1 |
Transition from depth to surface filtration for a low-skin effect filter subject to continuous loading of nano-aerosols Leung WWF, Choy HF Separation and Purification Technology, 190, 202, 2018 |
2 |
Estimator of the Rotor Temperature of Induction Machine Based on Terminal Voltages and Currents Popov NZ, Vukosavic SN IEEE Transactions on Energy Conversion, 32(1), 155, 2017 |
3 |
Thermal and electrical behavior of silicon rod with varying radius in a 24-rod Siemens reactor considering skin effect and wall emissivity Nie ZF, Zhou YM, Deng JS, Wen SM, Hou YQ International Journal of Heat and Mass Transfer, 111, 1142, 2017 |
4 |
Experimental and numerical investigation on mass transfer induced by electromagnetic field in cold crucible used for directional solidification Yang YH, Chen RR, Guo JJ, Ding HS, Su YQ International Journal of Heat and Mass Transfer, 114, 297, 2017 |
5 |
Solving Problems of Freezing and Blocking of Tail Gas Pipelines While Developing Oil Fields by Fire Flooding Wang CS, Xu YJ Chemistry and Technology of Fuels and Oils, 52(3), 346, 2016 |
6 |
Capture Zone of a Partially Penetrating Well with Skin Effects in Confined Aquifers Ataie-Ashtiani B, Shafei B, Rashidian-Dezfouli H, Mohamadzadeh M Transport in Porous Media, 91(2), 437, 2012 |
7 |
Optimization of Magnet Segmentation for Reduction of Eddy-Current Losses in Permanent Magnet Synchronous Machine Huang WY, Bettayeb A, Kaczmarek R, Vannier JC IEEE Transactions on Energy Conversion, 25(2), 381, 2010 |
8 |
Effect of the Variation of the Rotor Impedance With Slip on the Performance of Single-Phase Excited Three-Phase Induction Motors Abu-Elhaija WS, Muetze A IEEE Transactions on Energy Conversion, 25(4), 1010, 2010 |
9 |
Performance characterization of screen printed radio frequency identification antennas with silver nanopaste Shin DY, Lee Y, Kim CH Thin Solid Films, 517(21), 6112, 2009 |
10 |
Catalytic decomposition of trichloroethylene over Pt-/Ni-catalyst under microwave heating Takashima H, Karches M, Kanno Y Applied Surface Science, 254(7), 2023, 2008 |