| 17655 - 17662 |
Selecting hydrogen production methods using fuzzy analytic hierarchy process with opportunities, costs, and risks
Heo E, Kim J, Cho S |
| 17663 - 17670 |
A grey-based group decision-making methodology for the selection of hydrogen technologies in life cycle sustainability perspective
Manzardo A, Ren JZ, Mazzi A, Scipioni A |
| 17671 - 17677 |
NbF5 additive improves hydrogen release from magnesium borohydride
Al-Kukhun A, Hwang HT, Varma A |
| 17678 - 17690 |
A kinetic model for H-2 production by plasmolysis of water vapours at atmospheric pressure in a dielectric barrier discharge microchannel reactor
Rehman F, Lozano-Parada JH, Zimmerman WB |
| 17691 - 17700 |
An integrated approach for the production of hydrogen and methane by catalytic hydrothermal glycerol reforming coupled with parabolic trough solar thermal collectors
Azadi P |
| 17701 - 17708 |
Steam flow effects on hydrolysis reaction kinetics in the Cu-Cl cycle
Pope K, Naterer GF, Wang ZL |
| 17709 - 17714 |
Low-temperature water-splitting by sodium redox reaction
Miyaoka H, Ichikawa T, Nakamura N, Kojima Y |
| 17715 - 17723 |
Chemically stable electrospun NiCu nanorods@carbon nanofibers for highly efficient dehydrogenation of ammonia borane
Yousef A, Barakat NAM, El-Newehy M, Kim HY |
| 17724 - 17730 |
Kinetic analysis of biohydrogen production from anaerobically treated POME in bioreactor under optimized condition
Rasdi Z, Mumtaz T, Rahman NA, Hassan MA |
| 17731 - 17737 |
Hydroprocessing of Jatropha oil over NiMoCe/Al2O3 catalyst
Liu J, Fan K, Tian WQ, Liu C, Rong L |
| 17738 - 17748 |
Solar-to-bioH(2) production enhanced by homologous overexpression of hydrogenase in green alga Chlorella sp. DT
Chien LF, Kuo TT, Liu BH, Lin HD, Feng TY, Huang CC |
| 17749 - 17762 |
Design of a novel biohythane process with high H-2 and CH4 production rates
Willquist K, Nkemka VN, Svensson H, Pawar S, Ljunggren M, Karlsson H, Murto M, Hulteberg C, van Niel EWI, Liden G |
| 17763 - 17777 |
Regulating biohydrogen production from wastewater by applying organic load-shock: Change in the microbial community structure and bio-electrochemical behavior over long-term operation
Goud RK, Mohan SV |
| 17778 - 17787 |
Uncharacterized Escherichia coli proteins YdjA and YhjY are related to biohydrogen production
Yusoff MZM, Maeda T, Sanchez-Torres V, Ogawa HI, Shirai Y, Hassan MA, Wood TK |
| 17788 - 17793 |
Conformational regulation of the hydrogenase gene expression in green alga Chlamydomonas reinhardtii
Eivazova ER, Markov SA |
| 17794 - 17800 |
Bio-hydrogen production and the F0F1-ATPase activity of Rhodobacter sphaeroides: Effects of various heavy metal ions
Hakobyan L, Gabrielyan L, Trchounian A |
| 17801 - 17808 |
Effects of biomass, COD and bicarbonate concentrations on fermentative hydrogen production from POME by granulated sludge in a batch culture
Mohammadi P, Ibrahim S, Annuar MSM |
| 17809 - 17816 |
Hydrogen supersaturation in thermophilic mixed culture fermentation
Zhang F, Zhang Y, Chen M, Zeng RJ |
| 17817 - 17827 |
Effects of structural parameters on the performance of a micro-reactor with micro-pin-fin arrays (MPFAR) for hydrogen production
Mei DQ, Qian M, Yao ZH, Liu BH, Lou XY, Chen ZC |
| 17828 - 17836 |
Kinetic effect of the ionomer on the oxygen reduction in carbon-supported Pt electrocatalysts
