| 2709 - 2713 |
Characterization of the conformational changes of partially hydrolyzed polyacrylamide chains in solution using stress recovery experiment
Zhao F, Du YK, Liu SF, Xu JK, Tang JA |
| 2714 - 2724 |
Influence of processing on ethylene propylene block copolymers (II): Fracture behavior
Gamez-Perez J, Munoz P, Santana OO, Gordillo A, Maspoch ML |
| 2725 - 2731 |
Overall properties of fibrillar silicate/styrene-butadiene rubber nanocomposites
Tian M, Cheng LJ, Liang WL, Zhang LQ |
| 2732 - 2748 |
Contributions to characterization of poly(vinyl chloride)-lignin blends
Banu D, El-Aghoury A, Feldman D |
| 2749 - 2753 |
Effect of interfacial attraction on intercalation in polymer/clay nanocomposites
Lee SS, Hur MH, Yang HC, Lim S, Kim J |
| 2754 - 2764 |
Curing behavior, mechanical properties, intermolecular interaction, and morphology of silicone/polypyrrole/polymer electrolyte composites
Chiu HT, Wu JH |
| 2765 - 2775 |
Dielectric analysis for in-situ monitoring of gelatin renaturation and crosslinking
Lefebvre DR, Han J, Lipari JM, Long MA, McSwain RL, Wells HC |
| 2776 - 2783 |
Crystallization and melting behavior of blends comprising poly(3-hydroxy butyrate-co-3-hydroxy valerate) and poly(ethylene oxide)
Tan SM, Ismail J, Kummerlowe C, Kammer HW |
| 2784 - 2792 |
Cure behavior of DGEBA vinyl ester-styrene resins near silane-treated interfaces
Brill RP, Palmese GR |
| 2793 - 2797 |
Pyrolysis of an amorphous copolyester
Yu AF, Huang XA |
| 2798 - 2809 |
Physical and mechanical properties of flexible polybenzoxazine resins: Effect of aliphatic diamine chain length
Allen DJ, Ishida H |
| 2810 - 2813 |
Fabrication and characterization of a persimmon leaves (PL)/poly(acrylonitrile) (PAN) blend bio-fiber
Li DL, Shen Q, Ding HG, Gu QF, Wang ZX |
| 2814 - 2818 |
Study of comparative tracking index on brominated epoxy and its application in copper clad laminates
Chiu HT, Cheng MF |
| 2819 - 2824 |
Functionalization of irradiated PTFE micropowder with methacryl- or hydroxy groups for chemical coupling of PTFE with different matrix polymers
Klupfel B, Lehmann D |
| 2825 - 2837 |
Phase interactions and structure evolution of heterophasic ethylene-propylene copolymers as a function of system composition
Doshev P, Lohse G, Henning S, Krumova M, Heuvelsland A, Michler G, Radusch HJ |
| 2838 - 2846 |
Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin
Kara A, Acemioglu B, Alma MH, Cebe M |
| 2847 - 2853 |
The rheological behavior of EPDM Nordel IF and POE engage produced by CGC and INSITE (TM) technology
Wu QY, Li P, Mu JX, Zhang N, An P, Wu JG |
| 2854 - 2864 |
Novel organosoluble poly(amide-imide-imide)s synthesized from new tetraimide-dicarboxylic acid by condensation with 4,4'-oxydiphthalic anhydride, 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene, trimellitic anhydride, and various aromatic diamines
Yang CP, Chen YP, Woo EM |
| 2865 - 2870 |
Removal of chromium(VI) from aqueous solutions using poly(4-vinyl pyridine) beads
Arslan M, Yigitoglu M, Soysal A |
| 2871 - 2878 |
Poly(aspartic-acid) derivatives as polymeric micelle drug delivery systems
Jiang TY, Wang ZY, Chen C, Mo FK, Xu YL, Tang LX, Liang JJ |
| 2879 - 2883 |
Synthesis and properties of polyurethane/clay nanocomposite by clay modified with polymeric methane diisocyanate
