| 2759 - 2764 |
Carbon nanotubes-supported colloidal Ag-Pd nanoparticles as electrocatalysts toward oxygen reduction reaction in alkaline electrolyte
Lee CL, Chiou HP, Chang KC, Huang CH |
| 2765 - 2772 |
Microwave-assisted polyol synthesis of Pt-Zn electrocatalysts on carbon nanotube electrodes for methanol oxidation
Hsieh CT, Hung WM, Chen WY, Lin JY |
| 2773 - 2776 |
A new cathodic electrode deposit with palladium nanoparticles for cost-effective hydrogen production in a microbial electrolysis cell
Huang YX, Liu XW, Sun XF, Sheng GP, Zhang YY, Yan GM, Wang SG, Xu AW, Yu HQ |
| 2777 - 2784 |
Electrodeposited zirconium-doped alpha-Fe2O3 thin film for photoelectrochemical water splitting
Kumar P, Sharma P, Shrivastav R, Doss S, Satsangi VR |
| 2785 - 2793 |
Photoelectrochemical evaluation of undoped and C-doped CdIn2O4 thin film electrodes
Sun YP, Thornton JM, Morris NA, Rajpura R, Henkes S, Raftery D |
| 2794 - 2802 |
Facile fabrication of Bi2O3/TiO2-xNx nanocomposites for excellent visible light driven photocatalytic hydrogen evolution
Naik B, Martha S, Parida KM |
| 2803 - 2816 |
Operating maps of a combined hydrogen production and power generation system based on aluminum combustion with water
Franzoni F, Mercati S, Milani M, Montorsi L |
| 2817 - 2830 |
Features of solar thermochemical redox cycles for hydrogen production from water as a function of reactants' main characteristics
Vishnevetsky I, Berman A, Epstein M |
| 2831 - 2844 |
Hydrogen production via sulfur-based thermochemical cycles: Part 1: Synthesis and evaluation of metal oxide-based candidate catalyst powders for the sulfuric acid decomposition step
Karagiannakis G, Agrafiotis CC, Zygogianni A, Pagkoura C, Konstandopoulos AG |
| 2845 - 2854 |
Integrated gasification and Cu-Cl cycle for trigeneration of hydrogen, steam and electricity
Aghahosseini S, Dincer I, Naterer GF |
| 2855 - 2859 |
Minuscule device for hydrogen generation/electrical energy collection system on aluminum alloy surface
Davoodi A, Pan JS, Leygraf C, Parvizi R |
| 2860 - 2868 |
Sustainable hydrogen production from steam reforming of bio-oil model compound based on carbon deposition/elimination
Wu C, Liu RH |
| 2869 - 2876 |
In-situ measurement of the local temperature distributions for the steam reforming of a methanol micro reformer by using flexible micro temperature sensors
Lee CY, Lee SJ, Shen CC, Yeh CT, Chang CC, Chang YM |
| 2877 - 2886 |
Reforming of bioethanol over Ni/Al2O3 and Ni/CeZrO2/Al2O3 catalysts in supercritical water for hydrogen production
Therdthianwong S, Srisiriwat N, Therdthianwong A, Croiset E |
| 2887 - 2895 |
Hydrogen production via sorption enhanced steam reforming of butanol: Thermodynamic analysis
Wang WJ, Cao YY |
| 2896 - 2903 |
Ultrasonication for biohydrogen production from food waste
Elbeshbishy E, Hafez H, Nakhla G |
| 2904 - 2935 |
Review of methane catalytic cracking for hydrogen production
Amin AM, Croiset E, Epling W |
| 2936 - 2944 |
Development of a reaction mechanism for predicting hydrogen production from homogeneous decomposition of methane
Sinaki MY, Matida EA, Hamdullahpur F |
| 2945 - 2949 |
Real-time sensing of methane steam reforming by YSZ oxygen sensor
Matsui T, Saburi C, Okuda S, Muroyama H, Eguchi K |
| 2950 - 2959 |
CO2 reforming of methane over Pt-Ni/Al2O3 catalysts: Effects of catalyst composition, and water and oxygen addition to the feed
Ozkara-Aydinoglu S, Aksoylu AE |
| 2960 - 2968 |
A novel integrated thermally coupled configuration for methane-steam reforming and hydrogenation of nitrobenzene to aniline
Aboosadi ZA, Rahimpour MR, Jahanmiri A |
| 2969 - 2978 |
Combined dry reforming and partial oxidation of methane to synthesis gas on noble metal catalysts
Nematollahi B, Rezaei M, Khajenoori M |
| 2979 - 2991 |
A novel integrated, thermally coupled fluidized bed configuration for catalytic naphtha reforming to enhance aromatic and hydrogen productions in refineries
Rahimpour MR, Vakili R, Pourazadi E, Iranshahi D, Paymooni K |
| 2992 - 3006 |
Simultaneous hydrogen production and utilization via coupling of Fischer-Tropsch synthesis and decalin dehydrogenation reactions in GTL technology
Rahimpour MR, Mirvakili A, Paymooni K |
| 3007 - 3015 |
Hydrogen storage in MgH2 coated single walled carbon nanotubes
Pandyan RK, Seenithurai S, Mahendran M |
| 3016 - 3021 |