Velazquez-Palenzuela A, Centellas F, Brillas E, Arias C, Rodriguez RM, Garrido JA, Cabot PL |
| 17837 - 17843 |
Atomic layer deposition of Pt nanocatalysts on graphene oxide nanosheets for electro-oxidation of formic acid
Hsieh CT, Chen WY, Tzou DY, Roy AK, Hsiao HT |
| 17844 - 17852 |
Preparation of activated carbon supported Pt catalysts and optimization of their catalytic activities for hydrogen gas production from the hydrothermal treatment of biomass-derived compounds
Meryemoglu B, Irmak S, Hesenou A, Erbatur O |
| 17853 - 17861 |
Mesoporous plasmonic Au-TiO2 nanocomposites for efficient visible-light-driven photocatalytic water reduction
Fang J, Cao SW, Wang Z, Shahjamali MM, Loo SCJ, Barber J, Xue C |
| 17862 - 17869 |
Electrocatalytic hydrodehalogenation of 2,4-dichlorophenol in aqueous solution on palladium-nickel bimetallic electrode synthesized with surfactant assistance
Sun ZR, Wang K, Wei XF, Tong S, Hu X |
| 17870 - 17881 |
Hybrid functionals studies of structural and electronic properties of ZnxCd((1-x))S and (ZnxCd1-x)(SexS1-x) solid solution photocatalysts
Huang JD, Liu JY, Han KL |
| 17882 - 17891 |
Ni-Sn coatings as cathodes for hydrogen evolution in alkaline solution. Chemical composition, phase composition and morphology effects
Jovic VD, Lacnjevac U, Jovic BM, Karanovic L, Krstajic NV |
| 17892 - 17898 |
Catalyst loading for Pt-nanowire thin film electrodes in PEFCs
Du SF, Pollee BG |
| 17899 - 17909 |
Hybrid photocatalytic H-2 evolution systems containing xanthene dyes and inorganic nickel based catalysts
Zhang W, Xu R |
| 17910 - 17920 |
Deposition of Pt nanoparticles on different carbonaceous materials by using different preparation methods for PEMFC electrocatalysts
Veizaga N, Fernandez J, Bruno M, Scelza O, de Miguel S |
| 17921 - 17927 |
In situ facile synthesis of ruthenium nanocluster catalyst supported on carbon black for hydrogen generation from the hydrolysis of ammonia-borane
Liang HY, Chen GZ, Desinan S, Rosei R, Rosei F, Ma DL |
| 17928 - 17935 |
Self-sustained electrochemical promotion catalysts for partial oxidation reforming of heavy hydrocarbons
Wang ZD, Huang H, Liu HT, Zhou XY |
| 17936 - 17946 |
Fabrication of nano N-doped In2Ga2ZnO7 for photocatalytic hydrogen production under visible light
Martha S, Parida KM |
| 17947 - 17953 |
Electro-oxidation of methanol based on electrospun PdO-Co3O4 nanofiber modified electrode
Zhang YQ, Wang YZ, Jia JB, Wang JG |
| 17954 - 17966 |
Performance prediction of PEM fuel cell cathode catalyst layer using agglomerate model
Moein-Jahromi M, Kermani MJ |
| 17967 - 17977 |
Hydrogen production by steam reforming of liquefied natural gas (LNG) over ordered mesoporous nickel-alumina catalyst
Bang Y, Han SJ, Seo JG, Youn MH, Song JH, Song IK |
| 17978 - 17983 |
Facile synthesis of supported Pt-Cu nanoparticles with surface enriched Pt as highly active cathode catalyst for proton exchange membrane fuel cells
Xu Z, Zhang HM, Liu SS, Zhang BS, Zhong HX, Su DS |
| 17984 - 17991 |
Graphene supported platinum nanoparticles as anode electrocatalyst for direct borohydride fuel cell
Liu X, Yi LH, Wang XY, Su JC, Song YF, Liu J |
| 17992 - 18000 |
Improved durability of Pt/CNT catalysts by the low temperature self-catalyzed reduction for the PEM fuel cells
Lee TK, Jung JH, Kim JB, Hur SH |
| 18001 - 18020 |
Mesoporous nanocrystalline ceria-zirconia solid solutions supported nickel based catalysts for CO2 reforming of CH4
