| 1 |
Experimental and computational study of the two-fluid nozzle spreading characteristics
Pezo ML, Pezo L, Dragojlovic D, Colovic R, Colovic D, Vidosavljevic S, Hadnadev M, Duragic O
Chemical Engineering Research & Design, 166, 18, 2021 |
| 2 |
Effects of droplet formation patterns on the atomization characteristics of a dust removal spray in a coal cutter
Zhou Q, Qin BT, Wang F, Wang HT, Hou J, Wang ZR
Powder Technology, 344, 570, 2019 |
| 3 |
Characteristics of piroxicam granules prepared by fluidized bed hot melt granulation
Vieira MMS, Martins RM, Freitas LAP
Advanced Powder Technology, 29(4), 934, 2018 |
| 4 |
EFFECT OF COANDA-DEFLECTION-OPENINGS ON THE SPRAY BEHAVIOR OF PRESSURE SWIRL NOZZLES
Kamplade J, Hohlfeld I, Kelz M, Thommes M, Walzel P
Atomization and Sprays, 28(3), 281, 2018 |
| 5 |
The effects of nozzle design on the combustion of wood-derived fast pyrolysis oil
Albert-Green S, Thomson MJ
Biomass & Bioenergy, 117, 102, 2018 |
| 6 |
Nozzle internal flow and spray primary breakup with the application of closely coupled split injection strategy
Wang ZM, Dai XY, Li F, Li YF, Lee CF, Wua H, Li ZS
Fuel, 228, 187, 2018 |
| 7 |
Effect of spray nozzle attachment geometry on rate of liquid released from agglomerates produced by gas-atomized liquid injection into a fluidized bed
Prociw N, Briens C, Berruti F, McMillan J
Powder Technology, 325, 280, 2018 |
| 8 |
Experimental investigation of maldistribution in vertical plate falling film tower
Kumar R, Patil D, Xiao F, Aras P
Chemical Engineering Communications, 204(11), 1237, 2017 |
| 9 |
Agglomeration in counter-current spray drying towers. Part B: Interaction between multiple spraying levels
Francia V, Martin L, Bayly AE, Simmons MJH
Powder Technology, 301, 1344, 2016 |
| 10 |
EXPERIMENTAL STUDY OF CONICAL DIESEL NOZZLE ORIFICE GEOMETRY
Hulkkonen T, Sarjovaara T, Kaario O, Hamalainen I, Larmi M
Atomization and Sprays, 25(6), 519, 2015 |
