| 291 - 296 |
Preparation and characterization of poly(vinyl chloride)-graft-acrylic acid membrane by electron beam
Liu F, Zhu BK, Xu YY |
| 297 - 301 |
A kinetic study of novel bimetallic titanocene catalyst for syndiospecific styrene polymerization
Yim JH, Cho KY |
| 302 - 308 |
Smart polymer recycling: Synthesis of novel rigid polyurethanes using phosphorus-containing oligomers formed by controlled degradation of microporous polyurethane elastomer
Grancharov G, Mitova V, Shenkov S, Topliyska A, Gitsov I, Troev K |
| 309 - 316 |
Shear and elongational rheology of polyethylenes with different molecular characteristics. I. Shear rheology
Wei X, Collier JR, Petrovan S |
| 317 - 321 |
Preparation of styrene-maleic acid copolymers and its application in encapsulated pigment red 122 dispersion
Fu SH, Fang KJ |
| 322 - 332 |
Enhancing the mechanical properties of styrene-butadiene rubber by optimizing the chemical bonding between silanized silica nanofiller and the rubber
Ansarifar A, Wang L, Ellis RJ, Kirtley SP, Riyazuddin N |
| 333 - 340 |
Flame retardancy and mechanical properties of EVA nanocomposites based on magnesium hydroxide nanoparticles/microcapsulated red phosphorus
Lv JP, Liu WH |
| 341 - 351 |
Thermal degradation and ageing behavior of microcomposites of natural rubber, carboxylated styrene butadiene rubber latices, and their blends
Stephen R, Siddique AM, Singh F, Kailas L, Jose S, Joseph K, Thomas S |
| 352 - 359 |
New photochemical approach to cellulose fabric and photoinitiator system
Han S, Lee M |
| 360 - 372 |
Surface modification of a group of polymers using a low temperature cascade arc torch
Gilliam M, Yu QS |
| 373 - 378 |
Preparation and characterization of poly(ethylene terephthalate) fabrics treated by blends of cellulose nanocrystals and polyethylene glycol
Li WD, Ding EY |
| 379 - 389 |
Morphology and nonisothermal crystallization behavior of PP/Novolac blends
Cui LM, Wang SF, Zhang Y, Zhang YX |
| 390 - 397 |
Mechanical and thermal properties of toughened polypropylene composites
Houshyar S, Shanks RA |
| 398 - 404 |
Photoinitiated RAFT polymerization in the presence of trithiocarbonate
Ran R, Yu Y, Wan T |
| 405 - 411 |
Preparation of poly(phthalazinone ether sulfone ketone) hollow fiber membrane for gas separation
Fu HT, Yang DL, Zhang SH, Jian XG |
| 412 - 419 |
Physicochemical properties of prepared ion-exchangers from cellulose incorporated with different functional group
Nada AMA, Adel AM |
| 420 - 423 |
Synthesis of formaldehyde polymers from benzene-1,2-diol, phenolic alkane-1,2-diol, and phenolic alkane-1,3-diol as immobilized chelatants for borate anion
Tyman JHP, Payne PB |
| 424 - 428 |
Surface free energy analysis of poly(vinyl alcohol) films having various molecular parameters
Kim JH, Shin DS, Han MH, Kwon OW, Lee HK, Lee SG, Ghim HD, Park JM, Han SS, Noh SK, Lyoo WS |
| 429 - 434 |
Preparation and properties of iodine-doped radiopaque natural rubber
Nisha VS, Joseph R |
| 435 - 445 |
Effect of polymer-clay interaction on solvent transport behavior of fluoroelastomer-clay nanocomposites and prediction of aspect ratio of nanoclay
Maiti M, Bhowmick AK |
| 446 - 452 |
Thermotropic color changing nanoparticles prepared by encapsulating blue polystyrene particles with a poly-N-isopropylacrylamide gel
Yuan B, Wicks DA |
| 453 - 459 |
Physical properties of water-blown rigid polyurethane foams from vegetable oil-based polyols
Tu YC, Kiatsimkul P, Suppes G, Hsieh FH |
| 460 - 468 |
Mechanical properties and processibilty of glass-fiber-, wollastonite-, and fluoro-rubber-reinforced silicone rubber composites
