| 997 - 1002 |
Characterization and catalytic activity of polymer supported ruthenium Schiff base complexes towards catechol oxidation
Pearly SC, Sridevi N, Yusuff KKM |
| 1003 - 1011 |
Thermosetting polyurethane multiwalled carbon nanotube composites
McClory C, McNally T, Brennan GP, Erskine J |
| 1012 - 1017 |
Block copolymers of cyclohexene oxide and ketonic resins via condensation and promoted cationic polymerization
Ergun S, Kizilcan N, Onen A |
| 1018 - 1024 |
Self-assembly of pH-responsive acrylate latex particles at emulsion droplets interface
He XD, Ge XW, Liu HR, Deng MG, Zhang ZC |
| 1025 - 1030 |
Effects of amphoteric covolvmer structure on the properties of barium titanate suspensions
Chen CH, Hsu KC |
| 1031 - 1041 |
PTC effect in HDPE filled with carbon blacks modified by ni and au metallic particles
Pourabbas B, Peighambardoust SJ |
| 1042 - 1052 |
Thermosetting foam with a high bio-based content from acrylated epoxidized soybean oil and carbon dioxide
Bonnaillie LM, Wool RP |
| 1053 - 1062 |
Influence of solid particles on cavitation in poly(methylene oxide) during crystallization
Nowacki R, Piorkowska E |
| 1063 - 1076 |
Degradation of a poly(ester urethane) elastomer. IV. Sorption and diffusion of water in PBX 9501 and its components
Salazar MR, Thompson SL, Laintz KE, Meyer TO, Pack RT |
| 1077 - 1085 |
Surface modification of a polyurethane film by low pressure glow discharge oxygen plasma treatment
Sanchis MR, Calvo O, Fenollar O, Garcia D, Balart R |
| 1086 - 1092 |
Studies of chitosan. 1. Preparation and characterization of chitosan/poly(vinyl alcohol) blend films
Chen CH, Wang FY, Mao CF, Yang CH |
| 1093 - 1100 |
Effects of meta and para diamines on the properties of polyetherimide nanocomposite films prepared by the sol-gel process
Chen BK, Fang YT, Cheng JR, Tsay SY |
| 1101 - 1117 |
Dielectric relaxation in vinylidene fluoride-hexafluoropropylene copolymers
Kochervinskii VV, Malyshkina IA, Markin GV, Gavrilova ND, Bessonova NP |
| 1118 - 1126 |
Preparation and dynamic mechanical properties of polyurethane-modified epoxy composites filled with functionalized fly ash particulates
Wu GH, Gu J, Zhao X |
| 1127 - 1132 |
Melt-electrospinning of poly(ethylene terephthalate) and polyalirate
Ogata N, Shimada N, Yamaguchi S, Nakane K, Ogihara T |
| 1133 - 1143 |
High molecular weight polypropylene nanospheres: Synthesis and characterization
Paik P, Kar KK |
| 1144 - 1155 |
Effects of urea and curing catalysts added to the strand board core-layer binder phenol-formaldehyde resin
Lee SM, Kim MG |
| 1156 - 1161 |
Preparation and self-assembly of poly(diglycidyl maleate-co-stearyl methacrylate)
Yu HJ, Wang L, Zhou JF, Dong XC, Jiang GH |
| 1162 - 1167 |
Preparation and application of polybenzoxazine adsorption resin
Xu YM, Zheng XS, Zhang JH |
| 1168 - 1176 |
Preparation and properties of waterborne polyurethane-urea/sodium alginate blends for high water vapor permeable coating materials
Yun JK, Yoo HJ, Kim HD |
| 1177 - 1187 |
Solution dynamics of the dextran/crosslinking agent systems
Ozdemir C, Colak N, Guner A |
| 1188 - 1199 |
Diimide hydrogenation of natural rubber latex
Mahittikul A, Prasassarakich P, Rempel GL |
| 1200 - 1209 |
Influence of organophilic montmorillonite and polypropylene on the rheological behaviors and mechanical properties of ultrahigh molecular weight polyethylene