Xu LL, Song HL, Chou LJ |
| 18021 - 18030 |
Microfibrous entrapment of Ni/Al2O3 for dry reforming of methane: Heat/mass transfer enhancement towards carbon resistance and conversion promotion
Chen W, Sheng WQ, Cao FH, Lu Y |
| 18031 - 18039 |
Conversion of carbon dioxide and methane in biomass synthesis gas for liquid fuels production
Chattanathan SA, Adhikari S, Taylor S |
| 18040 - 18049 |
The decomposition of aromatic hydrocarbons during coal pyrolysis in hydrogen plasma: A density functional theory study
Huang XY, Cheng DG, Chen FQ, Zhan XL |
| 18050 - 18060 |
Energy and exergy analyses of integrated hybrid sulfur isobutane system for hydrogen production
Ratlamwala TAH, Dincer I, Naterer GF |
| 18061 - 18073 |
On the feasibility of developing hydrogen storages capable of adsorption hydrogen both in its molecular and atomic states
Goncharov A, Guglya A, Melnikova E |
| 18074 - 18079 |
Promoted hydrogen release from 3LiBH(4)/MnF2 composite by doping LiNH2: Elimination of diborane release and reduction of decomposition temperature
Song Y, Fang F, Li YT, Zhao QY, Sun DL, Zhang QA, Ouyang LZ, Zhu M |
| 18080 - 18094 |
Guidelines for thermal management design of hydride containers
Melnichuk M, Silin N |
| 18095 - 18100 |
Crystal structure and cyclic properties of hydrogen absorption-desorption in Pr2MgNi9
Iwase K, Terashita N, Mori K, Tsunokake S, Ishigaki T |
| 18101 - 18107 |
NH3BH3/LiBH4 center dot NH3 modified by metal hydrides for advanced dehydrogenation
Tan YB, Tang ZW, Li SF, Li Q, Yu XB |
| 18108 - 18117 |
Thermodynamic analysis of a new renewable energy based hybrid system for hydrogen liquefaction
Ratlamwala TAH, Dincer I, Gadalla MA, Kanoglu M |
| 18118 - 18132 |
Liquid Organic Hydrogen Carriers as an efficient vector for the transport and storage of renewable energy
Teichmann D, Arlt W, Wasserscheid P |
| 18133 - 18139 |
Enhancement of hydrogen-storage performance of MgH2 by Mg2Ni formation and hydride-forming Ti addition
Song MY, Kwak YJ, Lee SH, Song J, Mumm DR |
| 18140 - 18147 |
Electrochemical hydrogen storage properties of Mg2-xAlxNi (x=0, 0.3, 0.5, 0.7) prepared by hydriding combustion synthesis and mechanical milling
Zhang JG, Zhu YF, Wang YC, Pu ZG, Li LQ |
| 18148 - 18154 |
Synthesis and hydrogen storage thermodynamics and kinetics of Mg(AlH4)(2) submicron rods
Liu YF, Pang YP, Zhang X, Zhou YF, Gao MX, Pan HG |
| 18155 - 18162 |
Influence of oxygen introduced in TiFe-based hydride forming alloy on its morphology, structural and hydrogen sorption properties
Davids MW, Lototskyy M |
| 18163 - 18174 |
Hydrogen sulfide removal process embedded optimization of hydrogen network
Zhou L, Liao ZW, Wang JD, Jiang BB, Yang YR |
| 18175 - 18186 |
H-2 PSA purifier for CO removal from hydrogen mixtures
You YW, Lee DG, Yoon KY, Moon DK, Kim SM, Lee CH |
| 18187 - 18204 |
Contact resistance characteristics of coated metallic bipolar plates for PEM fuel cells - investigations on the effect of manufacturing
Turan C, Cora ON, Koc M |
| 18205 - 18215 |
Nonlinear stability analysis and a new design methodology for a PEM fuel cell fed DC-DC boost converter
Giaouris D, Stergiopoulos F, Ziogou C, Ipsakis D, Banerjee S, Zahawi B, Pickert V, Voutetakis S, Papadopoulou S |
| 18216 - 18230 |
X-ray computed tomography reconstruction and analysis of polymer electrolyte membrane fuel cell porous transport layers