Park ES |
| 469 - 476 |
Characterization and property correlations of amorphous poly(alpha olefin)
Ha HS, Shin JH, Kim BK |
| 477 - 485 |
High performance elastomer composites containing ultra high cis polybutadiene with high abrasion and low rolling resistances
Kwag G, Kim P, Han S, Lee S, Choi H, Kim S |
| 486 - 491 |
Dispersing mechanism of carboxymethyl starch as water-reducing agent
Zhang DF, Ju BZ, Zhang SF, Yang JZ |
| 492 - 499 |
Effect of cellulase pretreatment of raw and bleached cotton fibers on properties of hydroentangled nonwoven fabrics
Verenich S, Arumugam K, Shim E, Pourdeyhimi B |
| 500 - 509 |
Polymerization of styrene using bis(beta-ketoamino)nickel(II)/methylaluminoxane catalytic systems
Yu SX, He XH, Chen YW, Liu YM, Hong SG, Wu Q |
| 510 - 514 |
Synthesis, morphology, component distribution, and mechanical properties of nitrocellulose/gradient poly(ethylene glycol dimethacrylate) semi-IPN material
Xiao ZG, Ying SJ, He WD, Xu FM, Sun P |
| 515 - 520 |
An investigation on the reinforcing potential of red earth as filler for natural rubber compounds
Osabohien E, Egboh SHO |
| 521 - 526 |
Copper-based reverse ATRP process for the controlled radical polymerization of methyl methacrylate
Pan K, Jiang L, Zhang J, Dan Y |
| 527 - 532 |
Absorption and release of zinc and copper ions by chitosan fibers
Qin YM, Zhu CJ, Chen J, Liang D, Wo GF |
| 533 - 538 |
Copolymers of 3,3,3-trifluoropropene and vinyl acetate: Synthesis, characterization, and hydrolysis
Zhang SX, Xu AH, Geng B, Xia PD, Chu SZ, Liu M |
| 539 - 546 |
Preparation and characterization of a novel pH-, thermo-, and ionic strength-responsive hydrogels based on xanthan gum-poly(aspartic acid)
Yang J, Fang L, Wang F, Tan TW |
| 547 - 551 |
Thermogravimetric analysis of chitosan
Hong PZ, Li SD, Ou CY, Li CP, Yang L, Zhang CH |
| 552 - 561 |
Preparation of nanoparticles composed of chitosan and its derivatives as delivery systems for macromolecules
Sun Y, Wan AJ |
| 562 - 569 |
Synthesis of high molecular weight polyoxyethylene with a quaternary catalyst and study of its conductive blends with poly(2-vinyl pyridine)
Xie HQ, Zhang JH, Cui MH, Xie D |
| 570 - 575 |
Esterification reaction between acetylated wood and trialkoxysilane coupling agents
Ozmen N, Cetin NS, Tingaut P, Sebe G |
| 576 - 584 |
Doping effect of organic sulphonic acids on the solid-state synthesized polyaniline
Abdiryim T, Jamal R, Nurulla I |
| 585 - 592 |
Observation for mechanical property variations of single polymer particles
Kim DO, Jin JH, Shon WI, Oh SH |
| 593 - 601 |
Synthesis and characterization of a poly(ethylene glycol) prepolymer to be applied as a bioadhesive
Ferreira P, Coelho JFJ, Pereira R, Silva AFM, Gil MH |
| 602 - 608 |
Friction and wear mechanisms of PA66/PPS blend reinforced with carbon fiber
Chen ZB, Liu XJ, Lu RG, Li TS |
| 609 - 614 |
Development of light-induced functionalized asymmetric polysulfone membranes
Yogesh, Paul P, Basu S, Bhattacharya A |
| 615 - 622 |
Crystallization behavior of poly(epsilon-caprolactone) in poly(epsilon-caprolactone) and poly(vinyl methyl ether) mixtures
Meng YF, Li HF, Huo H, Jiang SC, An LJ |
| 623 - 628 |
Recoverable surface modification using dendritically fluorocarbon-functionalized poly(methyl methacrylate)
Thompson RL, Narrainen AP, Eggleston SM, Ansari IA, Hutchings LR, Clarke N |
| 629 - 640 |
Poly(epsilon-caprolactone)-functionalized carbon nanofibers by surface-initiated ring-opening polymerization
Wang K, Li WW, Gao C |
| 641 - 646 |
Free volume properties of thermoplastic polyurethane/polymethylmethacrylate blends: Evidence of interchain interaction