Gai JG, Li HL |
| 1210 - 1220 |
Development of environmentally responsive hydrogels with metal affinity behavior
Iyer G, Yoon YS, Coleman MR, Nadarajah A |
| 1221 - 1227 |
Effect of DMSO/H2O coagulation bath on the structure and property of polyacrylonitrile fibers during wet-spinning
Dong XG, Wang CG, Bai YJ, Cao WW |
| 1228 - 1236 |
Synthesis and characterization of dense and porous cellulose films
Khare VP, Greenberg AR, Kelley SS, Pilath H, Roh IJ, Tyber J |
| 1237 - 1243 |
Morphology and mechanical properties of ABS blends prepared from emulsion-polymerized PB-g-SAN impact modifier with AIBN as initiator
Zhang N, Bao XX, Tan ZY, Sun SL, Zhou C, Yang HD, Zhang HX |
| 1244 - 1250 |
Emulsifier-free miniemulsion polymerization of styrene and the investigation of encapsulation of nanoparticles with polystyrene via this procedure using an anionic initiator
Faridi-Majidi R, Sharifi-Sanjani N |
| 1251 - 1260 |
Porous dye affinity beads for albumin separation from human plasma
Akgol S, Tuzmen N, Denizli A |
| 1261 - 1266 |
Surface properties of reverse osmosis membrane
Yao YY, Guo SW, Zhang YX |
| 1267 - 1274 |
Preparation and characterization of polyamide nanofiltration composite membranes with TiO2 layers chemically connected to the membrane surface
Mo J, Son SH, Jegal J, Kim J, Lee YH |
| 1275 - 1279 |
Alginates as binding matrix for bio-molluscicides against harmful snails Lymnaea acuminata
Singh A, Singh DK, Kushwaha VB |
| 1280 - 1288 |
Synthesis and characterization of cardanol-grafted natural rubber - The solution technique
Vikram T, Nando GB |
| 1289 - 1296 |
Comparison of model-fitting kinetics for predicting the cure behavior of commercial phenol-formaldehyde resins
Wang JW, Laborie MPG, Wolcott MP |
| 1297 - 1308 |
Study of the effects of melt blending speed on the structure and properties of phosphate glass/polyamide 12 hybrid materials
Urman K, Iverson D, Otaigbe JU |
| 1309 - 1315 |
Localized compatibilization in immiscible blends of thermoplastic polyurethane and ethylene-octylene copolymer
Jia SW, Xu DC, Bi YM, Ming QZ, Min ZR |
| 1316 - 1330 |
Applications of rheological torque-time curves to the study of thermooxidative degradation of polypropylene powder
Wang X, Chen XY, Yu WC, Ji YD, Hu XB, Xu JR |
| 1331 - 1335 |
Preparation and characterization of micron-sized magnetic microspheres by one-step suspension polymerization
Liu ZL, Liu CC, Yao KL, Liu PD, Ning Q |
| 1336 - 1343 |
Radiation-induced graft copolymerization of cellulosic fabric waste and its application in the removal of cyanide and dichromate from aqueous solution
El-Kelesh NA, Abd Elaal SE, Hashem A, Sokker HH |
| 1344 - 1350 |
Synthesis and characterization of poly(pyridylurea) and poly(pyridylthiourea), potentially semiconducting polymers
Diaz FR, Godoy A, Moreno J, Bernede JC, Del Valle MA, Tagle LH, East GA |
| 1351 - 1355 |
In situ synthesis of iron oxide nanoparticles on poly(ethylene oxide) nanofibers through an electrospinning process
Faridi-Majidi R, Sharifi-Sanjani N |
| 1356 - 1365 |
Synthesis, characterization, and thermal stability of azomethine oligomer and its metal complexes
Kaya I, Bilici A |
| 1366 - 1376 |
Metal-polymer nanocomposites produced by the melt-compounding interaction of an aliphatic polyamide with metal particles
Pesetskii SS, Jurkowski B, Krivoguz YM, Davydov AA, Bogdanovich SP |