Seo WJ, Sung YT, Han SJ, Kim YH, Ryu OH, Lee HS, Kim WN |
| 2884 - 2897 |
Molecular transport of aliphatic hydrocarbons through styrene butadiene rubber/ethylene vinyl acetate blends
Padmini M, Radhakrishnan CK, Sujith A, Unnikrishnan G, Purushothaman E |
| 2898 - 2910 |
Graft copolymerization and characterization of 2-hydroxyethyl methacrylate onto jute fiber by photoirradiation
Khan F, Ahmad SR |
| 2911 - 2918 |
Three-dimensional nonisothermal simulation of a coat hanger die
Wu TQ, Jiang B, Xu SH, Huang NB |
| 2919 - 2926 |
Processing and morphology of molecularly imprinted nylon thin films
Richter A, Gibson UJ, Nowicki M, BelBruno JJ |
| 2927 - 2937 |
Synthesis of an alginate-poly(sodium acrylate-co-acrylamide) superabsorbent hydrogel with low salt sensitivity and high pH sensitivity
Marandi GB, Sharifnia N, Hosseinzadeh H |
| 2938 - 2943 |
New approach to antibacterial treatment of cotton fabric with silver nanoparticle-doped silica using sol-gel process
Tarimala S, Kothari N, Abidi N, Hequet E, Fralick J, Dai LL |
| 2944 - 2952 |
Morphology of polyvinylidene fluoride and its blend in thermally induced phase separation process
Li XF, Lu XL |
| 2953 - 2959 |
Study on the rheological behavior of the hydrophobically modified hydroxyethyl cellulose with 1,2-epoxyhexadecane
Ye L, Li Q, Huang RH |
| 2960 - 2966 |
HEMA-grafted chitosan for dialysis membrane applications
Radhakumary C, Nair PD, Mathew S, Nair CPR |
| 2967 - 2971 |
Studies on the effects of the enzymatic treatment on silk fine powder
Xu WL, Ke GZ, Peng XQ |
| 2972 - 2976 |
Rheological kinetics of acrylonitrile/amino ethyl-2-methyl propenoate copolymer solutions in dimethyl sulfoxide
Hou C, Qu RJ, Ji CN, Ying L |
| 2977 - 2985 |
Transetherification of melamine-formaldehyde resin methyl ethers and competing reaction of self-condensation
Pavlyuchenko VN, Ivanchev SS, Ratzsch M, Bucka H, Primachenko ON, Leitner P, Khaikin SY |
| 2986 - 2994 |
Studies on urethane-allophanate networks based on hydroxyl-terminated polybutadiene: Modeling of network parameters and correlation to mechanical properties
Sekkar V, Narayanaswamy K, Scariah KJ, Nair PR, Sastri KS, Ang HG |
| 2995 - 3008 |
Poly(methacrylamide-co-acrylic acid) hydrogels for gastrointestinal delivery of theophylline. I. Swelling characterization
Dubey S, Bajpai SK |
| 3009 - 3022 |
Processes involved during radiation grafting of N-vinyl pyrrolidone onto poly(ethylene terephthatate) fabric
El-Gendy EH, Ali NM, El-Shanshoury IA |
| 3023 - 3032 |
Curing kinetics and thermal property characterization of o-CFER/MeTHPA/O-MMT nanocomposite
Gao JG, Zhao M, Li G |
| 3033 - 3039 |
Effect of talc on the properties of polypropylene/ethylene/propylene/diene terpolymer blends
Oksuz M, Eroglu M, Yildirim H |
| 3040 - 3045 |
Thermally stimulated depolarization current behavior of polyethylene/poly(vinyl acetate) blends: Effect of blending
Choure C, Keller JM, Bajpai R |
| 3046 - 3052 |
Thermoplastic vulcanizates based on expoxidized natural rubber/polypropylene blends: Effect of epoxide levels in ENR molecules
Nakason C, Wannavilai P, Kaesaman A |
| 3053 - 3061 |
The effect of process variables on the morphology and release characteristics of protein-loaded PLGA particles
Yushu H, Venkatraman S |
| 3062 - 3066 |
