| 2635 - 2639 |
Design and synthesis of superabsorbent polymers
Raju MP, Raju KM |
| 2640 - 2646 |
Effect of shearing on crystallization behavior of poly(ethylene terephthalate)
Myung HS, Yoon WJ, Yoo ES, Kim BC, Im SS |
| 2647 - 2661 |
Macromolecular modification of EPDM: Wettability, miscibility, and morphology study
Ginic-Markovic M, Choudhury NR, Dimopoulos M, Matisons J, Kumudinie C |
| 2662 - 2669 |
Preparation of microcapsules composed of waste-expanded polystyrene and paper fiber by semichemical recycle
Taguchi Y, Tanaka M |
| 2670 - 2675 |
Synthesis and properties of polycarbonate-poly(methyl methacrylate) craft copolymers by polycondensation of macromonomers
Okamoto M |
| 2676 - 2682 |
Crystallization of poly(ethylene terephthalate) modified with codiols
Bouma K, Regelink M, Gaymans RJ |
| 2683 - 2689 |
Heating simulation of multilayer preforms
Lebaudy P, Grenet J |
| 2690 - 2695 |
Graft copolymerization of PU membranes with acrylic acid and crotonic acid using benzoyl peroxide initiator
Pulat M, Babayigit D |
| 2696 - 2704 |
Effect of linear comonomers on the rate of crystallization of copolyesters
Connor DM, Allen SD, Collard D, Liotta CL, Schiraldi DA |
| 2705 - 2717 |
Membrane transport of organics. III. Permeation of some carboxylic acids through bipolar polymer membrane
Wodzki R, Nowaczyk J |
| 2718 - 2728 |
Mechanical properties of flame retardant filled polypropylene composites
Tai CM, Li RKY |
| 2729 - 2736 |
Preparation and characterization of nanofiltration composite membranes using polyacrylonitrile (PAN). II. Preparation and characterization of polyamide composite membranes
Oh NW, Jegal J, Lee KH |
| 2737 - 2745 |
Polyblend systems of polyurethane (AU) and ethylene acrylic elastomer (vamac) using the sulfur cure systems
Khatua BB, Das CK |
| 2746 - 2751 |
Blends of poly(vinyl butyral-co-vinyl alcohol) and poly(ethylene terephthalate-co-ethylene naphthalate): Thermal, mechanical, and morphological properties
Chang JH, Park KM, Kang CS, Jeong HK |
| 2752 - 2758 |
Influence of reaction between second monomer and vinyl group of seed polysiloxane on seeded emulsion polymerization
He WD, Pan CY |
| 2759 - 2767 |
Dicyanate ester-polyetherimide semi-interpenetrating polymer networks. II. Effects of morphology on the fracture toughness and mechanical properties
Harismendy I, Del Rio M, Marieta C, Gavalda J, Mondragon I |
| 2768 - 2773 |
Abatement of heavy metals and softening of hard water by the CoAlPO4-5/plysulfone membrane
Lin SS, Chen SH, Chang CY, Chang DJ, Chen CC |
| 2774 - 2781 |
Copolymerization of methylmethacrylate with styrene using triphenylbismuthoniumylide as radical initiator
Bajpai R, Srivastava AK |
| 2782 - 2789 |
Swelling-deswelling behavior of poly(acrylamide-co-maleic acid) hydrogels
Bajpai SK |
| 2790 - 2794 |
Study on tribological properties of frictional material based aromatic polyamide
Liu XJ, Li TS, Tian N, Liu WM |
| 2795 - 2799 |
The use of metal-containing monomer in the preparation of molecularly imprinted polymer to increase the adsorption capacity
Sreenivasan K |
| 2800 - 2814 |
Examination of selected synthesis parameters for wood adhesive-type urea-formaldehyde resins by C-13 NMR spectroscopy. III
Kim MG |
| 2815 - 2822 |
High molecular weight tail and long-chain branching in low-density polyethylenes
Beer F, Capaccio G, Rose LJ |
| 2823 - 2832 |
Properties and morphologies of PVC/nylon terpolymer blends
Lian YX, Zhang Y, Peng ZL, Zhang XF, Fan RL, Zhang YX |
| 2833 - 2841 |
Conifer fibers as reinforcing materials for polypropylene-based composites
Chuai CZ, Almdal K, Poulsen L, Plackett D |
| 2842 - 2850 |
Solvent effects on the miscibility of poly(methyl methacrylate)/poly(bisphenol A carbonate) blends
Hsu WP |
| 2851 - 2858 |
Adsorption of urokinase by polypropylene films with various amine groups
Choi SH, Lee KP, Nho YC |
| 2859 - 2864 |
Application of chitosan/nonionic surfactant mixture in reactive dyes for dyeing wool fabrics
Yen MS |
| 2865 - 2876 |
Styrene-ethylene/butylene-styrene blends for improved constrained-layer damping
Oborn J, Bertilsson H, Rigdahl M |
| 2877 - 2888 |
Use of silanes and copolymers as adhesion promoters glass fiber/polyethylene composites
Bikiaris D, Matzinos P, Prinos J, Flaris V, Larena A, Panayiotou C |
| 2889 - 2901 |
Thermal characterization of three-component blends for hot-melt adhesives
Fernandes EG, Lombardi A, Solaro R, Chiellini E |