| 1377 - 1384 |
Modification of the physical, mechanical, and thermal properties of poly(vinyl chloride) by blending with poly(ethyl methacrylate)
Chakrabarti R, Chakraborty D |
| 1385 - 1390 |
Preparation and characterization of polystyrene modified single-walled carbon nanotube
Wang GJ, Dong Y, Liu L, Zhao CX |
| 1391 - 1399 |
Effect of soft segment composition on the physical properties of nonionic aqueous polyurethane containing side chain PEGME
Yen MS, Tsai HC, Hong PD |
| 1400 - 1411 |
Properties of poly(urea-formaldheyde) microcapsules containing an epoxy resin
Cosco S, Ambrogi V, Musto P, Carfagna C |
| 1412 - 1419 |
Synthesis of SBR/PMMA core/shell latices: The role of initiator and surfactant on particle morphology and instability performance
Moghbeli MR, Mohammadi N, Bagheri R |
| 1420 - 1425 |
Processing of mica/epoxy nanocomposites by ultrasound mixing
Boukerrou A, Duchet J, Fellahi S, Sautereau H |
| 1426 - 1436 |
Polymerization of methacryl and triethoxysilane functionalized stearate ester: Titanium dioxide a composite films and their photocatalytic degradations
Eren T, Okte AN |
| 1437 - 1443 |
Synthesis of ethyl propionate catalyzed by poly(N-AEAAm-co-AAc)-cl-MBAm hydrogel-immobilized lipase of Bacillus coagulans MTCC-6375
Kanwar SS, Kaushal RK, Aggarwal A, Chauhan S, Chimni SS, Chauhan GS |
| 1444 - 1455 |
Ionic elastomer blends of zinc salts of maleated natural rubber and carboxylated nitrile rubber: Effect of grafted maleic anhydride
Lopattartanon N, Kraibut A, Sangjan R, Seadan M |
| 1456 - 1465 |
Synthesis of lamellar isobutyl silicates and dispersion in polypropylene melts
Chastek TT, Que EL, Jarzombeck P, Macosko CW, Stein A |
| 1466 - 1470 |
Synergistic effect of photo- and chemical treatment on the rate of biodegradation of low density polyethylene by fusarium sp AF4
Hasan F, Shah AA, Hameed A, Ahmed S |
| 1471 - 1479 |
Vapor diffusion in porous/nonporous polymer coatings by dielectric sorption analysis
Penon MG, Picken SJ, Wubbenhorst M, van Turnhout J |
| 1480 - 1489 |
Preparation of fructose-mediated (polyethylene glycol/chitosan) membrane and adsorption of heavy metal ions
Wang JW, Kuo YM |
| 1490 - 1495 |
The anti-static poly(ethylene terephthalate) nanocomposite fiber by in situ polymerization: The thermo-mechanical and electrical properties
Chen XL, Li CZ, Shao W, Du HL, Burnell-Gray JS |
| 1496 - 1502 |
Preparation of porous PVDF membrane via thermally induced phase separation with diluent mixture of DBP and DEHP
Ji GL, Du CH, Zhu BK, Xu YY |
| 1503 - 1510 |
Preparation of superhydrophobic silica-based films by using polyethylene glycol and tetraethoxysilane
Chang KC, Chen YK, Chen H |
| 1511 - 1520 |
Crystallization behavior and mechanical properties of bio-based green composites based on poly(L-lactide) and Kenaf fiber
Pan PJ, Zhu B, Kai WH, Serizawa S, Iji M, Inoue Y |
| 1521 - 1532 |
Influence of processing conditions on the morphological and mechanical properties of compatibilized PP/LCP blends
Filipe S, Maia JM, Leal CR, Cidade MT |
| 1533 - 1542 |
A novel potential cationic polymeric gene vector containing hydroxy groups and all grades of amino groups
Wu CB, Hao JY, Deng XM, Liu Y |
| 1543 - 1550 |
Synthesis and polyelectrolyte behavior of poly(methacrylic acid) star polymers
Furukawa T, Uchida S, Ishizu K |
| 1551 - 1558 |