Patricio PSO, Silva GG, Machado JC |
| 647 - 655 |
Composites of polymeric gels and magnetic nanoparticles: Preparation and drug release behavior
Francois NJ, Allo S, Jacobo SE, Daraio ME |
| 656 - 663 |
Physicochemical properties and fracture behavior of soy-based resin
Shabeer A, Sundararaman S, Chandrashekhara K, Dharani LR |
| 664 - 672 |
Cationic cyclization of purified natural rubber in latex form with a trimethylsilyl triflate as a novel catalyst
Riyajan SA, Liaw DJ, Tanaka Y, Sakdapipanich JT |
| 673 - 679 |
Hexamethylene diisocyanate crosslinking 2-hydroxypropyltrimethyl ammonium chloride chitosan/poly(acrylonitrile) composite nanofiltration membrane
Huang RH, Chen GH, Sun MK, Gao CJ |
| 680 - 684 |
Peel and shear strength of pressure-sensitive adhesives prepared from epoxidized natural rubber
Poh BT, Kwo HK |
| 685 - 696 |
Synthesis and properties of flame-retardant epoxy resins based on DOPO and one of its analog DPPO
Schafer A, Seibold S, Lohstroh W, Walter O, Doring M |
| 697 - 705 |
Sol-gel-derived alumina/polyvinylpyrrolidone hybrid nanocomposite film on metal for corrosion resistance
Jing CB, Hou JX |
| 706 - 709 |
Preparation and characterization of castor oil-based polyurethane/poly(o-methoxyaniline) blend film
Alves WF, Kanda DHF, Malmonge LF, Malmonge JA, Mattoso LHC |
| 710 - 717 |
Influence of annealing on conduction of high-density polyethylene/carbon black composite
Song YH, Zheng Q |
| 718 - 725 |
Controlled release study of carbaryl insecticide from calcium alginate and nickel alginate hydrogel beads
Isiklan N |
| 726 - 732 |
Application of polycarboxylic acid sodium salt in the dyeing of cotton fabric with reactive dyes
Guan Y, Zheng QK, Mao YH, Gui MS, Fu HB |
| 733 - 738 |
Infrared spectroscopic monitoring of urea addition to oriented strandboard resins
So CL, Eberhardt TL, Hsu E, Via BK, Hse CY |
| 739 - 748 |
Morphology, nonisothermal crystallization behavior, and kinetics of poly(phenylene sulfide)/polycarbonate blend
Wu DF, Zhang YS, Zhang M, Wu LF |
| 749 - 756 |
Synthesis, characterization, and applications of novel additives of polysiloxane containing N,N'-bis(diphenylsilyl)tetraphenylcyclodisilazane
Zhu YP, Guo L, Zhang ZJ, Xie ZM, Xu CH |
| 757 - 764 |
Birefringent characterization of necking phenomenon along cold-drawn polypropylene fibers. I. Offline drawing
El-Dessouky HM |
| 765 - 770 |
Segment self-orientational behavior in shape memory polymer thin films probed by Raman spectroscopy
Liem H, Yeung LY |
| 771 - 776 |
Synthesis and characterization of poly(epsilon-caprolactone)-b-poly(ethylene glycol) block copolymers prepared by a salicylaldimine-aluminum complex
Du ZX, Xu JT, Yang Y, Fan ZQ |
| 777 - 782 |
Synthesis of boron-containing coupling agents and its effect on the interfacial bonding of fluoropolymer/TATB composite
Li F, Ye L, Nie FD, Liu YG |
| 783 - 789 |
Mechanical property investigation of single polymer particles with the variation of molecular structure of crosslinking monomer
Kim DO, Jin JH |
| 790 - 802 |
Effect of organic modifiers on dynamic and static nanomechanical properties and crystallinity of intercalated clay-polycaprolactam nanocomposites
Sikdar D, Katti D, Katti K, Mohanty B |
| 803 - 808 |
Performance of the light emitting diodes versus conventional light sources in the UV light cured formulations
Anyaogu KC, Ermoshkin AA, Neckers DC, Mejiritski A, Grinevich O, Fedorov AV |
| 809 - 820 |
Preparation and properties of poly(imide siloxane) segmented copolymer/silica hybrid nanocomposites
Liaw WC, Chen KP |
| 821 - 826 |