Mechanical and thermal properties of ABS and leather waste composites
Ramaraj B |
| 3067 - 3072 |
Thermal degradation of poly(ethylene oxide) and polyacrylamide with ascorbic acid
Vijayalakshmi SP, Raichur A, Madras G |
| 3073 - 3075 |
Determination of solution viscosity characteristics of rubber seed oil based alkyds resins
Ikhuoria EU, Aigbodion AI |
| 3076 - 3089 |
Characterization of biodegradable polymers by inverse gas chromatography. II. Blends of amylopectin and poly(epsilon-caprolactone)
Al-Ghamdi A, Melibari M, Al-Saigh ZY |
| 3090 - 3096 |
Synthesis of sulfonated rubber ionomers by the ring-opening reaction of epoxidized styrene-butadiene rubber, their characterization, and their properties
Xie HQ, Chen Y, Yang W, Xie D |
| 3097 - 3105 |
Functionalization of low-molecular-weight oligomer dienes and olefins with sulfur- and oxygen-containing compounds
Biglova RZ, Galimzyanova AU, Dokichev VA, Konesev GV, Zaikov GE, Talipov RF |
| 3106 - 3113 |
Effects of metallic monomer powders on the mechanical properties of hardened polyester and acrylic polymer concrete
Ahn N |
| 3114 - 3120 |
Dynamic interfacial tension between a thermotropic liquid-crystalline polymer and a flexible polymer
Yu RB, Yu W, Zhou CX, Feng JJ |
| 3121 - 3124 |
Self-assembled honeycomb polyurethane nanofibers
Thandavamoorthy S, Gopinath N, Ramkumar SS |
| 3125 - 3130 |
Gelatin/tannin complex nanospheres via molecular assembly
Yi KJ, Cheng GX, Xing FB |
| 3131 - 3142 |
Functionalization of wood particles through a reactive extrusion process
Carlborn K, Matuana LM |
| 3143 - 3150 |
Synthesis of unsaturated polyesters of increased solubility in styrene
Matynia T, Worzakowska M, Tamawski W |
| 3151 - 3160 |
Curing characteristics and mechanical properties of alkali-treated grass-fiber-filled natural rubber composites and effects of bonding agent
De D, De D, Adhikari B |
| 3161 - 3167 |
Correlations between processing parameters, morphology, and properties of blown films of linear low-density polyethylene/low-density polyethylene blends. I. Crystalline biaxial orientation by IR and mechanical properties
Branciforti MC, Pimentel R, Bernardi A, Bretas RES |
| 3168 - 3174 |
Synthesis, characterization, and curing of {2,6-bis-[2-(bis-oxiranylmethyl-amino)-methylbenzyl]-phenyl}-bis-oxirany lmethylamine (BPBOMA)
Maity T, Samanta BC, Dalai S, Banthia AK |
| 3175 - 3182 |
Tensile strength and its variation of PAN-based carbon fibers. I. Statistical distribution and volume dependence
Yu WD, Yao JW |
| 3183 - 3191 |
Composite of low-density polyethylene and aluminum obtained from the recycling of postconsumer aseptic packaging
Lopes CMA, Felisberti MI |
| 3192 - 3201 |
Hydroxybisphosphonate-containing polymeric drug-delivery systems designed for targeting into bone tissue
Hruby M, Etrych T, Kucka J, Forsterova M, Ulbrich K |
| 3202 - 3214 |
Preparation and swelling behavior of macroporous poly(acrylamide-co-sodium methacrylate) superabsorbent hydrogels
Mohan YM, Murthy PSK, Raju KM |
| 3215 - 3226 |
Tensile behavior of symmetrical laminates made of PCBA and PMMA layers
Papadopoulos GA, Sideridis E |
| 3227 - 3232 |
State of water in chitosan-PVA hydrogel
Wang T, Gunasekaran S |
| 3233 - 3240 |
Syntheses of triblock polybutadiene-polydimethylsiloxane copolymers by coupling reactions