James JP, Choi HW, Pharoah JG |
| 18231 - 18242 |
Investigating the effects of methanol-water vapor mixture on a PBI-based high temperature PEM fuel cell
Araya SS, Andreasen SJ, Nielsen HV, Kaer SK |
| 18243 - 18260 |
Probabilistic hydrogen, thermal and electrical management of PEM-fuel cell power plants in distribution networks
Niknam T, Zare M |
| 18261 - 18271 |
Thermal analysis of air-cooled PEM fuel cells
Shahsavari S, Desouza A, Bahrami M, Kjeang E |
| 18272 - 18289 |
Evaluation for sintering of electrocatalysts and its effect on voltage drops in high-temperature proton exchange membrane fuel cells (HT-PEMFC)
Suzuki A, Oono Y, Williams MC, Miura R, Inaba K, Hatakeyama N, Takaba H, Hori M, Miyamoto A |
| 18290 - 18301 |
Microstructure and reactivity effects on the performance of Nd2NiO4+delta oxygen electrode on Ce0.9Gd0.1O1.95 electrolyte
Montenegro-Hernandez A, Mogni L, Caneiro A |
| 18302 - 18309 |
Synthesis and structural characterization of Co-doped lanthanum strontium titanates
Napolitano F, Lamas DG, Soldati A, Serquis A |
| 18310 - 18318 |
Characterization of La0.5Sr0.5Co0.5Ti0.5O3-delta as symmetrical electrode material for intermediate-temperature solid-oxide fuel cells
Martinez-Coronado R, Aguadero A, Perez-Coll D, Troncoso L, Alonso JA, Fernandez-Diaz MT |
| 18319 - 18325 |
Performances of SmBaCoCuO5+delta-Ce0.9Gd0.1O1.95 composite cathodes for intermediate-temperature solid oxide fuel cells
Lu SQ, Meng XW, Zhang YJ, Yang JH, Wei MB, Liu Y, Li XY, Fu CW, Ji Y |
| 18326 - 18341 |
On the chemical interaction of nanoscale lanthanum doped strontium titanates with common scandium and yttrium stabilized electrolyte materials
Burnat D, Heel A, Holzer L, Otal E, Kata D, Graule T |
| 18342 - 18348 |
A more efficient anode microstructure for SOFCs based on proton conductors
Rainwater BH, Liu MF, Liu ML |
| 18349 - 18356 |
H-2 and CH4 oxidation on Gd0.2Ce0.8O1.9 infiltrated SrMoO3-yttria-stabilized zirconia anode for solid oxide fuel cells
Xiao P, Ge XM, Zhang L, Lee JM, Wang JY, Wang X |
| 18357 - 18364 |
Electrochemical characterization of Pr2CuO4 cathode for IT-SOFC
Lyskov NV, Kaluzhskikh MS, Leonova LS, Mazo GN, Istomin SY, Antipov EV |
| 18365 - 18371 |
Constrained sintering of Y2O3-stabilized ZrO2 electrolyte on anode substrate
Le SR, Mao YC, Zhu XD, Zhang NQ, Sun KN |
| 18372 - 18380 |
Compliant alkali silicate sealing glass for solid oxide fuel cell applications: The effect of protective alumina coating on electrical stability in dual environment
Chou YS, Choi JP, Stevenson JW |
| 18381 - 18388 |
Optimization of Sr content in layered SmBa1-xSrxCo2O5+delta perovskite cathodes for intermediate-temperature solid oxide fuel cells
Jun A, Kim J, Shin J, Kim G |
| 18389 - 18402 |
Water management in alkaline anion exchange membrane fuel cell anode
Huo S, Deng H, Chang YF, Jiao K |
| 18403 - 18411 |
Investigation of bipolar plate geometry on direct methanol fuel cell performance
Kianimanesh A, Yu B, Yang Q, Freiheit T, Xue D, Park SS |
| 18412 - 18424 |
Modeling of dynamic operating behaviors in a liquid-feed direct methanol fuel cell
Yang WW, He YL, Li YS |
| 18425 - 18432 |
Synthesis and characterization of crosslinked poly (vinyl alcohol)/layered double hydroxide composite polymer membranes for alkaline direct ethanol cells
Zeng L, Zhao TS, Li YS |
| 18433 - 18445 |