Microstructure and electrochemical hydrogen storage characteristics of (La0.7Mg0.3)(1-x)CexNi2.8Co0.5 (x=0-0.20) electrode alloys
Dong ZW, Ma LQ, Wu YM, Wang LM, Shen XD |
| 3022 - 3036 |
Hydrogen storage in bulk Mg-Ti and Mg-stainless steel multilayer composites synthesized via accumulative roll-bonding (ARB)
Danaie M, Mauer C, Mitlin D, Huot J |
| 3037 - 3049 |
Technical assessment of compressed hydrogen storage tank systems for automotive applications
Hua TQ, Ahluwalia RK, Peng JK, Kromer M, Lasher S, McKenney K, Law K, Sinha J |
| 3050 - 3055 |
Microstructure and electrochemical hydrogen storage characteristics of La0.67Mg0.33CaxNi2.75Co0.25 (x=0-0.15) electrode alloys
Dong ZW, Wu YM, Ma LQ, Wang LD, Shen XD, Wang LM |
| 3056 - 3061 |
Selective hydrogenation of Ti-Zr-Ni alloys
Kocjan A, Kovacic S, Gradisek A, Kovac J, McGuiness PJ, Apih T, Dolinsek J, Kobe S |
| 3062 - 3066 |
Development of sample holder for in situ neutron measurement of hydrogen absorbing alloy
Iwase K, Mori K, Hishinuma Y, Hasegawa Y, Iimura S, Ishikawa H, Kamoshida T, Ishigaki T |
| 3067 - 3075 |
Diagnosis of polymer electrolyte fuel cells failure modes (flooding & drying out) by neural networks modeling
Steiner NY, Hissel D, Mocoteguy P, Candusso D |
| 3076 - 3086 |
Dynamic behavior of liquid water transport in a tapered channel of a proton exchange membrane fuel cell cathode
Akhtar N, Kerkhof PJAM |
| 3087 - 3095 |
A single-type aluminum/composite hybrid bipolar plate with surface modification for high efficiency PEMFC
Kim BG, Lim JW, Lee DG |
| 3096 - 3109 |
Influence of PEMFC gas flow configuration on performance and water distribution studied by SANS: Evidence of the effect of gravity
Morin A, Xu FN, Gebel G, Diat O |
| 3110 - 3122 |
The dynamics analysis and controller design for the PEM fuel cell under gas flowrate constraints
Chen PC |
| 3123 - 3130 |
Preparation and properties of proton exchange membranes based-on Nafion (R) and phosphonic acid-functionalized hollow silica spheres
Lou LD, Pu HT |
| 3131 - 3137 |
Thermal cycle stability of Al2O3-based compressive seals for planar intermediate temperature solid oxide fuel cells
Dai Z, Pu JA, Yan D, Chi B, Jian L |
| 3138 - 3146 |
Electrochemical performance of unsintered Ba0.5Sr0.5Co0.8Fe0.2O3-delta, La0.6Sr0.Co-4(0).8Fe0.2O3-delta, and La0.8Sr0.2MnO3-delta cathodes for metal-supported solid oxide fuel cells
Kim YM, Kim-Lohsoontorn P, Baek SW, Bae J |
| 3147 - 3152 |
A right-angular configuration for the single-chamber solid oxide fuel cell
Wang ZH, Lu Z, Wei B, Huang XQ, Chen KF, Pan WP, Su WH |
| 3153 - 3166 |
Thermo-electrochemical modeling of ammonia-fueled solid oxide fuel cells considering ammonia thermal decomposition in the anode
Ni M |
| 3167 - 3178 |
A numerical study on the heat and mass transfer characteristics of metal-supported solid oxide fuel cells
Park J, Kim YM, Bae J |
| 3179 - 3186 |
Evaluation and optimization of Bi1-xSrxFeO3-delta perovskites as cathodes of solid oxide fuel cells
Niu YJ, Sunarso J, Zhou W, Liang FL, Ge L, Zhu ZH, Shao ZP |
| 3187 - 3205 |
Overview on nanostructured membrane in fuel cell applications
Thiam HS, Daud WRW, Kamarudin SK, Mohammad AB, Kadhum AAH, Loh KS, Majlan EH |
| 3206 - 3214 |
An energetic-exergetic comparison between PEMFC and SOFC-based micro-CHP systems
Barelli L, Bidini G, Gallorini F, Ottauiano A |
| 3215 - 3221 |
An energy-efficient air-conditioning system for hydrogen driven cars
Linder M, Kulenovic R |
| 3222 - 3231 |
Numerical investigation of diluent influence on flame extinction limits and emission characteristic of lean-premixed H-2-CO (syngas) flames
Ding N, Arora R, Norconk M, Lee SY |
| 3232 - 3242 |
Laminar burning velocities and flame stability analysis of H-2/CO/air mixtures with dilution of N-2 and CO2
Burbano HJ, Pareja J, Amell AA |
| 3243 - 3252 |
Laminar burning velocities and flame stability analysis of syngas mixtures at sub-atmospheric pressures
Burbano HJ, Pareja J, Amell AA |
| 3253 - 3259 |
Chemical looping combustion of Victorian brown coal using NiO oxygen carrier
Saha C, Roy B, Bhattacharya S |
| 3260 - 3267 |
Effect of hydrogen treatment on solidification structures and mechanical properties of TiAl alloys
Liu XW, Su YQ, Luo LS, Li K, Dong FY, Guo JJ, Fu HZ |
| 3268 - 3271 |
First-order perturbation solutions of liquid pool spreading with vaporization
Kim M, Do K, Choi B, Han Y |