Radiation-induced graft polymerization of glycidyl methacrylate onto PE/PP nonwoven fabric and its modification toward enhanced amidoximation
Kavakli PA, Seko N, Tamada M, Guven G |
| 1559 - 1565 |
Novel antibacterial composite of coal/LLDPE loaded with silver ions
Zhou AN, Yu ZJ |
| 1566 - 1574 |
Pervaporation separation of water/ethanol mixture by poly(phenylene oxide) and sulfonated poly(phenylene oxide) membranes
Shih CY, Chen SH, Liou RM, Lai JY, Chang JS |
| 1575 - 1580 |
An iron-based reverse ATRP process for the living radical polymerization of acrylonitrile
Hou C, Ji CN, Qu RJ, Wang CH, Sun CM, Zhou WY, Yu MM |
| 1581 - 1590 |
A novel synthesis of reactive nano-clay polyurethane and its physical and dyeing properties
Wang HH, Chen KV |
| 1591 - 1596 |
Monte Carlo simulation of the compatibility of graft copolymer compatibilized two incompatible homopolymer blends: Effect of graft structure
Zhu YT, Ma ZW, Li YQ, Cui J, Jiang W |
| 1597 - 1604 |
Soy protein plastics reinforced and toughened by SiO2 nanoparticles
Ai FJ, Zheng H, Wei M, Huang J |
| 1605 - 1610 |
Dissolution and wet spinning of silk fibroin using phosphoric acid/formic acid mixture solvent system
Ki CS, Lee KH, Baek DH, Hattori M, Urn IC, Ihm DW, Park YH |
| 1611 - 1615 |
Synthesis and properties of PSF/PTMEG copolyurethanes
Sun G, Liu Y, Lv H, Zhu N, Hu K |
| 1616 - 1622 |
Synthesis of diblock copolymers comprising poly(2-vinylpyridine-co-acrylonitrile) and polystyrene blocks by nitroxide-mediated radical polymerization
Lokaj J, Polikova L, Holler P, Starovoytova L, Stepanek P, Diat O |
| 1623 - 1631 |
Synthesis, characterization, and chemical degradation of segmented polyurethanes with butylamine for chemical recycling
Elidrissi A, Krim O, Ouslimane S, Berrabeh M, Touzani R |
| 1632 - 1641 |
Preparation and characterization of large porous poly(HEMA-co-EDMA) microspheres with narrow size distribution by modified membrane emulsification method
Qu HH, Gong FL, Ma GH, Su ZG |
| 1642 - 1650 |
Polymeric carbon nanocomposites from multiwalled carbon nanotubes functionalized with segmented polyurethane
Wang TL, Tseng CG |
| 1651 - 1657 |
Mechanism of curing process for polycarbosilane fiber with cyclohexene vapor
Mao XH, Song YC, Li W, Yang DX |
| 1658 - 1667 |
Foams based on low density polyethylene/hectorite nanocomposites: Thermal stability and thermomechanical properties
Velasco JI, Antunes M, Ayyad O, Saiz-Arroyo C, Rodriguez-Perez MA, Hidalgo F, de Saja JA |
| 1668 - 1678 |
Development, optimization, and characterization of electrospun poly(lactic acid) nanofibers containing multi-walled carbon nanotubes
McCullen SD, Stano KL, Stevens DR, Roberts WA, Monteiro-Riviere NA, Clarke LI, Gorga RE |
| 1679 - 1686 |
Potential wound dressing with improved antimicrobial property
Guan M, Ren L, Wu T, Sun LP, Li LR, Zhang QQ |
| 1687 - 1699 |
Preparation of a heterogeneous hollow-fiber affinity membrane modified with a mercapto chelating resin
Wang B, Huang L, Xiao F, Liu W, Jiang XP |
| 1700 - 1706 |
Supramolecular inclusion complexes of biodegradable cholesteryl-(epsilon-caprolactone)(n)over-bar functionalized polymer with alpha-cyclodextrin
Guo JB, Sun J, Zhu SQ, Cao H, Zhao DY, Wang LP, Yang H |
| 1707 - 1711 |
Synthesis and corrosion protection performance of polydiphenylamine
Sathiyanarayanan S, Muthukrishnan S, Venkatachari G |