Preparation and characterization of a novel composite based on hyperbranched polysilane and fullerene
Yu J, Zhang ZH, Ni Y, Lu YB, Xiong YQ, Xu WJ |
| 827 - 837 |
Melting and degradation of nylon-11 particles during HVOF combustion spraying
Ivosevic M, Cairncross RA, Knight R |
| 838 - 845 |
Proton conductivity and methanol permeability of sulfonated poly(vinyl alcohol) membranes modified by using sulfoacetic acid and poly(acrylic acid)
Seeponkai N, Wootthikanokkhan J |
| 846 - 852 |
Thermal oxidation of metallocene-catalyzed poly(ethylene octene) by a rheological method
Yang K, Yu W, Zhou CX |
| 853 - 858 |
Fluoroquinolon-type antibiotic treatment of PAN and cationic-dyeable PET fibers for infection resistant materials
Choi HM |
| 859 - 864 |
Effect of cationization reagents on the matrix-assisted laser desorption/ionization time-of-flight mass spectrum of Chinese gallotannins
Xiang P, Lin Y, Lin P, Xiang C, Yang ZW, Lu ZM |
| 865 - 876 |
Vulcanization of polychloroprene rubber. I. A revised cationic mechanism for ZnO crosslinking
Desai H, Hendrikse KG, Woolard CD |
| 877 - 884 |
Surface-initiated ring-opening polymerization of epsilon-caprolactone from the surface of PP film
Sui Y, Zhao JB, Gan SH, Zhao HC, Yang WT |
| 885 - 892 |
Peroxide crosslinking of a styrene-free unsaturated polyester
Mironi-Harpaz I, Narkis M, Siegmann A |
| 893 - 898 |
Investigation of MWNTs/PBO nanocomposite polymerization mechanism with model compound
Li X, Huang YD, Cao HL, Liu L |
| 899 - 902 |
Microstructural evaluation of poly(vinyl alcohol)-based hydrogels obtained by freezing-thawing technique: Thermal analysis and positron annihilation
Paranhos CM, Soares BG, Oliveira RN, Pessan LA, de Freitas DS, Windmoller D, Machado JC |
| 903 - 907 |
Gas sorption in semicrystalline rubbery polymers revisited
Lopez-Gonzalez M, Compan V, Riande E |
| 908 - 914 |
Cure characteristics, morphology, and mechanical properties of ethylene-propylene-diene-monomer rubber/acrylonitrile butadiene rubber blends
Manoj KC, Unnikrishnan G |
| 915 - 927 |
Amphiphilic block copolymers based on methoxy poly(ethylene glycol) and either crystalline or amorphous poly(caprolactone-b-lactide): Synthesis, solid-state and aqueous solution characterizations
Zhang J, Wang LQ, Wang HJ, Tu KH, Liu L |
| 928 - 934 |
Preparation and characterization of HAP/carboxymethyl chitosan nanocomposites
Sreedhar B, Aparna Y, Sairam M, Hebalkar N |
| 935 - 943 |
Mechanical characterization of polyhedral oligomeric silsesquioxane/polypropylene blends
Baldi F, Bignotti F, Fina A, Tabuani D, Ricco T |
| 944 - 950 |
Novel gd-substituted LiNi ferrite/polyaniline composite prepared by in situ polymerization
Jiang J, Li LC, Xu F |
| 951 - 963 |
Poly(ether amide) segmented block copolymers with adipic acid based tetraamide segments
Biemond GJE, Feijen J, Gaymans RJ |
| 964 - 972 |
Preparation and characterization of poly(D,L-lactic-co-glycolic acid) nanoparticles containing 3-(benzoxazol-2-yl)-7-(N,N-diethyl amino) chromen-2-one
Gomes AJ, Assuncao RMN, Rodrigues G, Espreafico EM, Machado AED |
| 973 - 977 |
High resolution NMR study of tropical fruit seed starches
Costa PDM, Tavares MIB, Bathista ALBS, da Silva EO, Nogueira JS |
| 978 - 985 |
Isothermal crystallization of HDPE/octamethyl polyhedral oligomeric silsesquioxane nanocomposites: Role of POSS as a nanofiller
Joshi M, Butola BS |
| 986 - 996 |
Thermal and mechanical properties of polystyrene/poly(acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-styr ene) (AES) blends prepared by the in situ polymerization of styrene
Lourenco E, Felisberti MI |