Modelling of hydrogen perm-selective membrane reactors for catalytic methane steam reforming
Marin P, Patino Y, Diez FV, Ordonez S |
| 18446 - 18454 |
Optimization of catalyst ink composition for the preparation of a membrane electrode assembly in a proton exchange membrane fuel cell using the decal transfer
Jung CY, Kim WJ, Yi SC |
| 18455 - 18462 |
Effects of Pt loading in the anode on the durability of a membrane-electrode assembly for polymer electrolyte membrane fuel cells during startup/shutdown cycling
Eom K, Kim G, Cho E, Jang JH, Kim HJ, Yoo SJ, Kim SK, Hong BK |
| 18463 - 18470 |
An efficient decal transfer method using a roll-press to fabricate membrane electrode assemblies for direct methanol fuel cells
Mehmood A, Ha HY |
| 18471 - 18475 |
Metal-coated polycarbonate monopolar plates for portable fuel cells
Lee YH, Park T, Chang I, Ji S, Cha SW |
| 18476 - 18485 |
New synthesis method of Pd membranes over tubular PSS supports via "pore-plating" for hydrogen separation processes
Sanz R, Calles JA, Alique D, Furones L |
| 18486 - 18491 |
Effect of compression ratio and spark timing on the power performance and combustion characteristics of an HCNG engine
Ma FH, Li S, Zhao JB, Qi ZL, Deng J, Naeve N, He YT, Zhao SL |
| 18492 - 18497 |
An experimental study on performance and emission characteristics of a methane-hydrogen fuelled gasoline engine
Acikgoz B, Celik C |
| 18498 - 18508 |
DQMOM based PDF transport modeling for turbulent lifted nitrogen-diluted hydrogen jet flame with autoignition
Lee J, Kim Y |
| 18509 - 18519 |
Experimental and numerical study on the effect of composition on laminar burning velocities of H-2/CO/N-2/CO2/air mixtures
Hu EJ, Fu J, Pan L, Jiang X, Huang ZH, Zhang Y |
| 18520 - 18527 |
Combustion of aluminum-crystallohydrate mixtures
Shmelev V, Finiakov S, Cho YH |
| 18528 - 18536 |
Effect of recooling cycle on performance of hydrogen fueled scramjet
Qin J, Zhang SL, Bao W, Zhang L, Zhou WX |
| 18537 - 18546 |
The effect of pH and halides on the corrosion process of stainless steel bipolar plates for proton exchange membrane fuel cells
Laedre S, Kongstein OE, Oedegaard A, Seland F, Karoliussen H |
| 18547 - 18555 |
PdAgAu alloy with high resistance to corrosion by H2S
Braun F, Miller JB, Gellman AJ, Tarditi AM, Fleutot B, Kondratyuk P, Cornaglia LM |
| 18556 - 18562 |
Transmission electron microscopy studies of the Pd-C films obtained by physical and chemical vapor deposition
Sobczak K, Dluzewski P, Klepka MT, Kurowska B, Czerwosz E |
| 18563 - 18574 |
Evaluation of notional nozzle approaches for CFD simulations of free-shear under-expanded hydrogen jets
Papanikolaou E, Baraldi D, Kuznetsov M, Venetsanos A |
| 18575 - 18578 |
Nanostructured cadmium oxide thin films for hydrogen sensor
Dhivya P, Prasad AK, Sridharan M |
| 18579 - 18587 |
Unidirectional sensing characteristics of structured Au-GaN-Pt diodes for differential-pair hydrogen sensors
Lo C, Tan SW, Wei CY, Tsai JH, Hsu KY, Lour WS |
| 18588 - 18588 |
Preparation of New Titanium Oxy Nitride based electro catalysts Using An Anhydrous Sol-gel Method for Water Electrolysis in Acid Medium (vol 37, pg 7405, 2012)
Wang WL, Savadogo O, Ma ZF |
| 18589 - 18590 |
Integral solutions for some turbulent quantities of small-scale hydrogen leakage: Non-buoyant jet or momentum-dominated regime of buoyant jet (vol 34, pg 1607, 2009)
El-Amin MF |
