate for Solder Mask
Sun F, Jiang SL |
| 3040 - 3046 |
Hemodialysis Membrane Prepared from Cellulose/N-Methylmorpholine-N-oxide Solution. IV. Comparative Studies on the Surface Morphology of Membranes Prepared from N-Methylmorpholine-N-oxide and Cuprammonium Solutions
Abe Y, Mochizuki A |
| 3047 - 3055 |
Synthesis and Rheological Behavior of Hydrophobically Modified Block Copolymers
Rodrigues JD, Nascimento RSV |
| 3056 - 3069 |
Phase Separation and Mechanical Properties of Polyketone/Polyamide Polymer Alloys
Kato A, Nishioka M, Takahashi Y, Suda T, Sawabe H, Isoda A, Drozdoya O, Hasegawa T, Izumi T, Nagata K, Hikasa S, Iwabuki H, Asano A |
| 3070 - 3078 |
Influence of the Matrix Porosity on the Synthesis and Adsorption Behavior of Dithiocarbamate Styrenic Resins Toward Zinc(II) and Cadmium(II) Ions
da Costa PA, Teixeira VG |
| 3079 - 3086 |
Mechanochemical Preparation of a Novel Polymeric Photostabilizer for Poly(vinyl chloride)
Zhang XF, Zhao TB, Pi H, Guo SY |
| 3087 - 3094 |
Positron Lifetime Spectroscopy and Differential Scanning Calorimetric Study of Polystyrene-Based Composites with Fly Ash, Cenospheres, and Calcium Aluminosilicate as Fillers
Altaweel AMAM, Ranganathaiah C, Siddramaiah B |
| 3095 - 3102 |
Synthesis and Characterization of Maleic Acid Polymer for Use as Scale Deposits Inhibitors
Benbakhti A, Bachir-Bey T |
| 3103 - 3110 |
Synthesis and Distribution of Structural Units-Thermal Property Relationship of Random and Block Butadiene-Styrene Copolymers with High Trans 1,4 Units Content Produced Using an Initiator Composed of Alkyl Aluminum, n-Butyl Lithium, and Barium Alkoxide
Benvenuta-Tapia JJ, Tenorio-Lopez JA, Herrera-Najera R, Rios-Guerrero L |