Hetflejs J, Sabata S, Podesva J, Netopilik M, Latalova P, Spevacek J |
| 3241 - 3250 |
Polynitroalcohols obtained through nitro aldol reaction between nitro oligomers and C-1-C-2-aldehydes
Karaivanova MS, Nedelchev NM |
| 3251 - 3263 |
Characteristics of cellulose isolated by a totally chlorine free method from Caragana korshinskii
Xu F, Sun RC, Lu Q |
| 3264 - 3269 |
Effect of chitosan addition to BTCA/CA processed cotton fabrics for adsorbing metallic ions from waste water
Hsieh SH, Lin ES, Wei HC |
| 3270 - 3274 |
Influence of the nigrosine dye on the thermal behavior of polyamide 66
Sukata K, Takeuchi H, Shimada M, Agari Y |
| 3275 - 3285 |
Improvement of optical quality and vibration characteristics of injection molded disk with processing condition control
Nam JG, Sin HC, Na SS |
| 3286 - 3290 |
Assembly of polyelectrolyte multilayers on nylon fibers
Dubas ST, Limsavarn L, Iamsamai C, Potiyaraj P |
| 3291 - 3300 |
Mechanical properties of injection-molded isotactic polypropylene/roselle fiber composites
Junkasem J, Menges J, Supaphol P |
| 3301 - 3306 |
Compositional differences of propylene-ethylene block copolymers manufactured by degradation and hydrogenation techniques
Zhang CZ, Yu FS, Wang LQ, Tu KH |
| 3307 - 3316 |
Isothermal and nonisothermal crystallization kinetics of isotactic polypropylene nucleated with substituted aromatic heterocyclic phosphate salts
Zhang YF, Xin Z |
| 3317 - 3323 |
Ethylene polymerization by alkylidene-bridged asymmetric dinuclear titanocene/MAO systems
Lin F, Sun JQ, Liu XJ, Lang WK, Xiao XH |
| 3324 - 3329 |
Sodium alginate-poly(hydroxyethylmethacrylate) interpenetrating polymeric network membranes for the pervaporation dehydration of ethanol and tetrahydrofuran
Veerapur RS, Gudasi KB, Patil MB, Babu VR, Bhat SD, Sairam M, Aminabhavi TM |
| 3330 - 3335 |
Thermal stability of poly(ethylene-co-trimethylene terephthalate)s
Wei GF, Hua DB, Gu LX |
| 3336 - 3342 |
Specially elaborated thermally induced phase separation to fabricate poly(L-lactic acid) scaffolds with ultra large pores and good interconnectivity
Gong YH, Ma ZW, Gao CY, Wang W, Shen JC |
| 3343 - 3347 |
Surface free energy analysis of poly(HEMA)poly(perfluoroacrylate) copolymer networks
Eroglu MS |
| 3348 - 3356 |
Gas barrier changes and structural alterations induced by retorting in a high barrier aliphatic polyketone terpolymer
Lopez-Rubio A, Gimenez E, Gavara R, Lagaron JM |
| 3357 - 3360 |
Intensification of dust removal process
Panov AK, Usmanova RR, Zaikov VG, Zaikov GE |
| 3361 - 3366 |
Property transitions in high-density polyethylene/maleated poly(ethylene-octene)/calcium carbonate ternary composites
Xie TX, Liu HZ, Ou YC, Yang GS |
| 3367 - 3375 |
Increase in flame retardance of glass-epoxy laminates without halogen or phosphorous compounds by simultaneous use of incombustible-gas generator and charring promoter
Kiuchi Y, Iji M, Nagashima H, Miwa T |
| 3376 - 3380 |
Color evaluation of wool fabric dyed with Rhizoma coptidis extract
Ke GZ, Yu WD, Xu WL |
| 3381 - 3386 |
Effects of various fillers on CEM-1 laminate punchability
Chiu HT, Cheng MF |
| 3387 - 3394 |
Rheological properties and foam processibility of precured EPDM
Wang BQ, Peng ZL, Zhang Y, Zhang YX |
| 3395 - 3401 |
Rheological properties of PDMS filled with CaCO3: The effect of filler particle size and concentration
Zhou YB, Wang SF, Zhang Y, Zhang YX, Jiang XH, Yi DF |
| 3402 - 3407 |
Superior real time method to evaluate photo-curing resin by means of rigid-body pendulum rheometer
Chiu HT, Cheng MF |
| 3408 - 3414 |
Fine characterization of plasma-polymerized films from a methane/air mixture
Mori M, Izumi H, Nakagawa K, Nakamoto T, Mori T, Kawashimo Y, Ueda Y |
| 3415 - 3421 |
Nylon 6/CB polymeric conductive plastic bipolar plates for PEM fuel cells
Chen CK, Kuo JK |
| 3422 - 3429 |
Effect of charge density, molecular weight, and hydrophobicity on polycations adsorption and flocculation of polystyrene latices and silica
Schwarz S, Bratskaya S, Jaeger W, Paulke BR |
| 3430 - 3436 |
Synthesis and characterization of hyperbranched poly(silyl ester)s
Han NF, Liu ZL, Jin LQ |
| 3437 - 3441 |
A rheology study of high-energy radiolysis of a semicrystalline ethylene-propylene copolymer containing DOP mobilizer
Fuzail M, Hill DJT, Park Y, Halley P |
| 3442 - 3447 |
CaCO3/natural rubber latex nanometer composite and its properties
Deng CM, Chen M, Ao NJ, Yan D, Zheng ZQ |
| 3448 - 3454 |
Biocidal hydantoinylsiloxane polymers. IV. N-halamine siloxane-functionalized silica gel
Liang J, Owens JR, Huang TS, Worley SD |
| 3455 - 3461 |
Synthesis and characterization of fluorine and nitrile containing polyimides
Raju MP, Alam S |
| 3462 - 3467 |
Poly(1,3-disila-1,3-diphenyl-2-oxaindane)-diphenylsiloxane-poly(dimethyl siloxane) block copolymers
Mukbaniani O, Matsaberidze M, Achelashvili V, Mukbaniani N, Samsonia A |
| 3468 - 3478 |
Hydroxyalkylation of barbituric acid. I. Hydroxymethyl derivatives of barbituric acid - Precursors of polyetherols with a pyrimidine ring
Slaczka A, Lubczak J |
| 3479 - 3486 |
Encapsulation of titanium dioxide in styrene/n-butyl acrylate copolymer by miniemulsion polymerization
Al-Ghamdi GH, Sudol ED, Dimonie VL, El-Aasser MS |
| 3487 - 3492 |
Ammonia-gas and liquid ammonia treatments of silk fabric
Lee MS, Lee M, Tokuyama T, Wakida T, Inoue G, Ishida S |
| 3493 - 3496 |
Preparation and electroresponsive property of poly(vinyl alcohol)/Sodium alginate composite hydrogel
Li RX, Zhang XZ, Zhao JS, Wu JM, Guo Y, Guan J |
| 3497 - 3502 |
Structure and processability of iodinated poly(vinyl alcohol) (III)-structure of films iodinated in solution before casting
Shin EJ, Lee YH, Choi SC |
| 3503 - 3510 |
Curing of epoxy resin using imide-amines
Sharma P, Choudhary V, Narula AK |
| 3511 - 3519 |
The swelling behavior of interpenetrating polymer networks composed of polyurethane and unsaturated polyester
Krol P, Wojturska J |
| 3520 - 3528 |
Binding behavior of Fe3+ ions on ion-imprinted polymeric beads for analytical applications
Saatcilar O, Satiroglu N, Say R, Bektas S, Denizli A |
| 3529 - 3536 |
Mechanical and morphological properties of carbon fiber reinforced-modified epoxy composites
Guduri BR, Luyt AS |
| 3537 - 3549 |
Electrical/mechanical properties and activation energies of some poly(2-vinylpyridine)-metal complexes
Dimitry OIH, Mazrouaa AM, Saad ALG |
| 3550 - 3558 |
Synthesis of polymeric nanofiber and polymeric nanosphere by living free radical polymerization
Lee JH, Liao YT |
| 3559 - 3563 |
Suspension copolymerization of styrene and divinylbenzene: Formation of beads
Gupta DC, Beldar AG, Tank R |
